Added RCEMIPII plane sst

Surface condition dispatches on sfc_temp and model_config

Added buildkite test

add diagnostic variable

remove model_config

.buildkite/pipeline.yml

@@ -158,6 +158,14 @@ steps:
           --job_id box_density_current_test
         artifact_paths: "box_density_current_test/output_active/*"
 
+      - label: ":computer: Box (ρe_tot) rcemipii with diagnostic edmf"
+        command: >
+          julia --color=yes --project=examples examples/hybrid/driver.jl
+          --config_file $CONFIG_PATH/rcemipii_box_diagnostic_edmfx.yml
+          --job_id rcemipii_box_diagnostic_edmfx
+        artifact_paths: "rcemipii_box_diagnostic_edmfx/output_active/*"
+        soft_fail: true
+
   - group: "Plane Examples"
     steps:
       - label: ":computer: Agnesi linear hydrostatic mountain experiment (uniform)"

config/default_configs/default_config.yml

@@ -176,7 +176,7 @@ surface_setup:
   help: "Surface flux scheme [`DefaultExchangeCoefficients` (default), `DefaultMoninObukhov`]"
   value: "DefaultExchangeCoefficients"
 surface_temperature:
-  help: "Prescribed surface temperature functional form ['ZonallySymmetric' (default), 'ZonallyAsymmetric']"
+  help: "Prescribed surface temperature functional form ['ZonallySymmetric' (default), 'ZonallyAsymmetric', 'RCEMIPII']"
   value: "ZonallySymmetric"
 initial_condition:
   help: "Initial condition [`DryBaroclinicWave`, `MoistBaroclinicWave`, `DecayingProfile`, `IsothermalProfile`, `Bomex`, `DryDensityCurrentProfile`, `AgnesiHProfile`, `ScharProfile`, `RisingThermalBubbleProfile`]"

config/model_configs/rcemipii_box_diagnostic_edmfx.yml

@@ -0,0 +1,30 @@
+surface_setup: DefaultMoninObukhov
+surface_temperature: RCEMIPII
+insolation: rcemipii
+config: box
+rad: allskywithclear
+turbconv: diagnostic_edmfx
+implicit_diffusion: true
+approximate_linear_solve_iters: 2
+prognostic_tke: true
+edmfx_upwinding: first_order
+edmfx_entr_model: "Generalized"
+edmfx_detr_model: "Generalized"
+edmfx_nh_pressure: true
+edmfx_sgs_mass_flux: true
+edmfx_sgs_diffusive_flux: true
+moist: equil
+precip_model: 0M
+override_τ_precip: false
+dt: 30secs
+t_end: 3600secs
+dt_save_state_to_disk: 12hours
+toml: [toml/diagnostic_edmfx_0M.toml]
+netcdf_interpolation_num_points: [8, 8, 60]
+netcdf_output_at_levels: true
+diagnostics:
+  - short_name: [ts, ta, thetaa, ha, pfull, rhoa, ua, va, wa, hur, hus, cl, clw, cli, hussfc, evspsbl, pr]
+    period: 5mins
+  - short_name: [arup, waup, taup, thetaaup, haup, husup, hurup, clwup, cliup, waen, tke, lmix]
+    period: 5mins
+ode_algo: ARS343

config/model_configs/rcemipii_sphere_diagnostic_edmfx.yml

@@ -1,5 +1,5 @@
 surface_setup: DefaultMoninObukhov
-surface_temperature: RCEMIPIISphere
+surface_temperature: RCEMIPII
 rad: allskywithclear
 turbconv: diagnostic_edmfx
 implicit_diffusion: true

post_processing/ci_plots.jl

@@ -1080,6 +1080,7 @@ EDMFBoxPlots = Union{
     Val{:prognostic_edmfx_simpleplume_column},
     Val{:prognostic_edmfx_gcmdriven_column},
     Val{:prognostic_edmfx_bomex_box},
+    Val{:rcemipii_box_diagnostic_edmfx},
 }
 
