We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
There were many data loggers used at swiss camp to record data from the 10 m tower. This issue tries to document how different files are merged.
In reverse chronological order, the most recent data comes from CR1000 installed in 2014 8blue data in the first plot below.
Before that, and starting in 1999, a number of CR10X files are available (see plot below). The data is homogeneous and logged hourly.
Before 1999, it was a mix of CR27 and CR27X:
Variables were separated in different with temporal resolution varying from 10 min (radiation data) to 3h (temperature and pressure in winter mode).
The text was updated successfully, but these errors were encountered:
No branches or pull requests
There were many data loggers used at swiss camp to record data from the 10 m tower.
This issue tries to document how different files are merged.
In reverse chronological order, the most recent data comes from CR1000 installed in 2014 8blue data in the first plot below.
Before that, and starting in 1999, a number of CR10X files are available (see plot below).
The data is homogeneous and logged hourly.
Before 1999, it was a mix of CR27 and CR27X:
Variables were separated in different with temporal resolution varying from 10 min (radiation data) to 3h (temperature and pressure in winter mode).
The text was updated successfully, but these errors were encountered: