diff --git a/tools/psoc6/mpy-psoc6.cmd b/tools/psoc6/mpy-psoc6.cmd
new file mode 100644
index 0000000000000..4a12294286938
--- /dev/null
+++ b/tools/psoc6/mpy-psoc6.cmd
@@ -0,0 +1,229 @@
+@echo off
+setlocal
+
+if "%1"=="quick-start" goto cmd_quick_start
+if "%1"=="device-setup" goto cmd_device_setup
+if "%1"=="firmware-deploy" goto cmd_firmware_deploy
+if "%1"=="help" goto help
+
+goto help
+
+exit /b %ERRORLEVEL%
+
+:cmd_quick_start
+    call :mpy_quick_start %2 %3
+exit /b 0
+
+:cmd_device_setup
+    call :mpy_device_setup %2 %3 %4
+exit /b 0
+
+:cmd_firmware_deploy
+    call :mpy_firmware_deploy %2 %3
+exit /b 0
+
+
+rem ~~~~~~~~~~~~~~~~
+rem Script functions
+rem ~~~~~~~~~~~~~~~~
+
+:help
+
+    echo Micropython PSoC6 utility script
+    echo usage: mpy-psoc6.cmd ^<command^> 
+    echo The available commands are:
+    echo: 
+    echo   quick-start          Setup of MicroPython IDE and PSoC6 board.
+    echo                        Use this command for a guided installation and 
+    echo                        quick start using MicroPython PSoC6. 
+    echo                        usage: mpy-psoc6.cmd quick-start [board [version]]
+    echo:
+    echo                        board       PSoC6 prototyping kit name
+    echo                        version     MicroPython PSoC6 firmware version
+    echo:
+    echo   device-setup         Setup of MicroPython PSoC6 board.
+    echo                        Use this command to install the deployment tools 
+    echo                        and MicroPython firmware binary, and deploy the
+    echo                        firmware on the PSoC6 device.
+    echo                        usage: mpy-psoc6.cmd device-setup [board [[version [\q]]]
+    echo:
+    echo                        board       PSoC6 prototyping kit name
+    echo                        version     MicroPython PSoC6 firmware version
+    echo                        \q          Quiet. Do not prompt any user confirmation request
+    echo:
+    echo   firmware-deploy      Firmware deployment on MicroPython board.
+    echo                        Use this command to deploy an existing .hex file 
+    echo                        on a PSoC6 board.
+    echo                        Requires openocd available on the system path.
+    echo                        usage: mpy-psoc6.cmd firmware-deploy ^<board^> ^<hex_file^>
+    echo:
+    echo                        board       PSoC6 prototyping kit name
+    echo                        hex_file    MicroPython PSoC6 firmware .hex file
+    echo:
+
+exit /b 0
+
+:mpy_firmware_deploy
+
+    Rem Board is yet unused. In future the suitable target .cfg selection needs to be based on the board.
+    set board=%~1
+    set hex_file=%~2
+
+    echo Deploying Micropython...
+    openocd.exe -s openocd\scripts -c "source [find interface/kitprog3.cfg]; ; source [find target/psoc6_2m.cfg]; psoc6 allow_efuse_program off; psoc6 sflash_restrictions 1; program %hex_file% verify reset exit;"
+
+exit /b 0
+
+:mpy_firmware_download:
+
+    set board=%~1
+    set version=%~2
+
+    if "%version%" == "latest" (
+        call set sub_url=latest/download
+    ) else (
+        call set sub_url=download/%version%
+    )
+
+    echo Downloading MicroPython PSoC6 port %version% for %board% board...
+    curl.exe -s -L https://github.com/jaenrig-ifx/micropython/releases/%sub_url%/mpy-psoc6_%board%.hex > mpy-psoc6_%board%.hex
+
+exit /b 0
+
+:mpy_firmware_clean
+
+    set board=%~1
+    echo Cleaning up micropython hex files...
+    del mpy-psoc6_%board%.hex
+
+exit /b 0
+
+:openocd_download_install
+
+    echo Downloading openocd...
+    curl.exe -s -L https://github.com/Infineon/openocd/releases/download/release-v4.4.0/openocd-4.4.0.2134-windows.zip > openocd.zip
+    echo Extracting openocd...
+    powershell -command "Expand-Archive -Force 'openocd.zip' -DestinationPath '.'"
+    set PATH=openocd\bin;%PATH%
+
+exit /b 0
+
+:openocd_uninstall_clean
+
+    echo Cleaning up openOCD installation package...
+    del openocd.zip 
+    rmdir /s /q openocd
+
+exit /b 0
+
+:mpy_device_setup
+
+    setlocal enabledelayedexpansion
+
+    Rem Board selection
+    set board=%~1
+    set board_list[0]=CY8CPROTO-062-4343W
+    if [%board%]==[] (
+        echo:
+        echo       Supported MicroPython PSoC6 boards
+        echo +---------+-----------------------------------+
+        echo ^|   ID    ^|              Board                ^|
+        echo +---------+-----------------------------------+
+        echo ^|   0     ^|  CY8CPROTO-062-4343W (default^)    ^|
+        echo +---------+-----------------------------------+
+        echo:
+        echo No user selection required. Only one choice.
+        set /a board_index=0
+        echo:
+        Rem set  /p/( "board_index=Please type the desired board ID. " --> Uncomment and remove preselection above when more options are available
+        call set board=%%board_list[!board_index!]%%
+    )
+    echo MicroPython PSoC6 Board  :: %board%
+
+    Rem Version selection
+    set mpy_firmware_version=%~2
+    if [%mpy_firmware_version%]==[] set mpy_firmware_version=latest
+    echo MicroPython PSoC6 Version :: %mpy_firmware_version% 
+    echo:
+
+    Rem Download flashing tool and firmware
+    call :openocd_download_install
+    call :mpy_firmware_download %board% %mpy_firmware_version%
+
+    if not [%~3]==[\q] (
+        echo:
+        echo Please CONNECT THE BOARD and PRESS ANY KEY to start the firmware deployment...
+        pause >nul
+        echo:
+    )
+
+    Rem Deploy on board
+    call :mpy_firmware_deploy %board% mpy-psoc6_%board%.hex
+    echo Device firmware deployment completed.   
+
+    call :openocd_uninstall_clean
+    call :mpy_firmware_clean %board%
+
+    if not [%~3]==[\q] (
+        echo:
+        echo Press any key to continue...
+        pause >nul
+        echo:
+    )
+
+exit /b 0
+
+:arduino_lab_download_and_launch
+
+    echo Downloading Arduino Lab for Micropython...
+    curl.exe -s -L https://github.com/arduino/lab-micropython-editor/releases/download/0.5.0-alpha/Arduino.Lab.for.Micropython-win_x64.zip > arduino-for-micropython.zip
+    echo Extracting Arduino Lab for Micropython...
+    mkdir arduino-lab-mpy
+	powershell -command "Expand-Archive -Force 'arduino-for-micropython.zip' -DestinationPath 'arduino-lab-mpy'"
+    cd arduino-lab-mpy
+    echo Launching Arduino Lab for Micropython...
+    start "" "Arduino Lab for Micropython"
+    cd ..
+
+exit /b 0
+
+:arduino_lab_install_package_clean
+
+    echo Cleaning up Arduino Lab for Micropython installation package...
+    del arduino-for-micropython.zip
+
+exit /b 0
+
+:mpy_quick_start
+
+    setlocal enabledelayedexpansion
+
+    echo ################################################
+    echo                 Welcome to the 
+    echo  __  __ _            ___      _   _             
+    echo ^|  \/  (_)__ _ _ ___^| _ \_  _^| ^|_^| ^|_  ___ _ _ 
+    echo ^| ^|\/^| ^| / _^| '_/ _ \  _/ ^|^| ^|  _^| ' \/ _ \ ' \ 
+    echo ^|_^|_ ^|_^|_\__^|_^| \___/_^|  \_, ^|\__^|_^|^|_\___/_^|^|_^|
+    echo ^| _ \/ __^| ___ / __^|/ /  ^|__/                    
+    echo ^|  _/\__ \/ _ \ (__/ _ \                         
+    echo ^|_^|  ^|___/\___/\___\___/ 
+    echo:
+    echo                  Quick Start
+    echo ################################################
+
+    call :mpy_device_setup %~1 %~2
+
+    call :arduino_lab_download_and_launch
+
+    call :arduino_lab_install_package_clean
+
+    echo:   
+    echo ################################################
+    echo    The installation is completed. Have fun :)                 
+    echo ################################################  
+
+    echo:
+    echo Press any key to exit...
