You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Upon being plugged in, or upon starting my window manager, my Huion H610 PRO V2 tablet works as expected only for an indeterminate amount of time, ranging from under five seconds to nearly ten minutes. This happens regardless of whether X11 is running.
Whenever the tablet stops working, it still appears to be connected in kernel logs, lshw, ls /dev/input/event* and xinput list. The green LED on the tablet continues to work as normal, lighting up when the pen is close to the pad or if a button is being pressed. The only way to reset the tablet is to physically disconnect and reconnect the tablet.
I’m using the mainline hid_uclogic kernel module as of 6.1.5, and, when using X11, xf86-input-wacom.
Following are evtest and kernel logs from one instance in which all I did was reconnect it and press the Undo button (Button 1 on the pad) twice before it stopped working:
smp@sakura:~ # sudo evtest /dev/input/event26Input driver version is 1.0.1Input device ID: bus 0x3 vendor 0x256c product 0x6d version 0x111Input device name: "HUION Huion Tablet Pad"Supported events: Event type 0 (EV_SYN) Event type 1 (EV_KEY) Event code 256 (BTN_0) Event code 257 (BTN_1) Event code 258 (BTN_2) Event code 259 (BTN_3) Event code 260 (BTN_4) Event code 261 (BTN_5) Event code 262 (BTN_6) Event code 263 (BTN_7) Event code 264 (BTN_8) Event code 265 (BTN_9) Event code 304 (BTN_SOUTH) Event code 305 (BTN_EAST) Event code 306 (BTN_C) Event code 331 (BTN_STYLUS) Event type 3 (EV_ABS) Event code 0 (ABS_X) Value 0 Min 0 Max 1 Event code 1 (ABS_Y) Value 0 Min 0 Max 1 Event type 4 (EV_MSC) Event code 4 (MSC_SCAN)Properties:Testing ... (interrupt to exit)Event: time 1674753754.558298, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90001Event: time 1674753754.558298, type 1 (EV_KEY), code 256 (BTN_0), value 1Event: time 1674753754.558298, -------------- SYN_REPORT ------------Event: time 1674753754.684219, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90001Event: time 1674753754.684219, type 1 (EV_KEY), code 256 (BTN_0), value 0Event: time 1674753754.684219, -------------- SYN_REPORT ------------
smp@sakura:~ # sudo tail -f -n 0 /var/log/syslogJan 26 12:22:31 sakura kernel: usb 3-2: new full-speed USB device number 25 using xhci_hcdJan 26 12:22:31 sakura kernel: usb 3-2: New USB device found, idVendor=256c, idProduct=006d, bcdDevice= 1.00Jan 26 12:22:31 sakura kernel: usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3Jan 26 12:22:31 sakura kernel: usb 3-2: Product: Huion TabletJan 26 12:22:31 sakura kernel: usb 3-2: Manufacturer: HUIONJan 26 12:22:31 sakura kernel: input: HUION Huion Tablet Pen as /devices/pci0000:00/0000:00:01.3/0000:03:00.2/0000:20:08.0/0000:26:00.0/usb3/3-2/3-2:1.0/0003:256C:006D.0034/input/input137Jan 26 12:22:31 sakura kernel: input: HUION Huion Tablet Pad as /devices/pci0000:00/0000:00:01.3/0000:03:00.2/0000:20:08.0/0000:26:00.0/usb3/3-2/3-2:1.0/0003:256C:006D.0034/input/input138Jan 26 12:22:31 sakura kernel: input: HUION Huion Tablet Touch Strip as /devices/pci0000:00/0000:00:01.3/0000:03:00.2/0000:20:08.0/0000:26:00.0/usb3/3-2/3-2:1.0/0003:256C:006D.0034/input/input139Jan 26 12:22:31 sakura kernel: input: HUION Huion Tablet Dial as /devices/pci0000:00/0000:00:01.3/0000:03:00.2/0000:20:08.0/0000:26:00.0/usb3/3-2/3-2:1.0/0003:256C:006D.0034/input/input140Jan 26 12:22:31 sakura kernel: uclogic 0003:256C:006D.0034: input,hiddev97,hidraw6: USB HID v1.11 Keypad [HUION Huion Tablet] on usb-0000:26:00.0-2/input0Jan 26 12:22:31 sakura kernel: uclogic 0003:256C:006D.0035: No inputs registered, leavingJan 26 12:22:31 sakura kernel: uclogic 0003:256C:006D.0035: hidraw7: USB HID v1.11 Device [HUION Huion Tablet] on usb-0000:26:00.0-2/input1
The text was updated successfully, but these errors were encountered:
Upon being plugged in, or upon starting my window manager, my Huion H610 PRO V2 tablet works as expected only for an indeterminate amount of time, ranging from under five seconds to nearly ten minutes. This happens regardless of whether X11 is running.
Whenever the tablet stops working, it still appears to be connected in kernel logs,
lshw
,ls /dev/input/event*
andxinput list
. The green LED on the tablet continues to work as normal, lighting up when the pen is close to the pad or if a button is being pressed. The only way to reset the tablet is to physically disconnect and reconnect the tablet.I’m using the mainline
hid_uclogic
kernel module as of 6.1.5, and, when using X11, xf86-input-wacom.Following are evtest and kernel logs from one instance in which all I did was reconnect it and press the Undo button (Button 1 on the pad) twice before it stopped working:
The text was updated successfully, but these errors were encountered: