Build_Examples.yml

###############################################################################
#
# Copyright (C) 2022-2023 Maxim Integrated Products, Inc. (now owned by
# Analog Devices, Inc.),
# Copyright (C) 2023-2024 Analog Devices, Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
##############################################################################

name: Build_Examples

concurrency: 
  group: ${{ github.workflow }}-${{ github.ref }}
  cancel-in-progress: true

# Controls when the workflow will run
on:
  # Triggers the workflow on push or pull request events but only for the "main" branch
  push:
    branches: [ "main" ]
  pull_request:
    branches: [ "main" ]

  # Allows you to run this workflow manually from the Actions tab
  workflow_dispatch:

# A workflow run is made up of one or more jobs that can run sequentially or in parallel
jobs:
    
  Build_Examples:
    # The type of runner that the job will run on
    runs-on:
      - ubuntu-latest

    env:
      SOURCE_BRANCH: ${{github.ref_name}}
      TARGET_BRANCH: ${{github.event.pull_request.base.ref}}

    steps:
      # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
      - uses: actions/checkout@v4
        with:
          # Update the submodules below, doing so here will convert ssh to https
          submodules: false
          fetch-depth: 0
          ref: '${{ github.event.pull_request.head.ref }}'
          repository: '${{ github.event.pull_request.head.repo.full_name }}'

      - name: Get changed files
        id: changed-files
        uses: tj-actions/changed-files@v45
        with:
          files: |
            **.c
            **.h
            **.S
            **.s
            **.a
            **.cpp
            **.mk
            **/Makefile

      - name: List all changed files
        env:
          ALL_CHANGED_FILES: ${{ steps.changed-files.outputs.all_changed_files }}
        run: |
          echo ${ALL_CHANGED_FILES} > changed_files
          cat changed_files

      - name: Check watch files
        id: check_watch        
        run: |
          echo SOURCE_BRANCH = $SOURCE_BRANCH
          echo TARGET_BRANCH = $TARGET_BRANCH
          # Determine if we need to run the test
          RUN_TEST=0

          # Always run test if a workflow_dispatch
          if [[ $GITHUB_EVENT_NAME == "workflow_dispatch" ]]; then
            RUN_TEST=1
          fi

          if [[ $SOURCE_BRANCH == "main" ]]; then
            echo "Pushed to main, running test"
            RUN_TEST=1
          fi

          # Check for changes made to these files
          WATCH_FILES="\
            Build_Examples.yml \
            .c \
            .cpp \
            .S \
            .s \
            .h \
            .a \
            .mk \
            makefile \
            Makefile"

          if [[ -n $TARGET_BRANCH ]]; then
            # We are in a PR.  Need to check changes against the target branch.
            echo "Comparing PR against target branch: $TARGET_BRANCH"
            echo "Adding remote '$GITHUB_SERVER_URL/$GITHUB_REPOSITORY' as 'upstream'"
            git remote add upstream $GITHUB_SERVER_URL/$GITHUB_REPOSITORY
            echo "Fetching $TARGET_BRANCH"
            git fetch upstream $TARGET_BRANCH
            echo "diffing files"
            CHANGE_FILES=$(git diff --ignore-submodules --name-only remotes/upstream/$TARGET_BRANCH)
          fi

          echo "Watching these locations and files"
          echo $WATCH_FILES

          echo "Checking the following changes"
          echo $CHANGE_FILES

          for watch_file in $WATCH_FILES; do 
              for change_file in $CHANGE_FILES; do 
                  if [[ "${change_file,,}" == *"${watch_file,,}" ]]; then
                      echo "Match found. Watch type: $watch_file, File: $change_file"
                      RUN_TEST=1
                  fi
              done
          done

          # End the test early if there wasn't a significant change
          if [[ $RUN_TEST -eq 0 ]]; then
            echo "Skipping Build"
          else
            echo "Running Build"
          fi
          
          echo "RUN_TEST=$RUN_TEST" >> $GITHUB_OUTPUT
          
      - name: Install ARM GCC Toolchain (arm-none-eabi-gcc)
        uses: carlosperate/arm-none-eabi-gcc-action@v1
        id: arm-none-eabi-gcc-action
        if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }}
        with:
          release: '10.3-2021.10' # <-- The compiler release to use
          
      - name: Install RISCV GCC Toolchain (riscv-none-embed-gcc)
        if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }}
        run: |
          # Install RISCV tools
          npm install --global xpm@latest
          
