docs/psoc6/quickref.rst: Updated i2s quickref section.

Signed-off-by: enriquezgarc <enriquezgarcia.external@infineon.com>

docs/psoc6/quickref.rst

@@ -669,33 +669,22 @@ I2S bus
 
 See :ref:`machine.I2S <machine.I2S>`. 
 
-PSoC6 implements additional method which is explained below.
+Supported sample rates are 8KHz, 16KHz, 32KHz, 48KHz, 22.05KHz, 44.1KHz.
 
-Methods
-^^^^^^^
- .. method:: I2S.stop() 
-
- This method is to stop either the transmission or reception. This function should be called by user once the readinto or 
- write is done. 
+..
+ TODO: Once implemented. Mention no need of id, and the clock configuration requirements.
 
 ::
 
  from machine import I2S, Pin
  import array
- buf=bytearray(10) #Initilase buffer with required values for transmission & as empty buffer for reception
+ buf=bytearray(10) #Initialise buffer with required values for transmission & as empty buffer for reception
 
  audio_out = I2S(0, sck="P13_1", ws="P13_2", sd="P13_3", mode=I2S.TX, bits=16, format=I2S.STEREO, rate=22050, ibuf=20000) #create I2S object
  num_written = audio_out.write(buf) # write buffer of audio samples to I2S device 
  
 
  audio_in = I2S(1, sck="P5_4", ws="P5_5", sd="P5_6", mode=I2S.RX, bits=16, format=I2S.STEREO, rate=22050, ibuf=20000) # create I2S object
  num_read = audio_in.readinto(buf)# fill buffer with audio samples from I2S device
- audio_out.stop() # stop transmission
- audio_in.stop() # stop reception
 
-PSoc6 supports two I2S Bus. So id could be either 0 or 1. Please note that if both instances are running together then the sample rate should
-be either 8/16/32/48 or 22.05/44.01. Both the set of frequencies can't work together(For eg eg. 8 & 22.01 will cause error)
-Supported sample rates are 8KHz, 16KHz, 32KHz, 48KHz, 22.05KHz, 44.1KHz.
-PSoC6 supports only STEREO Mode. 
 
-.. note:: I2S Blocking mode is only supported