+    pause >nul
+
+exit /b 0
diff --git a/tools/psoc6/mpy-psoc6.sh b/tools/psoc6/mpy-psoc6.sh
new file mode 100755
index 0000000000000..494c43b54c06d
--- /dev/null
+++ b/tools/psoc6/mpy-psoc6.sh
@@ -0,0 +1,230 @@
+#!/bin/bash
+
+###################
+# Script Functions
+###################
+
+function help {
+
+    echo 'Micropython PSoC6 utility script' 
+    echo 'usage: sh mpy-psoc6.sh <command>' 
+    echo 'The available commands are:'
+    echo ''
+    echo '  quick-start          Setup of MicroPython IDE and PSoC6 board.'
+    echo '                       Use this command for a guided installation and' 
+    echo '                       quick start using MicroPython PSoC6.' 
+    echo '                       usage: sh mpy-psoc6.sh quick-start [board [version]]'
+    echo ''
+    echo '                       board       PSoC6 prototyping kit name'
+    echo '                       version     MicroPython PSoC6 firmware version'
+    echo ''
+    echo '  device-setup         Setup of MicroPython PSoC6 board.'
+    echo '                       Use this command to install the deployment tools'
+    echo '                       and MicroPython firmware binary, and deploy the'
+    echo '                       firmware on the PSoC6 device.'
+    echo '                       usage: sh mpy-psoc6.sh device-setup [board [[version [\q]]]'
+    echo ''
+    echo '                       board       PSoC6 prototyping kit name'
+    echo '                       version     MicroPython PSoC6 firmware version'
+    echo '                       \q          Quiet. Do not prompt any user confirmation request'
+    echo ''
+    echo '  firmware-deploy      Firmware deployment on MicroPython board.'
+    echo '                       Use this command to deploy an existing .hex file'
+    echo '                       on a PSoC6 board.'
+    echo '                       Requires openocd available on the system path.'
+    echo '                       usage: sh mpy-psoc6.sh firmware-deploy <board> <hex_file>'
+    echo ''
+    echo '                       board       PSoC6 prototyping kit name'
+    echo '                       hex_file    MicroPython PSoC6 firmware .hex file'
+
+}
+
+function mpy_firmware_deploy {
+    
+    board=$1
+    hex_file=$2
+
+    echo Deploying Micropython...
+    openocd -s openocd\scripts -c "source [find interface/kitprog3.cfg]; ; source [find target/psoc6_2m.cfg]; psoc6 allow_efuse_program off; psoc6 sflash_restrictions 1; program ${hex_file} verify reset exit;"
+
+}
+
+function mpy_firmware_download {
+
+    board=$1
+    version=$2
+
+    echo Downloading MicroPython PSoC6 port ${version} for ${board} board...
+    if [ "$version" = "latest" ]; then 
+        sub_url="latest/download"
+    else
+        sub_url="download/${version}"
+    fi
+    curl -s -L https://github.com/jaenrig-ifx/micropython/releases/${sub_url}/mpy-psoc6_${board}.hex > mpy-psoc6_${board}.hex
+   
+}
+
+function mpy_firmware_clean {
+
+    board=$1
+
+    echo Cleaning up micropython hex files...
+    rm mpy-psoc6_${board}.hex
+
+}
+
+function openocd_download_install {
+
+    echo Downloading openocd...
+    curl -s -L https://github.com/Infineon/openocd/releases/download/release-v4.4.0/openocd-4.4.0.2134-linux.tar.gz > openocd.tar.gz
+    echo Extracting openocd...
+    tar -xf openocd.tar.gz
+    export PATH=${PWD}/openocd/bin:$PATH
+    ./openocd/udev_rules/install_rules.sh
+
+}
+
+function openocd_uninstall_clean {
+
+    echo Cleaning up openOCD installation package...
