diff --git a/Config files/print/0.15mm @E2 0.6.ini b/Config files/print/0.15mm @E2 0.6.ini index 23fa0b6..f9aed14 100644 --- a/Config files/print/0.15mm @E2 0.6.ini +++ b/Config files/print/0.15mm @E2 0.6.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.3.0-rc2+win64 on 2020-12-27 at 18:56:18 UTC +# generated by PrusaSlicer 2.3.0+win64 on 2021-03-04 at 09:45:02 UTC avoid_crossing_perimeters = 0 avoid_crossing_perimeters_max_detour = 0 bottom_fill_pattern = monotonic @@ -6,7 +6,7 @@ bottom_solid_layers = 5 bottom_solid_min_thickness = 0.5 bridge_acceleration = 0 bridge_angle = 0 -bridge_flow_ratio = 0.95 +bridge_flow_ratio = 1.4 bridge_speed = 25 brim_width = 0 clip_multipart_objects = 1 @@ -17,10 +17,10 @@ default_acceleration = 0 dont_support_bridges = 1 draft_shield = 0 elefant_foot_compensation = 0.2 -ensure_vertical_shell_thickness = 1 -external_perimeter_extrusion_width = 0.65 +ensure_vertical_shell_thickness = 0 +external_perimeter_extrusion_width = 0.68 external_perimeter_speed = 35 -external_perimeters_first = 0 +external_perimeters_first = 1 extra_perimeters = 0 extruder_clearance_height = 27 extruder_clearance_radius = 52 @@ -40,10 +40,10 @@ infill_anchor = 2.5 infill_anchor_max = 15 infill_every_layers = 1 infill_extruder = 1 -infill_extrusion_width = 0.65 +infill_extrusion_width = 0.68 infill_first = 0 infill_only_where_needed = 0 -infill_overlap = 30% +infill_overlap = 0% infill_speed = 70 inherits = interface_shells = 0 @@ -54,23 +54,23 @@ ironing_speed = 15 ironing_type = top layer_height = 0.15 max_print_speed = 90 -max_volumetric_speed = 20 +max_volumetric_speed = 0 min_skirt_length = 4 notes = only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}_{total_weight}g.gcode -overhangs = 0 +overhangs = 1 perimeter_acceleration = 0 perimeter_extruder = 1 -perimeter_extrusion_width = 0.65 +perimeter_extrusion_width = 0.68 perimeter_speed = 45 perimeters = 2 post_process = print_settings_id = raft_layers = 0 resolution = 0 -seam_position = nearest +seam_position = aligned single_extruder_multi_material_priming = 0 skirt_distance = 2 skirt_height = 3 @@ -80,7 +80,7 @@ small_perimeter_speed = 25 solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.65 +solid_infill_extrusion_width = 0.68 solid_infill_speed = 60 spiral_vase = 0 standby_temperature_delta = -5 @@ -88,24 +88,24 @@ support_material = 0 support_material_angle = 0 support_material_auto = 1 support_material_buildplate_only = 0 -support_material_contact_distance = 0.25 +support_material_contact_distance = 0.2 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0.55 support_material_interface_contact_loops = 0 support_material_interface_extruder = 1 -support_material_interface_layers = 4 -support_material_interface_spacing = 0.2 +support_material_interface_layers = 3 +support_material_interface_spacing = 5 support_material_interface_speed = 100% support_material_pattern = rectilinear -support_material_spacing = 3 +support_material_spacing = 2.5 support_material_speed = 45 support_material_synchronize_layers = 0 support_material_threshold = 45 -support_material_with_sheath = 0 -support_material_xy_spacing = 75% +support_material_with_sheath = 1 +support_material_xy_spacing = 50% thin_walls = 0 -threads = 12 +threads = 16 top_fill_pattern = monotonic top_infill_extrusion_width = 0.6 top_solid_infill_speed = 60 diff --git a/Config files/print/0.20mm @E2 0.6.ini b/Config files/print/0.20mm @E2 0.6.ini index ecfca9d..2b1d0c3 100644 --- a/Config files/print/0.20mm @E2 0.6.ini +++ b/Config files/print/0.20mm @E2 0.6.