          TOOL_VER=10.2.0-1.2.1
          xpm install --global @xpack-dev-tools/riscv-none-embed-gcc@$TOOL_VER
          cp -r /home/runner/.local/xPacks/@xpack-dev-tools/riscv-none-embed-gcc /home/runner/riscv-none-embed-gcc
          
          # Add riscv tools to path
          echo "/home/runner/riscv-none-embed-gcc/$TOOL_VER/.content/bin" >> $GITHUB_PATH

      - name: Install RISCV GCC Toolchain (riscv-none-elf-gcc)
        if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }}
        run: |
          # Install RISCV tools (updated)
          npm install --global xpm@latest
          
          # https://www.npmjs.com/package/@xpack-dev-tools/riscv-none-elf-gcc
          TOOL_VER=12.2.0-3.1
          xpm install --global @xpack-dev-tools/riscv-none-elf-gcc@$TOOL_VER
          cp -r /home/runner/.local/xPacks/@xpack-dev-tools/riscv-none-elf-gcc /home/runner/riscv-none-elf-gcc
          
          # Add riscv tools to path
          echo "/home/runner/riscv-none-elf-gcc/$TOOL_VER/.content/bin" >> $GITHUB_PATH

      - name: Install ccache
        if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }}
        run: |
          # Install ccache
          sudo apt install -y ccache

          # Prepend ccache into the PATH
          echo "/usr/bin" >> $GITHUB_PATH
          echo "/usr/lib/ccache" >> $GITHUB_PATH
          
          # Setup ccache links
          sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-addr2line
          sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-ar
          sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-as
          sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-c
          sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-c++filt
          sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-cpp
          sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-elfedit
          sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-g
          sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-gcc
          sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-gcc-10.2.1
          sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-gcc-ar
          sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-gcc-nm
          sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-gcc-ranlib
          sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-gcov
          sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-gcov-dump
          sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-gcov-tool
          sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-gdb-add-index
          sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-gdb-add-index-py
          sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-gdb-py
          sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-gprof
          sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-ld
          sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-ld.bfd
          sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-lto-dump
          sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-nm
          sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-objcopy
          sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-objdump
          sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-ranlib
          sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-readelf
          sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-size
          sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-strings
          sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-strip
          sudo ln -s ../../bin/ccache /usr/bin/riscv-none-embed-gcc

      - name: Setup Python
        if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }}
        uses: actions/setup-python@v4.5.0
        with:
          python-version: '3.10'

      - name: Install packages
        if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }}
        run: pip install -r .github/workflows/scripts/requirements.txt

      # Runs a set of commands using the runners shell
      - name: Build All Examples
        if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }}
        run: |
          # This environment variable is required for the SBTs.
          # It must be set to the absolute path inside the Github repo.
          export MAXIM_SBT_DIR=$(pwd)/Tools/SBT
          
          # Set MAXIM_PATH to limit warnings
          export MAXIM_PATH=$(pwd)

          python .github/workflows/scripts/build.py --change_file changed_files

  Regression_Test_Make_3_81:
    runs-on:
      - ubuntu-latest
    steps:
      - uses: actions/checkout@v3
        with:
          # Update the submodules below, doing so here will convert ssh to https
          submodules: false
          fetch-depth: 0
          ref: '${{ github.event.pull_request.head.ref }}'
          repository: '${{ github.event.pull_request.head.repo.full_name }}'      

      - name: Install Make 3.81
        run: |
          # Build and install Make version 3.81.
          cd $GITHUB_WORKSPACE
          ls -la
          wget https://ftp.gnu.org/gnu/make/make-3.81.tar.gz
          tar -xvf make-3.81.tar.gz
          cd make-3.81

          # Note: This patch is necessary to get make to build on Ubuntu-22.04.
          patch glob/glob.c $GITHUB_WORKSPACE/.github/workflows/patch/glob_patch.patch

          ./configure --prefix=$GITHUB_WORKSPACE/make-3.81
          make
          make install
          
          # Pre-prend 3.81 to path
          echo "$GITHUB_WORKSPACE/make-3.81/bin:$GITHUB_PATH" > $GITHUB_PATH
          make --version

      - name: Check Make Version
        run: |
          # If this fails, there is a setup issue with the workflow.
          VERSION_CHECK=$(make --version | grep 3.81)
          if [ ! "$VERSION_CHECK" ];then
            exit 2
          fi