+    rm openocd.tar.gz
+    rm -rf openocd
+
+}
+
+function mpy_device_setup {
+
+    board=$1
+    board_list=(CY8CPROTO-062-4343W)
+
+    if [ "$board" = "" ]; then
+        echo ''
+        echo '      Supported MicroPython PSoC6 boards      '
+        echo '+---------+-----------------------------------+'
+        echo '|   ID    |              Board                |'
+        echo '+---------+-----------------------------------+'
+        echo '|   0     |  CY8CPROTO-062-4343W (default)    |'
+        echo '+---------+-----------------------------------+'
+        echo ''
+        echo 'No user selection required. Only one choice.'
+        
+        board_index=0
+        echo ''
+
+        # Uncomment and remove preselection above when more options are available
+        # echo Please type the desired board ID. 
+        # read board_index
+
+        board=${board_list[${board_index}]}
+    fi  
+    
+    echo MicroPython PSoC6 Board  :: ${board}
+
+    # Version selection
+    mpy_firmware_version=$2
+
+    if [  "$mpy_firmware_version" = "" ]; then 
+        mpy_firmware_version=latest
+    fi
+
+    echo MicroPython PSoC6 Version :: ${mpy_firmware_version}
+    echo ''
+
+    # Download flashing tool and firmware
+    openocd_download_install
+    mpy_firmware_download ${board} ${mpy_firmware_version}
+
+    if [ "$3" != "\q" ]; then
+        echo ''
+        echo Please CONNECT THE BOARD and PRESS ANY KEY to start the firmware deployment...
+        read user_input
+        echo ''
+    fi
+
+    # Deploy on board
+    mpy_firmware_deploy ${board} mpy-psoc6_${board}.hex
+    echo Device firmware deployment completed.   
+
+    openocd_uninstall_clean
+    mpy_firmware_clean ${board}
+
+    if [ "$3" != "\q" ]; then
+        echo ''
+        echo Press any key to continue...
+        read user_input
+        echo ''
+    fi
+}
+
+function arduino_lab_download_and_launch {
+
+    echo Downloading Arduino Lab for Micropython...
+    curl -s -L https://github.com/arduino/lab-micropython-editor/releases/download/0.5.0-alpha/Arduino.Lab.for.Micropython-linux_x64.zip > arduino-for-micropython.zip
+    echo Extracting Arduino Lab for Micropython...
+    mkdir arduino-lab-mpy
+    unzip arduino-for-micropython.zip -d arduino-lab-mpy
+    cd arduino-lab-mpy
+    echo Launching Arduino Lab for Micropython...
+    ./arduino-lab-micropython-ide
+    cd ..
+
+}
+
+function arduino_lab_install_package_clean {
+
+    echo Cleaning up Arduino Lab for Micropython installation package...
+    rm arduino-for-micropython.zip
+
+}
+
+function mpy_quick_start {
+
+    echo '################################################'
+    echo '                Welcome to the                  '
+    echo ' __  __ _            ___      _   _             '
+    echo '|  \/  (_)__ _ _ ___| _ \_  _| |_| |_  ___ _ _'
+    echo "| |\/| | / _| '_/ _ \  _/ || |  _| ' \/ _ \ ' \\"
+    echo '|_|_ |_|_\__|_| \___/_|  \_, |\__|_||_\___/_||_|'
+    echo '| _ \/ __| ___ / __|/ /  |__/'                    
+    echo '|  _/\__ \/ _ \ (__/ _ \'                        
+    echo '|_|  |___/\___/\___\___/' 
+    echo ''
+    echo '                 Quick Start                    '
+    echo '################################################'
+
+    mpy_device_setup $1 $2
+
+    arduino_lab_download_and_launch
+
+    arduino_lab_install_package_clean
+
+    echo '################################################'
+    echo '   The installation is completed. Have fun :)   '                 
+    echo '################################################'
+
+    echo ''
+    echo Press any key to exit...
+    read user_input
+    echo ''
+
+}
+
+# Main script commands
+
+case $1 in
+   "quick-start")
+        mpy_quick_start $2 $3
+        ;;
+    "device-setup")
+        mpy_device_setup $2 $3 $4
+        ;;
+   "firmware-deploy")
+        mpy_firmware_deploy $2 $3
+        ;;
+   "help")
+        help
+        ;;
+   *)
+        help
+        ;;
+esac