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.3.0-rc2+win64 on 2020-12-27 at 18:55:51 UTC +# generated by PrusaSlicer 2.3.0+win64 on 2021-03-04 at 09:43:35 UTC avoid_crossing_perimeters = 0 avoid_crossing_perimeters_max_detour = 0 bottom_fill_pattern = monotonic @@ -6,8 +6,8 @@ bottom_solid_layers = 4 bottom_solid_min_thickness = 0.5 bridge_acceleration = 0 bridge_angle = 0 -bridge_flow_ratio = 0.95 -bridge_speed = 25 +bridge_flow_ratio = 1.4 +bridge_speed = 15 brim_width = 0 clip_multipart_objects = 1 compatible_printers = @@ -17,10 +17,10 @@ default_acceleration = 0 dont_support_bridges = 1 draft_shield = 0 elefant_foot_compensation = 0.2 -ensure_vertical_shell_thickness = 1 -external_perimeter_extrusion_width = 0.65 +ensure_vertical_shell_thickness = 0 +external_perimeter_extrusion_width = 0.68 external_perimeter_speed = 35 -external_perimeters_first = 0 +external_perimeters_first = 1 extra_perimeters = 0 extruder_clearance_height = 27 extruder_clearance_radius = 52 @@ -37,13 +37,13 @@ gcode_comments = 0 gcode_label_objects = 0 infill_acceleration = 0 infill_anchor = 2.5 -infill_anchor_max = 15 +infill_anchor_max = 12 infill_every_layers = 1 infill_extruder = 1 -infill_extrusion_width = 0.65 +infill_extrusion_width = 0.68 infill_first = 0 infill_only_where_needed = 0 -infill_overlap = 30% +infill_overlap = 0% infill_speed = 70 inherits = interface_shells = 0 @@ -54,23 +54,23 @@ ironing_speed = 15 ironing_type = top layer_height = 0.2 max_print_speed = 90 -max_volumetric_speed = 20 +max_volumetric_speed = 0 min_skirt_length = 4 notes = -only_retract_when_crossing_perimeters = 0 +only_retract_when_crossing_perimeters = 1 ooze_prevention = 0 output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}_{total_weight}g.gcode -overhangs = 0 +overhangs = 1 perimeter_acceleration = 0 perimeter_extruder = 1 -perimeter_extrusion_width = 0.65 +perimeter_extrusion_width = 0.68 perimeter_speed = 45 perimeters = 2 post_process = print_settings_id = raft_layers = 0 resolution = 0 -seam_position = nearest +seam_position = aligned single_extruder_multi_material_priming = 0 skirt_distance = 2 skirt_height = 3 @@ -80,32 +80,32 @@ small_perimeter_speed = 25 solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.65 -solid_infill_speed = 60 +solid_infill_extrusion_width = 0.68 +solid_infill_speed = 70 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 support_material_auto = 1 support_material_buildplate_only = 0 -support_material_contact_distance = 0.25 +support_material_contact_distance = 0.2 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0.55 support_material_interface_contact_loops = 0 support_material_interface_extruder = 1 -support_material_interface_layers = 4 -support_material_interface_spacing = 0.2 +support_material_interface_layers = 3 +support_material_interface_spacing = 5 support_material_interface_speed = 100% support_material_pattern = rectilinear -support_material_spacing = 3 -support_material_speed = 45 +support_material_spacing = 2.5 +support_material_speed = 50 support_material_synchronize_layers = 0 support_material_threshold = 45 -support_material_with_sheath = 0 -support_material_xy_spacing = 75% +support_material_with_sheath = 1 +support_material_xy_spacing = 50% thin_walls = 0 -threads = 12 +threads = 16 top_fill_pattern = monotonic top_infill_extrusion_width = 0.6 top_solid_infill_speed = 60 diff --git a/Config files/print/0.30mm @E2 0.6.ini b/Config files/print/0.30mm @E2 0.6.ini index 48b6cd2..00bfa2e 100644 --- a/Config files/print/0.30mm @E2 0.6.ini +++ b/Config files/print/0.30mm @E2 0.6.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.3.0-rc2+win64 on 2020-12-27 at 18:55:56 UTC +# generated by PrusaSlicer 2.3.0+win64 on 2021-03-04 at 09:43:57 UTC avoid_crossing_perimeters = 0 avoid_crossing_perimeters_max_detour = 0 bottom_fill_pattern = monotonic @@ -6,8 +6,8 @@ bottom_solid_layers = 4 bottom_solid_min_thickness = 0.5 bridge_acceleration = 0 bridge_angle = 0 -bridge_flow_ratio = 0.95 -bridge_speed = 25 +bridge_flow_ratio = 1.4 +bridge_speed = 15 brim_width = 0 clip_multipart_objects = 1 compatible_printers = @@ -17,10 +17,10 @@ default_acceleration = 0 dont_support_bridges = 1 draft_shield = 0 elefant_foot_compensation = 0.2 -ensure_vertical_shell_thickness = 1 -external_perimeter_extrusion_width = 0.65 -external_perimeter_speed = 35 -external_perimeters_first = 0 +ensure_vertical_shell_thickness = 0 +external_perimeter_extrusion_width = 0.68 +external_perimeter_speed = 72 +external_perimeters_first = 1 extra_perimeters = 0 extruder_clearance_height = 27 extruder_clearance_radius = 52 @@ -32,19 +32,19 @@ first_layer_acceleration = 0 first_layer_extrusion_width = 0.65 first_layer_height = 0.3 first_layer_speed = 15 -gap_fill_speed = 50 +gap_fill_speed = 25 gcode_comments = 0 gcode_label_objects = 0 infill_acceleration = 0 infill_anchor = 2.5 -infill_anchor_max = 15 +infill_anchor_max = 12 infill_every_layers = 1 infill_extruder = 1 -infill_extrusion_width = 0.65 +infill_extrusion_width = 0.68 infill_first = 0 infill_only_where_needed = 0 -infill_overlap = 30% -infill_speed = 70 +infill_overlap = 0 +infill_speed = 72 inherits = interface_shells = 0 ironing = 0 @@ -53,62 +53,62 @@ ironing_spacing = 0.15 ironing_speed = 15 ironing_type = top layer_height = 0.3 -max_print_speed = 90 -max_volumetric_speed = 20 +max_print_speed = 130 +max_volumetric_speed = 0 min_skirt_length = 4 notes = only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}_{total_weight}g.gcode -overhangs = 0 +overhangs = 1 perimeter_acceleration = 0 perimeter_extruder = 1 -perimeter_extrusion_width = 0.65 -perimeter_speed = 45 -perimeters = 2 +perimeter_extrusion_width = 0.68 +perimeter_speed = 80 +perimeters = 4 post_process = print_settings_id = raft_layers = 0 resolution = 0 -seam_position = nearest +seam_position = aligned single_extruder_multi_material_priming = 0 skirt_distance = 2 skirt_height = 3 skirts = 1 slice_closing_radius = 0.049 -small_perimeter_speed = 25 +small_perimeter_speed = 27 solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.65 -solid_infill_speed = 70 +solid_infill_extrusion_width = 0.68 +solid_infill_speed = 72 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 support_material_auto = 1 support_material_buildplate_only = 0 -support_material_contact_distance = 0.15 +support_material_contact_distance = 0.2 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0.55 support_material_interface_contact_loops = 0 support_material_interface_extruder = 1 -support_material_interface_layers = 4 -support_material_interface_spacing = 0.2 +support_material_interface_layers = 3 +support_material_interface_spacing = 5 support_material_interface_speed = 100% support_material_pattern = rectilinear -support_material_spacing = 3 +support_material_spacing = 2.5 support_material_speed = 45 support_material_synchronize_layers = 0 support_material_threshold = 45 -support_material_with_sheath = 0 -support_material_xy_spacing = 75% +support_material_with_sheath = 1 +support_material_xy_spacing = 50% thin_walls = 0 -threads = 12 +threads = 16 top_fill_pattern = monotonic top_infill_extrusion_width = 0.6 -top_solid_infill_speed = 60 +top_solid_infill_speed = 72 top_solid_layers = 4 top_solid_min_thickness = 0.6 travel_speed = 150 diff --git a/Config files/print/0.35mm @E2 0.6.ini b/Config files/print/0.35mm @E2 0.6.ini index 1b77d31..b98fe8c 100644 --- a/Config files/print/0.35mm @E2 0.6.ini +++ b/Config files/print/0.35mm @E2 0.6.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.3.0-rc2+win64 on 2020-12-27 at 18:56:01 UTC +# generated by PrusaSlicer 2.3.0+win64 on 2021-03-04 at 09:45:15 UTC avoid_crossing_perimeters = 0 avoid_crossing_perimeters_max_detour = 0 bottom_fill_pattern = monotonic @@ -6,8 +6,8 @@ bottom_solid_layers = 3 bottom_solid_min_thickness = 0.5 bridge_acceleration = 0 bridge_angle = 0 -bridge_flow_ratio = 0.95 -bridge_speed = 25 +bridge_flow_ratio = 1.4 +bridge_speed = 15 brim_width = 0 clip_multipart_objects = 1 compatible_printers = @@ -17,10 +17,10 @@ default_acceleration = 0 dont_support_bridges = 1 draft_shield = 0 elefant_foot_compensation = 0.2 -ensure_vertical_shell_thickness = 1 +ensure_vertical_shell_thickness = 0 external_perimeter_extrusion_width = 0.68 external_perimeter_speed = 35 -external_perimeters_first = 0 +external_perimeters_first = 1 extra_perimeters = 0 extruder_clearance_height = 27 extruder_clearance_radius = 52 @@ -32,7 +32,7 @@ first_layer_acceleration = 0 first_layer_extrusion_width = 0.65 first_layer_height = 0.3 first_layer_speed = 15 -gap_fill_speed = 50 +gap_fill_speed = 25 gcode_comments = 0 gcode_label_objects = 0 infill_acceleration = 0 @@ -43,7 +43,7 @@ infill_extruder = 1 infill_extrusion_width = 0.68 infill_first = 0 infill_only_where_needed = 0 -infill_overlap = 30% +infill_overlap = 0% infill_speed = 70 inherits = interface_shells = 0 @@ -54,13 +54,13 @@ ironing_speed = 15 ironing_type = top layer_height = 0.35 max_print_speed = 90 -max_volumetric_speed = 20 +max_volumetric_speed = 0 min_skirt_length = 4 notes = only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}_{total_weight}g.gcode -overhangs = 0 +overhangs = 1 perimeter_acceleration = 0 perimeter_extruder = 1 perimeter_extrusion_width = 0.68 @@ -70,7 +70,7 @@ post_process = print_settings_id = raft_layers = 0 resolution = 0 -seam_position = nearest +seam_position = aligned single_extruder_multi_material_priming = 0 skirt_distance = 2 skirt_height = 3 @@ -88,24 +88,24 @@ support_material = 0 support_material_angle = 0 support_material_auto = 1 support_material_buildplate_only = 0 -support_material_contact_distance = 0.25 +support_material_contact_distance = 0.2 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0.55 support_material_interface_contact_loops = 0 support_material_interface_extruder = 1 -support_material_interface_layers = 4 -support_material_interface_spacing = 0.2 +support_material_interface_layers = 3 +support_material_interface_spacing = 5 support_material_interface_speed = 100% support_material_pattern = rectilinear -support_material_spacing = 3 +support_material_spacing = 2.5 support_material_speed = 50 support_material_synchronize_layers = 0 support_material_threshold = 45 support_material_with_sheath = 0 -support_material_xy_spacing = 75% +support_material_xy_spacing = 50% thin_walls = 0 -threads = 12 +threads = 16 top_fill_pattern = monotonic top_infill_extrusion_width = 0.6 top_solid_infill_speed = 60 diff --git a/Config files/print/0.40mm @E2 0.6.ini b/Config files/print/0.40mm @E2 0.6.ini index 69e71e6..1e674e2 100644 --- a/Config files/print/0.40mm @E2 0.6.ini +++ b/Config files/print/0.40mm @E2 0.6.