Skip to content

Latest commit

 

History

History
360 lines (355 loc) · 58.9 KB

arm_sbsa_testcase_checklist.rst

File metadata and controls

360 lines (355 loc) · 58.9 KB
Raw

SBSA ACS Testcase checklist

The below table provides the following details

  1. SBSA Level at which test run.
  2. SBSA rules covered by a test.
  3. SystemReady certification band(SR) for which test is required.
  4. Runtime environment(UEFI, BareMetal and Linux) where test executes.
  5. Tests for which exerciser is required.
Test No Test Description Level Rule ID SR UEFI BareMetal* Linux Exerciser Required?
1 Check PE Granule Support L3 S_L3PE_01 Yes Yes Yes No No
2 Check for 16-bit ASID support L3 S_L3PE_02 Yes Yes Yes No No
3 Check AARCH64 implementation L3 S_L3PE_03 Yes Yes Yes No No
4 Check FEAT_LPA Requirements L3 S_L3PE_04 Yes Yes Yes No No
5 Check for RAS extension L4 S_L4PE_01 Yes Yes Yes No No
6 Check DC CVAP support L4 S_L4PE_02 Yes Yes Yes No No
7 Check for 16-Bit VMID L4 S_L4PE_03 Yes Yes Yes No No
8 Check for Virtual host extensions L4 S_L4PE_04 Yes Yes Yes No No
9 Support Page table map size change L5 S_L5PE_01 Yes Yes Yes No No
10 Check for addr and generic auth L5 S_L5PE_02 Yes Yes Yes No No
11 Check Activity monitors extension L5 S_L5PE_04 Yes Yes Yes No No
12 Check for SHA3 and SHA512 support L5 S_L5PE_05 Yes Yes Yes No No
13 Stage 2 control of mem and cache L5 S_L5PE_06 Yes Yes Yes No No
14 Check for nested virtualization L5 S_L5PE_07 Yes Yes Yes No No
15 Check MPAM PE Requirements L5 S_MPAM_PE Yes Yes Yes No No
16 Check MPAM LLC Requirements L5 S_MPAM_PE Yes Yes Yes No No
17 Check SPE if implemented L6 B_PE_17 Yes Yes Yes No No
18 Check Branch Target Support L6 S_L6PE_02 Yes Yes Yes No No
19 Check Protect Against Timing Fault L6 S_L6PE_03 Yes Yes Yes No No
20 Check PMU Version Support L6 S_L6PE_04 Yes Yes Yes No No
21 Check AccessFlag DirtyState Update L6 S_L6PE_05 Yes Yes Yes No No
22 Check Enhanced Virtualization Trap L6 S_L6PE_06 Yes Yes Yes No No
23 Check Speculation Restriction L6 B_SEC_01 Yes Yes Yes No No
24 Check Speculative Str Bypass Safe L6 B_SEC_02 Yes Yes Yes No No
25 Check PEs Impl CSDB,SSBB,PSSBB L6 B_SEC_03 Yes Yes Yes No No
26 Check PEs Implement SB Barrier L6 B_SEC_04 Yes Yes Yes No No
27 Check PE Impl CFP,DVP,CPP RCTX L6 B_SEC_05 Yes Yes Yes No No
28 Check Fine Grain Trap Support L7 S_L7PE_01 Yes Yes Yes No No
29 Check for ECV support L7 S_L7PE_02 Yes Yes Yes No No
31 Checks ASIMD Int8 matrix multiplc L7 S_L7PE_04 Yes Yes Yes No No
32 Check for BFLOAT16 extension L7 S_L7PE_05 Yes Yes Yes No No
33 Check PAuth2, FPAC & FPACCOMBINE L7 S_L7PE_06 Yes Yes Yes No No
34 Check for SVE Int8 matrix multiplc L7 S_L7PE_07 Yes Yes Yes No No
37 Check for enhanced PAN feature FR S_L8PE_04 Yes Yes Yes No No
38 Check XS attribute functionality FR S_L8PE_01 Yes Yes Yes No No
39 Check WFET and WFIT functionality FR S_L8PE_02 Yes Yes Yes No No
40 Check atomic 64 byte store support FR S_L8PE_03 Yes Yes Yes No No
20 Check PMU Version Support FR S_L8PE_05 Yes Yes Yes No No
41 Check for FEAT_BRBE support FR S_L8PE_06 Yes Yes Yes No No
42 Check for unsupported PBHA bits FR S_L8PE_07 Yes Yes Yes No No
