OpenWhisk is a cloud-first distributed event-based programming service. It provides a programming model to upload event handlers to a cloud service, and register the handlers to respond to various events. Learn more at https://developer.ibm.com/openwhisk or try it on IBM Bluemix OpenWhisk.
- Getting Started
- Configure datastore
- Build and deploy
- Configure your shell
- Add users
- Setup CLI
- Run sample action
- Learn concepts and commands
- License
- Issues
The following instructions were tested on Mac OS X El Capitan, Ubuntu 14.04.3 LTS and may work on Windows using Vagrant.
The following are verified to work on Ubuntu 14.04.3 LTS. You may need sudo or root access to install required software depending on your system setup.
# Install git if it is not installed
apt-get install git
# Clone openwhisk
git clone https://github.com/openwhisk/openwhisk.git
# Install all required software
(cd openwhisk/tools/ubuntu-setup && source all.sh)
Once all the required software is installed, you can proceed to configure the datastore and build OpenWhisk.
A Vagrant machine is the easiest way to run OpenWhisk on Mac or Windows PC. You can download the Vagrantfile and then follow the instructions for installing OpenWhisk on Ubuntu.
# Fetch Vagrantfile
wget https://raw.githubusercontent.com/openwhisk/openwhisk/master/tools/vagrant/Vagrantfile
# Start virtual machine
vagrant up
# Login
vagrant ssh
# Follow instructions for Ubuntu users
# When all steps are completed, logout
logout
# Reload Vagrant machine to complete setup
vagrant reload
Login to the virtual machine either using the VirtualBox terminal or with vagrant ssh. The login username is vagrant and the password is vagrant. You can proceed to configure the datastore and build OpenWhisk in your Vagrant machine.
Tip: The Vagrant file is configured to allocate a virtual machine with a recommended 4GB of RAM.
Mac users can clone, build and deploy OpenWhisk either with a Vagrant or Docker machine. The following detail how to install OpenWhisk with Vagrant using a shared filesystem so that you can develop OpenWhisk natively on the Mac but deploy it inside a virtual machine.
git clone https://github.com/openwhisk/openwhisk.git
cd openwhisk
Install Vagrant then complete the following from a terminal.
cd tools/vagrant
ENV=shared vagrant up
ENV=shared vagrant reload
Tip: If the Vagrant machine provisioning fails, you can rerun it with ENV=shared vagrant provision. Alternatively, rerun the following from inside the Vagrant virtual machine.
(cd openwhisk/tools/ubuntu-setup && source all.sh)
Tip: Optionally, if you want to use Ubuntu desktop (cd openwhisk/tools/ubuntu-setup && source ubuntu-desktop.sh)
Your virtual machine is now ready to build and run OpenWhisk. Login to the virtual machine to complete the next steps.
Before you can build and deploy OpenWhisk, you must configure a backing datastore. The system supports any self-managed CouchDB instance or Cloudant as a cloud-based database service.
If you are using your own installation of CouchDB, make a note of the host, port, username and password. Then within your openwhisk directory, copy the file template-couchdb-local.env to couchdb-local.env and edit as appropriate. Note that:
- the username must have administrative rights
- the CouchDB instance must be accessible over
https(although the certificate does not need to be valid) - make sure you do not have a
cloudant-local.envfile, as it takes precendence over the CouchDB configuration
To try out OpenWhisk without managing your own CouchDB installation, you can start a CouchDB instance in a container as part of the OpenWhisk deployment. We advise that you use this method only as a temporary measure. Please note that:
- no data will persist between two creations of the container
- you will need to run the creation script every time you
cleanorteardownthe system (see below) - you will need to initialize the datastore each time (
tools/db/createImmportalDBs.sh, see below)
# Work out of your openwhisk directory
cd /your/path/to/openwhisk
# Start a CouchDB container and create an admin account
tools/db/couchdb/start-couchdb-box.sh whisk_admin some_passw0rd
# The script above automatically creates couchdb-local.env
cat couchdb-local.env
As an alternative to a self-managed CouchDB, you may want to try Cloudant which is a cloud-based databas service. There are two ways to get a Cloudant account and configure OpenWhisk to use it. You only need to establish an account once, either through IBM Bluemix or with Cloudant directly. Once you have created a Cloudant account, make note of the account username and password. Then within your openwhisk directory, copy the file template-cloudant-local.env to cloudant-local.env and edit as appropriate.
Sign up for an account via IBM Bluemix. Bluemix offers trial accounts and its signup process is straightforward so it is not described here in detail. Using Bluemix, the most convenient way to create a Cloudant instance is via the cf command-line tool. See here for instructions on how to download and configure cf to work with your Bluemix account.
When cf is set up, issue the following commands to create a Cloudant database.
# Create a Cloudant service
cf create-service cloudantNoSQLDB Shared cloudant-for-openwhisk
# Create Cloudant service keys
cf create-service-key cloudant-for-openwhisk openwhisk
# Get Cloudant service keys
cf service-key cloudant-for-openwhisk openwhisk
Make note of the username and password so you can create the required cloudant-local.env.
As an alternative to IBM Bluemix, you may sign up for an account with Cloudant directly. Cloudant is free to try and offers a metered pricing where the first $50 of usage is free each month. The signup process is straightforward so it is not described here in detail.
The system requires certain authorization keys to install standard assets (i.e., samples) and provide guest access for running unit tests. These are called immortal keys. If you are using a persisted datastore (e.g., Cloudant), you only need to perform this operation once. If you are using an ephemeral CouchDB container, you need to run this script every time you tear down and deploy the system.
# Work out of your openwhisk directory
cd /your/path/to/openwhisk
# Initialize datastore containing authorization keys
tools/db/createImmortalDBs.sh
The script will ask you to confirm this database initialization.