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.3.0-rc2+win64 on 2020-12-27 at 18:56:08 UTC +# generated by PrusaSlicer 2.3.0+win64 on 2021-03-04 at 09:46:06 UTC avoid_crossing_perimeters = 0 avoid_crossing_perimeters_max_detour = 0 bottom_fill_pattern = monotonic @@ -6,8 +6,8 @@ bottom_solid_layers = 3 bottom_solid_min_thickness = 0.5 bridge_acceleration = 0 bridge_angle = 0 -bridge_flow_ratio = 0.95 -bridge_speed = 25 +bridge_flow_ratio = 1.4 +bridge_speed = 15 brim_width = 0 clip_multipart_objects = 1 compatible_printers = @@ -17,10 +17,10 @@ default_acceleration = 0 dont_support_bridges = 1 draft_shield = 0 elefant_foot_compensation = 0.2 -ensure_vertical_shell_thickness = 1 +ensure_vertical_shell_thickness = 0 external_perimeter_extrusion_width = 0.68 external_perimeter_speed = 35 -external_perimeters_first = 0 +external_perimeters_first = 1 extra_perimeters = 0 extruder_clearance_height = 27 extruder_clearance_radius = 52 @@ -32,7 +32,7 @@ first_layer_acceleration = 0 first_layer_extrusion_width = 0.65 first_layer_height = 0.3 first_layer_speed = 15 -gap_fill_speed = 50 +gap_fill_speed = 25 gcode_comments = 0 gcode_label_objects = 0 infill_acceleration = 0 @@ -43,7 +43,7 @@ infill_extruder = 1 infill_extrusion_width = 0.68 infill_first = 0 infill_only_where_needed = 0 -infill_overlap = 30% +infill_overlap = 0% infill_speed = 70 inherits = interface_shells = 0 @@ -54,13 +54,13 @@ ironing_speed = 15 ironing_type = top layer_height = 0.4 max_print_speed = 90 -max_volumetric_speed = 20 +max_volumetric_speed = 0 min_skirt_length = 4 notes = only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}_{total_weight}g.gcode -overhangs = 0 +overhangs = 1 perimeter_acceleration = 0 perimeter_extruder = 1 perimeter_extrusion_width = 0.68 @@ -70,7 +70,7 @@ post_process = print_settings_id = raft_layers = 0 resolution = 0 -seam_position = nearest +seam_position = aligned single_extruder_multi_material_priming = 0 skirt_distance = 2 skirt_height = 3 @@ -88,24 +88,24 @@ support_material = 0 support_material_angle = 0 support_material_auto = 1 support_material_buildplate_only = 0 -support_material_contact_distance = 0.25 +support_material_contact_distance = 0.2 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0.55 support_material_interface_contact_loops = 0 support_material_interface_extruder = 1 -support_material_interface_layers = 4 -support_material_interface_spacing = 0.2 +support_material_interface_layers = 3 +support_material_interface_spacing = 5 support_material_interface_speed = 100% support_material_pattern = rectilinear -support_material_spacing = 3 +support_material_spacing = 2.5 support_material_speed = 50 support_material_synchronize_layers = 0 support_material_threshold = 45 -support_material_with_sheath = 0 -support_material_xy_spacing = 75% +support_material_with_sheath = 1 +support_material_xy_spacing = 50% thin_walls = 0 -threads = 12 +threads = 16 top_fill_pattern = monotonic top_infill_extrusion_width = 0.6 top_solid_infill_speed = 60