diff --git a/projects.yaml b/projects.yaml index 58de0b43a1..555383da1e 100644 --- a/projects.yaml +++ b/projects.yaml @@ -518,6 +518,10 @@ projects: - *module_if - *module_hic_max32620 - records/board/max32625mbed.yaml + max32625_max32625pico_if: + - *module_if + - *module_hic_max32625 + - records/board/max32625pico.yaml max32625_max32620fthr_if: - *module_if - *module_hic_max32625 diff --git a/records/board/max32625pico.yaml b/records/board/max32625pico.yaml new file mode 100644 index 0000000000..9c8e36df84 --- /dev/null +++ b/records/board/max32625pico.yaml @@ -0,0 +1,7 @@ +common: + sources: + board: + - source/board/max32625pico.c + family: + - source/family/maxim/max32625/target.c + - source/family/maxim/target_reset_max32xxx.c diff --git a/source/board/max32625pico.c b/source/board/max32625pico.c new file mode 100644 index 0000000000..95ae7406b0 --- /dev/null +++ b/source/board/max32625pico.c @@ -0,0 +1,35 @@ +/** + * @file max32625pico.c + * @brief board ID for the Analog Devices's MAX32625PICO + * + * Copyright (c) 2023 Analog Devices, Inc. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#include "target_family.h" +#include "target_board.h" + +const board_info_t g_board_info = { + .info_version = kBoardInfoVersion, + .board_id = "0416", + .family_id = kMaxim_MAX3262X_FamilyID, + .flags = kEnablePageErase, + .target_cfg = &target_device, + .daplink_url_name = "MAX32625HTM", + .daplink_target_url = "http://www.analog.com/max32625pico", + .board_vendor = "Analog Devices", + .board_name = "MAX32625PICO", +}; diff --git a/source/family/maxim/max32625/target_reset.c b/source/family/maxim/max32625/target_reset.c deleted file mode 100644 index 44530f5161..0000000000 --- a/source/family/maxim/max32625/target_reset.c +++ /dev/null @@ -1,54 +0,0 @@ -/** - * @file target_reset.c - * @brief Target reset for the MAX32625 - * - * DAPLink Interface Firmware - * Copyright (c) 2009-2016, ARM Limited, All Rights Reserved - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#include "swd_host.h" - -void target_before_init_debug(void) -{ - // any target specific sequences needed before attaching - // to the DAP across JTAG or SWD - return; -} - -uint8_t target_unlock_sequence(void) -{ - // if the device can secure the flash and there is a way to - // erase all it should be implemented here. - return 1; -} - -uint8_t target_set_state(target_state_t state) -{ - // invoke reset by sw (VECT_REQ or SYS_REQ) or hw (hardware IO toggle) - // return swd_set_target_state_sw(state); - //or - return swd_set_target_state_hw(state); -} - -uint8_t security_bits_set(uint32_t addr, uint8_t *data, uint32_t size) -{ - // if there are security bits in the programmable flash region - // a check should be performed. This method is used when programming - // by drag-n-drop and should refuse to program an image requesting - // to set the device security. This can be performed with the debug channel - // if needed. - return 0; -} diff --git a/test/info.py b/test/info.py index ec6eb115c1..8c7c96eac5 100644 --- a/test/info.py +++ b/test/info.py @@ -1,6 +1,7 @@ # # DAPLink Interface Firmware # Copyright (c) 2009-2019, ARM Limited, All Rights Reserved +# Portions Copyright (c) 2023 Analog Devices, Inc. # SPDX-License-Identifier: Apache-2.0 # # Licensed under the Apache License, Version 2.0 (the "License"); you may @@ -92,6 +93,7 @@ ('lpc11u35_musca_b_if', False, 0x0000, "bin" ), ('lpc11u35_musca_b_eflash_if', False, 0x0000, "bin" ), ('max32620_max32625mbed_if', False, 0x0000, "bin" ), + ('max32625_max32625pico_if', False, 0x0000, "bin" ), ('max32625_max32620fthr_if', False, 0x0000, "bin" ), ('max32625_max32630fthr_if', False, 0x0000, "bin" ), ('max32625_max32660evsys_if', False, 0x0000, "bin" ), @@ -173,6 +175,7 @@ def VENDOR_TO_FAMILY(x, y) : return (VENDOR_ID[x] <<8) | y ( 0x0360, VENDOR_TO_FAMILY('NXP', 6), 'lpc4322_hani_iot_if', 'lpc4322_bl', 'HANI-IOT' ), ( 0x0409, VENDOR_TO_FAMILY('Stub', 1), 'max32625_max32630fthr_if', 'max32625_bl', 'MAX32630' ), ( 0x0415, VENDOR_TO_FAMILY('Stub', 1), 'max32620_max32625mbed_if', 'max32620_bl', 'MAX32625' ), + ( 0x0416, VENDOR_TO_FAMILY('Stub', 1), 'max32625_max32625pico_if', 'max32625_bl', 'MAX32625' ), ( 0x0418, VENDOR_TO_FAMILY('Stub', 1), 'max32625_max32620fthr_if', 'max32625_bl', 'MAX32620' ), ( 0x0421, VENDOR_TO_FAMILY('Stub', 1), 'max32625_max32660evsys_if', 'max32625_bl', 'MAX32660' ), ( 0x0422, VENDOR_TO_FAMILY('Stub', 1), 'max32625_max32666fthr_if', 'max32625_bl', 'MAX32666' ), @@ -305,6 +308,7 @@ def VENDOR_TO_FAMILY(x, y) : return (VENDOR_ID[x] <<8) | y 0x0311, # K66F 0x0409, # MAX32630FTHR 0x0415, # MAX32625MBED + 0x0416, # MAX32625PICO 0x0418, # MAX32620FTHR 0x0421, # MAX32660EVSYS 0x0422, # MAX32666FTHR