vJoy Output issues

[freecodecampster]

Send CG to X/Y axes

• when resting my feet with equal weight on the Wii Balance Board (WBB) Game Controllers>vJoy Device Properties shows X/Y position settles on the far left rather than centered

Send 4 load sensors values

• Z Axis, X Rotation, Y Rotation, Z Rotation all barely register any movement

My goal is to be able to use the WBB as a rudder in flight simulation. So I'd need to be able to assign left and right sides to an axis and front-left and front-right to vJoy buttons for toe brakes.

[lshachar]

• Send CG to X/Y axes:
  While the balance board is connected and nothing on top of it - click 'tare balance board'.
  in game controllers, in Settings tab click calibrate, and go through the calibration process.

• Send 4 load sensor values:
  if you hover your mouse over that checkbox you will get a kind of helpful tooltip:
  
  well.. kind of helpful. anyways.

as I said before, you should first calibrate your device,
then each of the 4 axes will register 'full' movement much to your desire.
I think that for what you'd like to do eventually (use as flight sim pedals), you'd want to use something like ucr. share your ucr profile here if you end up making one!
(btw I'm using clutch+gas pedals for rudder and the brake pedal for wheel brake. I'm flying sailplanes, they only got one wheel and you don't taxi much! so it works great for me)

[freecodecampster]

Thanks - that worked! Didn't think of calibrating a vJoy Device as I only thought of it as a virtual device. Yeah great advice about using UCR. If the profile works I'll attach it here. Cheers 👍

[Lieutenant2014]

Thanks - that worked! Didn't think of calibrating a vJoy Device as I only thought of it as a virtual device. Yeah great advice about using UCR. If the profile works I'll attach it here. Cheers 👍

Did you ever make that profile