Does not router between routers and does not detect all network devices

[alexcool83]

Inserts in the router section other devices in addition to the router which is an Archer MR600.

It also does not detect all the devices on the network.

Still, it returns several sensors as "not available", but I think because the router does not have the functions.

[AlexandrErohin]

If element is not available - that means the router doesnt have this feature.
In the UI HomeAssistant connects all integration that have connected devices
Do you have more then 17 clients on your network?

[alexcool83]

I have an MR600 router with 2 RE315 TpLink extenders, managed in Mesh in AP mode. So who manages everything is the gateway router, below what I'm detealing at the moment...39 devices of which 6 are wired. Instead, the integration detects a total of 19 of which 1 is wired.

[alexcool83]

It seems that the integration does not point to the gateway but to the 2 extenders that have static addresses 192.168.1.2/192.168.1.3.

I only say this because the total of the two extenders corresponds to the totals of the integration.

[AlexandrErohin]

You may try to play with client https://github.com/AlexandrErohin/TP-Link-Archer-C6U and check the router responses

[alexcool83]

I was trying in appdaemon but I'm doing something wrong, can you give me some more instruction?

[alexcool83]

After working on it for a while, I realized that devices that are connected to the wifi-extender but that are always pointed and visible to the main TPlink router are not detected. Do you have any suggestions?

[AlexandrErohin]

If the router doesnt provide them via API - there is nothing that this integration can do