- 12x Threaded insert, M3, 4mm hole diameter, max 5.7mm length
- 12x Countersunk screw, M3, 8mm total length, ISO 10642
- 7x Hex nut with nylon insert, M3, ISO 10511
- 2x Hex nut with nylon insert, M2
- 7x Socket head cap screw, M3, 8mm thread length, ISO 4762 (*)
- 2x Socket head cap screw, M2, 6mm thread length, ISO 4762
- 2x Ziptie, 2mm width, 1mm thickness
- 14x 3M Bumpon SJ5302, hemispherical, 8mm diameter, 2mm height
- 2x Artificial leather, ~190x130mm, max 1.2mm thickness
- Glue for artificial leather on printed filament
- Keycaps (in photo: Akko WOB Building Blocks, MDA profile)
(*) Some of the screws are difficult to reach and require a ball-point driver, or a short-armed key.
- 2x PCB
- 1x Raspberry Pi Pico, SC0915, without pre-soldered headers
- 1x USB cable, A to micro-B with small head, shielded, max 4mm diameter
- 64x Diode, 1N4148, DO-35 through-hole format
- 64x MX switch
- 1x Bourns PEC11R-4215F-N0024 rotary encoder, M7 nut mount, 15mm flatted D-shaft
- 1x TE Flexstrip FSN-22A-8, 0.1" pitch, 2" length, 8 conductors (**)
- 1x TE Flexstrip FSN-22A-5, 0.1" pitch, 2" length, 5 conductors (**)
- 1x TE Flexstrip FSN-23A-3, 0.1" pitch, 3" length, 3 conductors (**)
(**) It might be cheaper to buy strips with more conductors and cut them apart as needed.
- 2x Body half (left, right)
- 2x Floor half (left, right)
- 2x Palm rest (left, right)
- 1x Rotary encoder knob
- 1x Diode bender jig, 7.62mm pitch (300mil)
- 12x Diode standoff jig