From cbdda7a50cbec13df2cdbb02ebdcf5ffa75cb9d5 Mon Sep 17 00:00:00 2001 From: enriquezgarc Date: Tue, 7 Nov 2023 10:35:18 +0100 Subject: [PATCH] docs/psoc6/quickref.rst: Cleaned merge conflict guards. Signed-off-by: enriquezgarc --- docs/psoc6/quickref.rst | 60 +---------------------------------------- 1 file changed, 1 insertion(+), 59 deletions(-) diff --git a/docs/psoc6/quickref.rst b/docs/psoc6/quickref.rst index 652744ac2601..89b542bceb6f 100644 --- a/docs/psoc6/quickref.rst +++ b/docs/psoc6/quickref.rst @@ -140,24 +140,10 @@ Methods Set pin value to its complement. -<<<<<<< HEAD -======= -Constants -^^^^^^^^^ -The following constants are used to configure the pin objects in addition to the ones mentioned in the :mod:`machine.Pin` class. - -.. data:: Pin.STATE_LOW - Pin.STATE_HIGH - - Selects the pin value. - -<<<<<<< HEAD ->>>>>>> 6a6924d9a (docs: Added docs and docs conf for PSoC6 port.) There's a higher-level abstraction :ref:`machine.Signal ` which can be used to invert a pin. Useful for illuminating active-low LEDs using ``on()`` or ``value(1)``. -======= ->>>>>>> 57a502306 (docs: Added docs and docs conf for PSoC6 port.) + Software I2C bus ---------------- @@ -258,7 +244,6 @@ The :mod:`network` module See :ref:`network.WLAN ` -<<<<<<< HEAD For some methods and constants, the PSoC6 network port implements certain specialization and slightly different behavior. This is explained in this section. Methods @@ -317,49 +302,6 @@ Security modes constants: .. note:: Power modes configuration not implemented. -<<<<<<< HEAD - -======= -======= -The network module is used to configure the WiFi connection.The WiFi interface for the station mode is only configured for -this port.Create WLAN interface object using :: - - import network - wlan = network.WLAN(network.STA_IF) # create station interface - -Scan for the available wireless networks using - -:: - - wlan.scan() - -Scan function returns a list of tuple information about access points -(ssid, bssid, channel, RSSI, security, hidden) .There are 7 levels of security: - - * ``0 - open``, - * ``1 - WEP``, - * ``2 - WPA``, - * ``3 - WPA2``, - * ``4 - WPA2_WPA``, - * ``5 - WPA3``, - * ``6 - WPS``, - * ``7 - Unknown security``. - -These are the other functions available in the network module - -:: - - wlan.active(True) # activate the interface - wlan.scan() # scan for access points - wlan.isconnected() # check if the station is connected to an AP - wlan.connect('ssid', 'key') # connect to an AP - wlan.disconnect() # disconnect from the connected AP - wlan.status() # check the link status and returns 1 for linkup & 0 for linkdown - wlan.ifconfig() # get the interface's IP/netmask/gateway/DNS addresses - - ->>>>>>> 57a502306 (docs: Added docs and docs conf for PSoC6 port.) ->>>>>>> 6a6924d9a (docs: Added docs and docs conf for PSoC6 port.) Here is a function you can run (or put in your boot.py file) to automatically connect to your WiFi network: ::