diff --git a/dilemma_build_guide/v2.md b/dilemma_build_guide/v2.md
index 157d80a..9e3a8cf 100644
--- a/dilemma_build_guide/v2.md
+++ b/dilemma_build_guide/v2.md
@@ -12,7 +12,15 @@ parent: Dilemma Build guides
 
 # Install the per-key RGB
 
--   If you have per-key RGB in your kit, install those first.-   Make sure that the Gnd pad aligns ! -   The Gnd pad of the Led is the one with the cutout (top right pin on the picture)-   The Gnd pad on the PCB is the one with the cutout, and white circle (top right on the picture)
+If you ordered a kit with per-key RGB, we will start by installing those. The LEDs are sensitive to heat and need to be installed in a specific way, so make sure to read the instructions below first.
+
+-   Make sure to never stay on the same pad for more than 4 seconds with your soldering iron ! You might risk damaging the pad
+-   If a pad doesn't want to be soldered, let it cool down for 30 seconds and then try again
+
+-   The Gnd pad of the Led is the one with the cutout (top right pin on the picture)
+-   The Gnd pad on the PCB is the one with the cutout, and white circle (top right on the picture)
+
+Install all the LEDs.
 
 ![](../assets/pics/guides/dilemmav2/1.jpg)
 
diff --git a/todo.md b/todo.md
new file mode 100644
index 0000000..c144201
--- /dev/null
+++ b/todo.md
@@ -0,0 +1 @@
+dilemma v2: revamp rgb part, like charybdis
\ No newline at end of file