Replies: 5 comments 10 replies
-
For a scheduled task I'd add -e or --email |
Beta Was this translation helpful? Give feedback.
-
Dear david i ran the script but i cant still use the nvme to create the storage pool Task Scheduler has completed a triggered task. Task: Syno HDD Synology_HDD_db v3.5.103 ds920+_host_v7 version 8057 Using options: --showedits --noupdate --ram --email --autoupdate=3 HDD/SSD models found: 2 M.2 drive models found: 2 No M.2 PCIe cards found No Expansion Units found ST18000NE000-2YY101 already exists in ds920+_host_v7.db Support disk compatibility already enabled. Support memory compatibility already disabled. Max memory already set to 20 GB. NVMe support already enabled. M.2 volume support already enabled. Drive db auto updates already disabled. ST18000NE000-2YY101: WD80EFZZ-68BTXN0: Lexar 512GB SSD: WDC WDS100T2B0C-00PXH0: DSM successfully checked disk compatibility. |
Beta Was this translation helpful? Give feedback.
-
Have you rebooted? |
Beta Was this translation helpful? Give feedback.
-
4 times and the task 4 times |
Beta Was this translation helpful? Give feedback.
-
David i used the enable m2 script and it worked , but containers like grafana cant see the storage pool 1 with an error : Partition details not found filesystem=/dev/sda1 |
Beta Was this translation helpful? Give feedback.
-
Kindly advise me if i have something wrong before i run the script , i have ds920 with 4 bay hdds in shr config , an ssd configured as ssd cashe for volume 1 and an extra ssd wich i am planing to use the script for in order to create volume 2 for docker conatiner manager
I read the script and conclued to put
/volume1/DS920/Synology_HDD_DB/syno_hdd_db.sh --showedits --noupdate --ram -S --autoupdate=3
As a schedule task at bootup
Can i now run the task and everything in my command is right and cope with my nas or is there something i need to change. Thanks
Beta Was this translation helpful? Give feedback.
All reactions