101 Check peripherals addr 64Kb apart L3 S_L3MM_01, S_L3MM_02 Yes Yes Yes No No
201 Check GIC version L3 S_L3GI_01 Yes Yes Yes No No
202 Check Reserved PPI Assignments L5 S_L5PP_01 Yes Yes Yes No No
301 Check SMMU Compatibility L4 S_L4SM_01, S_L4SM_02 Yes Yes Yes No No
302 Check SMMUv3.2 or higher L5 S_L5SM_01, S_L5SM_02 Yes Yes Yes No No
303 Check S-EL2 & SMMU Stage1 support L5 B_SMMU_09 Yes Yes Yes No No
304 Check S-EL2 & SMMU Stage2 Support L5 B_SMMU_20 Yes Yes Yes No No
305 Check SMMU for MPAM support L5 B_SMMU_11, B_SMMU_22, S_L5SM_03 Yes Yes Yes No No
306 Check SMMU HTTU Support L6 S_L6SM_02 Yes Yes Yes No No
307 Check SMMU MSI Support L6 S_L6SM_03 Yes Yes Yes No No
308 Check SMMU 16 Bit VMID Support L6 B_SMMU_23 Yes Yes Yes No No
309 Check SMMU Large VA Support L6 B_SMMU_03 Yes Yes Yes No No
310 Check TLB Range Invalidation L6 B_SMMU_04, B_SMMU_05 Yes Yes Yes No No
311 Check SMMU 16 Bit ASID Support L6 B_SMMU_13 Yes Yes Yes No No
312 Check SMMU Endianess Support L6 B_SMMU_14 Yes Yes Yes No No
313 Check SMMU Coherent Access Support L4 S_L4SM_03 Yes Yes Yes No No
314 Check SMMU PMU Extension L7 S_L7SM_03, S_L7SM_04 Yes Yes Yes No No
315 Check if all DMA reqs behind SMMU L7 S_L7SM_01 Yes Yes Yes No No
316 Check for SMMU/CATU in ETR Path L7 S_L7SM_02 Yes Yes# Yes Yes No
302 Check SMMUv3.2 or higher FR S_L8SM_01 Yes Yes# Yes Yes No
317 Check ATS and Page Req Support FR GPU_04 Yes Yes Yes No No
601 Check EA Capability L4 S_L4PCI_2 Yes Yes Yes No No
701 Check NS Watchdog Revision L6 S_L6WD_01 Yes Yes Yes No No
801 Check ECAM Presence L6 PCI_IN_01 Yes Yes Yes No No
803 Check ECAM Memory accessibility L6 PCI_IN_02 Yes Yes Yes No No
805 PCIe Unaligned access, Norm mem L6 PCI_MM_01, PCI_MM_02, PCI_MM_03, RE_BAR_2, IE_BAR_2 Yes Yes# Yes Yes No
809 Check all MSI=X vectors are LPIs L3 S_L3GI_02 Yes Yes# Yes Yes No
816 NP type-1 pcie only support 32-bit L6 PCI_MM_04 Yes Yes Yes No No
820 Check Type 0/1 common config rules L6 RE_REG_1, IE_REG_1, IE_REG_3 Yes Yes Yes No No
821 Check Type 0 config header rules L6 RE_REG_1, IE_REG_1 Yes Yes Yes No No
822 Check Type 1 config header rules L6 IE_REG_3 Yes Yes Yes No No
823 Check PCIe capability rules L6 IE_REG_4 Yes Yes Yes No No
824 Check Device capabilites reg rules L6 RE_REG_3, RE_REC_1, IE_REG_2, IE_REG_4 Yes Yes Yes No No
825 Check Device Control register rule L6 RE_REG_3, RE_REC_1, IE_REG_2, IE_REG_4 Yes Yes Yes No No
826 Check Device cap 2 register rules L6 RE_REG_3, RE_REC_1, IE_REG_2, IE_REG_4 Yes Yes Yes No No
827 Check Device control 2 reg rules L6 RE_REG_3, RE_REC_1, IE_REG_2, IE_REG_4 Yes Yes Yes No No
828 Check Power management cap rules L6 RE_REG_2, IE_REG_5 Yes Yes Yes No No
829 Check Power management/status rule L6 RE_REG_2, IE_REG_5 Yes Yes Yes No No
830 Check Cmd Reg memory space enable L6 RE_REG_1, IE_REG_1, IE_REG_3 Yes Yes Yes No No
831 Check Type0/1 BIST Register rule L6 RE_REG_1, IE_REG_1, IE_REG_3 Yes Yes Yes No No
832 Check HDR CapPtr Register rule L6 RE_REG_1, IE_REG_1, IE_REG_3 Yes Yes Yes No No
833 Check Max payload size supported L6 RE_REC_1, IE_REG_2, IE_REG_4 Yes Yes Yes No No