About to drop and recreate database 'subjects' in this Cloudant account:
<cloudant username>
This will wipe the previous database if it exists and this is not reversible.
Respond with 'DROPIT' to continue and anything else to abort.
Are you sure?
Confirm initialization by typing DROPIT. The output should resemble the following.
subjects
curl --user ... -X DELETE https://<cloudant-username>.cloudant.com/subjects
{"error":"not_found","reason":"Database does not exist."}
curl --user ... -X PUT https://<cloudant-username>.cloudant.com/subjects
{"ok":true}
{"ok":true,"id":"_design/subjects","rev":"1-..."}
Create immortal key for guest ...
{"ok":true,"id":"guest","rev":"1-..."}
Create immortal key for whisk.system ...
{"ok":true,"id":"whisk.system","rev":"1-..."}
Once you have created and configured one of cloudant-local.env or couchdb-local.env and initialized the datastore, you are ready to build and deploy OpenWhisk. The following commands are relative to the OpenWhisk directory. If necessary, change your working directory with cd /your/path/to/openwhisk.
# Build and deploy OpenWhisk in the virtual machine
ant clean build deploy
# Optionally run the unit tests against your local deployment
ant run
Tip: If during the steps above it appears some required software (e.g. ant) is missing, run the machine provisioning again and capture the output to see if some installation step failed.
Tip: The first build will take some time as it fetches many dependencies from the Internet. The duration of this step can range from 25 minutes to an hour or more depending on your network speed. Once deployed, several Docker containers will be running in your virtual machine.
Tip: Since the first build takes some time, it is not uncommon for some step to fail if there's a network hiccup or other interruption of some kind. If this happens you may see a Build FAILED message that suggests a Docker operation timed out. You can simply try ant build again and it will mostly pick up where it left off. This should only be an issue the very first time you build -- subsequent builds do far less network activity thanks to Docker caching.
To teardown OpenWhisk and remove all Docker containers, run ant teardown. You can then redeploy the system with ant deploy. To do both at once, use ant redeploy.
The OpenWhisk command line tools are located in the openwhisk/bin folder. The instructions that follow assume /your/path/to/openwhisk/bin is in your system PATH. If you are using a Vagrant machine in a shared configuration (Mac users), the OpenWhisk command line tools are already in your path inside the virtual machine.
See the script in openwhisk/tools/ubuntu-setup/bashprofile.sh if you need help or to see how to add tab completion for the OpenWhisk CLI. Do not source or run this script if you have your own .bash_profile as it will overwrite it.
Tip: The command line tools require Python 2.7. If you are using OpenWhisk from an unsupported system, make sure you have this version of Python available.
An OpenWhisk user, also known as a subject, requires a valid authorization key.
OpenWhisk is preconfigured with a guest key located in config/keys/auth.guest.
You may use this key if you like, or use wskadmin to create a new key.
wskadmin user create <subject>
This command will create a new subject with the authorization key shown on the console once you run wskadmin. This key is required when making API calls to OpenWhisk, or when using the command line interface (CLI).
The same tool may be used to delete a subject.
wskadmin user delete <subject>
When using the CLI wsk, it is convenient to store the authorization key in a property file so that one does not have to supply the key on every command.
OpenWhisk is preconfigured with a guest key. You can use this key if you like, or use wskadmin to create a new key.
- Configuring the CLI to use the guest authorization key:
wsk property set --auth $(cat config/keys/auth.guest)
- Or to create a new user and set the authorization key:
wsk property set --auth $(wskadmin user create <subject>)
Tip: The wsk CLI offers tab completion on commands and parameters. Hit tab to complete a command or to see available commands and arguments for a given context.
Tip: You can use tab completion outside the virtual machine as well since the wsk CLI is available on the host as well. Install argcomplete with sudo pip install argcomplete and add this to your Bash profile
eval "$(register-python-argcomplete wsk)".
You are now ready to run your first action. Try the "echo" action. It returns its input as the result of the action.
wsk action invoke /whisk.system/samples/echo -p message hello --blocking --result
should produce the following output:
{
"message": "hello"
}
If you cloned OpenWhisk natively onto a Mac and using a Vagrant machine to host an OpenWhisk deployment, then you can use the CLI from the host machine as well as from inside the virtual machine.
By default, the virtual machine IP address is 192.168.33.13 (see Vagrant file). From your host, configure wsk to use your Vagrant-hosted OpenWhisk deployment and run the "echo" action again to test.
wsk property set --apihost 192.168.33.13 --auth <auth key>
wsk action invoke /whisk.system/samples/echo -p message hello --blocking --result
{
"message": "hello"
}
OpenWhisk includes a self-signed SSL certificate and the wsk CLI allows untrusted certificates.
ls config/keys/openwhisk-self-*
config/keys/openwhisk-self-cert.pem
config/keys/openwhisk-self-key.pem
These are configured in config/localEnv.sh
#
# SSL certificate used by router
#
WHISK_SSL_CERTIFICATE=config/keys/openwhisk-self-cert.pem
WHISK_SSL_KEY=config/keys/openwhisk-self-key.pem
WHISK_SSL_CHALLENGE=openwhisk
Do not use these certificates in production: add your own and modify the configuration to use trusted certificates instead
Browse the documentation to learn more. Here are some topics you may be interested in:
- System overview
- Create and invoke actions
- Create triggers and rules
- Use and create packages
- Browse and use the catalog
Copyright 2015-2016 IBM Corporation
Licensed under the Apache License, Version 2.0 (the "License").
Unless required by applicable law or agreed to in writing, software distributed under the license is distributed on an "as is" basis, without warranties or conditions of any kind, either express or implied. See the license for the specific language governing permissions and limitations under the license.
Report bugs, ask questions and request features here on GitHub.