Skip to content

Latest commit

 

History

History
63 lines (54 loc) · 2.24 KB

README.md

File metadata and controls

63 lines (54 loc) · 2.24 KB
Raw

MangoPI MQ-Quad board (Allwinner H616 chip)

Direction for use

  • Modify the board/mangopi/mq-quad/rootfs/etc/wpa_supplicant/wpa_supplicant-wlan0.conf file, Set the WiFi ssid and password
  • Using systemctrl start wpa_supplicant@wlan0 command to connect Wifi
  • Using systemctrl enable wpa_supplicant@wlan0 Automatic startup connection
  • After powering on the board, you can connect to the console through the analog serial port of the OTG typec port
  • Or connect HDMI and keyboard for console interaction.

Peripheral support

Peripheral Describe
RTL8723DS WiFi/BT
USB Host 1 typec host with2 usb host in misc port
USB OTG 1 typec otg
ethernet ethernet for mac1 with ephy in misc port
UART uart1 with uart2
Mini HDMI hdmi with audio
I2C i2c1 with i2c2
Nor Flash spi0 nor flash
SPI spi1dev drivers
GPU gpu(panforst)

Build

# Using mangopi_mq_quad_defconfig
make mangopi_mq_quad_defconfig

# Start compiling the tf card image
make

Test method

  • Bluetooth Test
bluetoothctl                # Open bluetooth console
[bluetooth]# power on       # Open bluetooth power
[bluetooth]# scan on        # Start scanning peripheral devices
[bluetooth]# devices        # Lists the scanned peripherals
[bluetooth]# exit           # Exit bluetooth console
  • HDMI Audio test
# Configure HDMI audio
amixer -c 1 set 'I2S1 Src Select' 'APBIF_TXDIF0'
amixer -c 1 set 'I2S1OUT' on

# The -D hw:2,0 command must be run first, before you can use audio normally. (You only need to do this once per startup)
aplay test.wav -D hw:2,0

# Play music
aplay test.wav -D hw:1,0
  • GPU Test
# Perform the following command on the terminal to start scoring (Insert the HDMI screen first)
glmark2-es2-drm

# Test images can be seen on HDMI while running

Reference

https://github.com/open-cores/mangguo-h616-armbian