834 Check BAR memory space & Type rule L6 RE_BAR_3, IE_BAR_3 Yes Yes Yes No No
835 Check Function level reset rule L6 RE_RST_1, IE_RST_1, PCI_SM_02 Yes Yes Yes No No
836 Check ARI forwarding support rule L6 PCI_IN_17 Yes Yes Yes No No
837 Check OBFF supported rule L6 IE_REG_2 Yes Yes Yes No No
838 Check CTRS and CTDS rule L6 IE_REG_4 Yes Yes Yes No No
839 Check i-EP atomicop rule L6 |IE_REG_2 Yes Yes Yes No No
840 PCIe RC,PE - Same Inr Shareable Domain L3 |PCI_IC_11 Yes Yes Yes No No
841 Check MSI and MSI-X support rule L6 RE_INT_1, IE_INT_1 Yes Yes Yes No No
842 Check Power Management rules L6 RE_PWR_1, IE_PWR_1 Yes Yes Yes No No
843 Check ARI forwarding enable rule L6 PCI_IN_17 Yes Yes Yes No No
844 Check device under RP in same ECAM L6 PCI_IN_04 Yes Yes Yes No No
845 Check all RP in HB is in same ECAM L6 PCI_IN_03 Yes Yes Yes No No
846 Check RP Byte Enable Rules L6 PCI_IN_18 Yes Yes Yes No No
847 Check Config Txn for RP in HB L6 PCI_IN_12 Yes Yes Yes No No
848 Check RootPort NP Memory Access L6 PCI_IN_13 No Yes# Yes No No
849 Check RootPort P Memory Access L6 PCI_IN_13 No Yes# Yes No No
850 Check L-Intr SPI Level-Sensitive L6 PCI_LI_01, PCI_LI_03 Yes Yes Yes No No
851 Check Sec Bus Reset For iEP_RP L6 IE_RST_2 Yes Yes Yes No No
852 Check ATS Support Rule L6 IE_SMU_1, RE_SMU_2 Yes Yes Yes No No
856 Check iEP-RootPort P2P Support L6 IE_ACS_2 Yes Yes Yes No No
857 Check RCiEP, iEP_EP P2P Supp L6 IE_ACS_1, RE_ACS_1, RE_ACS_2 Yes Yes Yes No No
858 Read and write to BAR reg L6 RE_BAR_1, IE_BAR_1 Yes Yes Yes No No
859 Check RCEC Class code and Ext Cap L6 RE_PCI_2 Yes Yes Yes No No
860 Check RCiEP Hdr type & link Cap L6 RE_PCI_1 Yes Yes Yes No No
861 Check RootPort P&NP Memory Access L7 S_PCIe_02 Yes Yes Yes No No
863 Slot Cap, Control and Status register rules L6 IE_REG_4 Yes Yes Yes No No
864 Check ATS & Page Req for all RP FR GPU_04 Yes Yes Yes No No
865 Check RP Extensions for DPC FR PCI_ER_09 Yes Yes Yes No No
866 Steering Tag value properties FR S_PCIe_11 Yes Yes# Yes Yes No
867 Check Supported Link Speed for iEPs L6 IE_REG_6, IE_REG_7, IE_REG_8, IE_REG_9 Yes Yes Yes Yes No
901 Enhanced ECAM Memory access check L3 PCI_IN_01, PCI_IN_02 No Yes Yes No Yes
902 PCIe Address translation check L6 RE_SMU_2 No Yes Yes No Yes
903 ATS Functionality Check L6 RE_SMU_2 No Yes Yes No Yes
904 Arrival order & Gathering Check L6 RE_ORD_1, RE_ORD_2, IE_ORD_1, IE_ORD_2 No Yes Yes No Yes
905 PE 2/4/8B writes tp PCIe as 2/4/8B L7 S_PCIe_03 No Yes Yes No Yes
906 RP's must support AER feature L7 PCI_ER_01, PCI_ER_04 No Yes Yes No Yes
907 RP's must support DPC L7 PCI_ER_05, PCI_ER_06 No Yes Yes No Yes
908 Check 2/4/8 Bytes targeted writes L7 S_PCIe_04 No Yes Yes No Yes
909 Check Relaxed Ordering of writes FR S_PCIe_07, S_PCIe_08 No Yes Yes No Yes
910 DPC trig when RP-PIO unimplemented FR PCI_ER_10 No Yes Yes No Yes
911 RAS ERR record for poisoned data FR PCI_ER_08 No Yes Yes No Yes
912 RAS ERR record for external abort FR PCI_ER_07 No Yes Yes No Yes
913 Enable and disable STE.DCP bit FR S_PCIe_10 No Yes Yes No Yes
1001 Check for MPAM extension L7 S_L7MP_01, S_L7MP_02 Yes Yes Yes No No
1002 Check for MPAM LLC CSU L7 S_L7MP_03, S_L7MP_04 Yes Yes Yes No No
1003 Check for MPAM MBWUs Monitor func L7 S_L7MP_05, S_L7MP_06 Yes Yes Yes No No
1004 Check for MBWU counter size L7 S_L7MP_07 Yes Yes Yes No No
1005 Check for MPAM MSC address overlap L7 S_L7MP_08 Yes Yes Yes No No
1006 Check PMG storage by CPOR nodes L7 S_L7MP_03 Yes Yes Yes No No
1101 Check PMU Overflow signal L7 PMU_PE_02 Yes Yes Yes No No
1102 Check number of PMU counters L7 PMU_PE_03 Yes Yes Yes No No
1103 Check for multi-threaded PMU ext L7 PMU_EV_11 Yes Yes Yes No No
1104 Check memory bandwidth monitors L7 PMU_BM_1, PMU_SYS_1, PMU_SYS_2 Yes Yes Yes No No
1105 Check memory latency monitors L7 PMU_MEM_1, PMU_SYS_1, PMU_SYS_2 Yes Yes Yes No No
1106 Check for PMU SPE Requirements L7 PMU_SPE Yes Yes Yes No No
1107 Check PCIe bandwidth monitors L7 PMU_BM_2, PMU_SYS_1, PMU_SYS_2 Yes Yes Yes No No
1109 Check multiple types of traffic measurement L7 PMU_SYS_6 Yes Yes Yes No No
1201 Check Error Counter L7 RAS_01 Yes Yes Yes No No
1202 Check CFI, DUI, UI Controls L7 RAS_02 Yes Yes Yes No No
1203 Check FHI in Error Record Group L7 RAS_03 Yes Yes Yes No No
1204 Check ERI in Error Record Group L7 RAS_04 Yes Yes Yes No No
1205 Check ERI/FHI Connected to GIC L7 RAS_06 Yes Yes Yes No No
1206 RAS ERR<n>ADDR.AI bit status check L7 RAS_07 Yes Yes Yes No No
1207 Check Error Group Status L7 RAS_08 Yes Yes Yes No No
1208 Software Fault Error Check L7 RAS_11, RAS_12 Yes Yes Yes No No
1209 Data abort on Containable err L7 S_L7RAS_1 Yes Yes Yes No No
1210 Check for patrol scrubbing support L7 SYS_RAS_1 Yes Yes Yes No No
1211 Check Poison Storage & Forwarding L7 SYS_RAS_2, SYS_RAS_3 Yes Yes Yes No No
1212 Check Pseudo Fault Injection L7 SYS_RAS_2 Yes Yes Yes No No
1213 Check RAS memory mapped view supp FR SYS_RAS_4 Yes Yes Yes No No
1214 Check RAS SR Interface ERI/FHI are PPI L6 S_RAS_01 Yes Yes Yes No No
1301 NIST Statistical Test Suite L7 S_L7ENT_1 Yes Yes Yes No No
1401 Check for FEAT_ETE FR ETE_02 Yes Yes Yes No No
1402 Check trace unit ETE supports FR ETE_03 Yes Yes Yes No No
1403 Check ETE Trace Timestamp Source FR ETE_04, ETE_06 Yes Yes Yes No No
1404 Check Trace Same Timestamp Source FR ETE_05 Yes Yes Yes No No
1405 Check for FEAT_TRBE FR ETE_07 Yes Yes Yes No No
1406 Check trace buffers flag updates FR ETE_08 Yes Yes Yes No No
1407 Check TRBE trace buffers alignment FR ETE_09 Yes Yes Yes No No
1408 Check GICC TRBE Interrupt field FR ETE_10 Yes Yes Yes No No
PMU app IPC events L7 PMU_EV_01 Yes No No Yes No
PMU app Cache effectiveness L7 PMU_EV_02 Yes No No Yes No
PMU app TLB effectiveness L7 PMU_EV_03 Yes No No Yes No
PMU app Cycle accounting L7 PMU_EV_05 Yes No No Yes No
PMU app top down accounting L7 PMU_EV_06 Yes No No Yes No
PMU app Workload events L7 PMU_EV_07 Yes No No Yes No
PMU app Branch predictor effectiveness events L7 PMU_EV_08 Yes No No Yes No
PMU app BR_RETIRED L7 PMU_EV_09 Yes No No Yes No
PMU app Latency events L7 PMU_EV_10 Yes No No Yes No

For running tests on a bare-metal environment, integration of ACS with platform boot code is required. See arm SBSA Bare-metal User Guide