 EDMFBoxPlotsWithPrecip = Union{
@@ -1204,7 +1205,9 @@ function make_plots(
         short_name = short_names[1],
         reduction,
     )
-    if "10m" in available_periods
+    if "5m" in available_periods
+        period = "5m"
+    elseif "10m" in available_periods
         period = "10m"
     elseif "30m" in available_periods
         period = "30m"

src/solver/model_getters.jl

@@ -37,13 +37,13 @@ end
 function get_sfc_temperature_form(parsed_args)
     surface_temperature = parsed_args["surface_temperature"]
     @assert surface_temperature in
-            ("ZonallyAsymmetric", "ZonallySymmetric", "RCEMIPIISphere")
+            ("ZonallyAsymmetric", "ZonallySymmetric", "RCEMIPII")
     return if surface_temperature == "ZonallyAsymmetric"
         ZonallyAsymmetricSST()
     elseif surface_temperature == "ZonallySymmetric"
         ZonallySymmetricSST()
-    elseif surface_temperature == "RCEMIPIISphere"
-        RCEMIPIISphereSST()
+    elseif surface_temperature == "RCEMIPII"
+        RCEMIPIISST()
     end
 end
 

src/solver/types.jl

@@ -26,7 +26,7 @@ struct PlaneModel <: AbstractModelConfig end
 abstract type AbstractSST end
 struct ZonallySymmetricSST <: AbstractSST end
 struct ZonallyAsymmetricSST <: AbstractSST end
-struct RCEMIPIISphereSST <: AbstractSST end
+struct RCEMIPIISST <: AbstractSST end
 
 abstract type AbstractInsolation end
 struct IdealizedInsolation <: AbstractInsolation end

src/surface_conditions/SurfaceConditions.jl

@@ -5,7 +5,7 @@ import ..Parameters as CAP
 import ..DryModel
 import ..ZonallyAsymmetricSST
 import ..ZonallySymmetricSST
-import ..RCEMIPIISphereSST
+import ..RCEMIPIISST
 import ..PrognosticSurfaceTemperature
 import ..PrescribedSurfaceTemperature
 import ..gcm_driven_timeseries

src/surface_conditions/surface_conditions.jl

@@ -168,14 +168,8 @@ function surface_state_to_conditions(
         error("surface q_vap cannot be specified when using a DryModel")
 
     T = if isnothing(sfc_prognostic_temp)
-        if isnothing(surf_state.T) && (
-            coordinates isa Geometry.LatLongZPoint ||
-            coordinates isa Geometry.LatLongPoint
-        )
+        if isnothing(surf_state.T)
             surface_temperature(atmos.sfc_temperature, coordinates)
-        elseif isnothing(surf_state.T)
-            # Assume that the latitude is 0.
-            FT(300)
         else
             surf_state.T
         end
@@ -335,21 +329,51 @@ function surface_state_to_conditions(
 end
 
 #Sphere SST distribution from Wing et al. (2023) https://gmd.copernicus.org/preprints/gmd-2023-235/
-function surface_temperature(::RCEMIPIISphereSST, coordinates)
+function surface_temperature(
+    ::RCEMIPIISST,
+    coordinates::Union{Geometry.LatLongZPoint, Geometry.LatLongPoint},
+)
     (; lat) = coordinates
     FT = eltype(lat)
     T = FT(300) + FT(1.25) / 2 * cosd(360 * lat / 54)
     return T
 end
 
-function surface_temperature(::ZonallySymmetricSST, coordinates)
+#Plane SST distribution from Wing et al. (2023) https://gmd.copernicus.org/preprints/gmd-2023-235/
+function surface_temperature(
+    ::RCEMIPIISST,
+    coordinates::Union{Geometry.XYPoint, Geometry.XYZPoint},
+)
+    (; x) = coordinates
+    FT = eltype(x)
+    T = FT(300) + FT(1.25) / 2 * cos(2 * FT(pi) * x / 6000)
+    return T
+end
+
+#For non-RCEMIPII box models with prescribed surface temp, assume that the latitude is 0.
+function surface_temperature(
+    ::Union{ZonallySymmetricSST, ZonallyAsymmetricSST},
+    coordinates::Union{Geometry.XYPoint, Geometry.XYZPoint},
+)
+    (; x) = coordinates
+    FT = eltype(x)
+    return FT(300)
+end
+
+function surface_temperature(
+    ::ZonallySymmetricSST,
+    coordinates::Geometry.LatLongZPoint,
+)
     (; lat, z) = coordinates
     FT = eltype(lat)
     T = FT(271) + FT(29) * exp(-coordinates.lat^2 / (2 * 26^2)) - FT(6.5e-3) * z
     return T
 end
 
-function surface_temperature(::ZonallyAsymmetricSST, coordinates)
+function surface_temperature(
+    ::ZonallyAsymmetricSST,
+    coordinates::Geometry.LatLongZPoint,
+)
     (; lat, long, z) = coordinates
     FT = eltype(lat)
     #Assume a surface temperature that varies with both longitude and latitude, Neale and Hoskins, 2021