      - name: Check watch files
        id: check_watch        
        run: |
          echo SOURCE_BRANCH = $SOURCE_BRANCH
          echo TARGET_BRANCH = $TARGET_BRANCH
          # Determine if we need to run the test
          RUN_TEST=0

          # Always run test if a workflow_dispatch
          if [[ $GITHUB_EVENT_NAME == "workflow_dispatch" ]]; then
            RUN_TEST=1
          fi

          if [[ $SOURCE_BRANCH == "main" ]]; then
            echo "Pushed to main, running test"
            RUN_TEST=1
          fi

          # Check for changes made to these files
          WATCH_FILES="\
            Build_Examples.yml \
            .c \
            .cpp \
            .S \
            .s \
            .h \
            .a \
            .mk \
            makefile \
            Makefile"

          if [[ -n $TARGET_BRANCH ]]; then
            # We are in a PR.  Need to check changes against the target branch.
            echo "Comparing PR against target branch: $TARGET_BRANCH"
            echo "Adding remote '$GITHUB_SERVER_URL/$GITHUB_REPOSITORY' as 'upstream'"
            git remote add upstream $GITHUB_SERVER_URL/$GITHUB_REPOSITORY
            echo "Fetching $TARGET_BRANCH"
            git fetch upstream $TARGET_BRANCH
            echo "diffing files"
            CHANGE_FILES=$(git diff --ignore-submodules --name-only remotes/upstream/$TARGET_BRANCH)
          fi

          echo "Watching these locations and files"
          echo $WATCH_FILES

          echo "Checking the following changes"
          echo $CHANGE_FILES

          for watch_file in $WATCH_FILES; do 
              for change_file in $CHANGE_FILES; do 
                  if [[ "${change_file,,}" == *"${watch_file,,}" ]]; then
                      echo "Match found. Watch type: $watch_file, File: $change_file"
                      RUN_TEST=1
                  fi
              done
          done

          # End the test early if there wasn't a significant change
          if [[ $RUN_TEST -eq 0 ]]; then
            echo "Skipping Build"
          else
            echo "Running Build"
          fi
          
          echo "RUN_TEST=$RUN_TEST" >> $GITHUB_OUTPUT

      - name: Install ARM GCC Toolchain (arm-none-eabi-gcc)
        uses: carlosperate/arm-none-eabi-gcc-action@v1
        id: arm-none-eabi-gcc-action
        if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }}
        with:
          release: '10.3-2021.10' # <-- The compiler release to use
          
      - name: Install RISCV GCC Toolchain (riscv-none-embed-gcc)
        if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }}
        run: |
          # Install RISCV tools
          npm install --global xpm@latest
          
          TOOL_VER=10.2.0-1.2.1
          xpm install --global @xpack-dev-tools/riscv-none-embed-gcc@$TOOL_VER
          cp -r /home/runner/.local/xPacks/@xpack-dev-tools/riscv-none-embed-gcc /home/runner/riscv-none-embed-gcc
          
          # Add riscv tools to path
          echo "/home/runner/riscv-none-embed-gcc/$TOOL_VER/.content/bin" >> $GITHUB_PATH

      - name: Install RISCV GCC Toolchain (riscv-none-elf-gcc)
        if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }}
        run: |
          # Install RISCV tools (updated)
          npm install --global xpm@latest
          
          # https://www.npmjs.com/package/@xpack-dev-tools/riscv-none-elf-gcc
          TOOL_VER=12.2.0-3.1
          xpm install --global @xpack-dev-tools/riscv-none-elf-gcc@$TOOL_VER
          cp -r /home/runner/.local/xPacks/@xpack-dev-tools/riscv-none-elf-gcc /home/runner/riscv-none-elf-gcc
          
          # Add riscv tools to path
          echo "/home/runner/riscv-none-elf-gcc/$TOOL_VER/.content/bin" >> $GITHUB_PATH

      - name: Setup Python
        if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }}
        uses: actions/setup-python@v4.5.0
        with:
          python-version: '3.10'

      - name: Install packages
        if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }}
        run: pip install -r .github/workflows/scripts/requirements.txt

      - name: Build PeriphDrivers and Hello_World
        if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }}
        run: |
          # This environment variable is required for the SBTs.
          # It must be set to the absolute path inside the Github repo.
          export MAXIM_SBT_DIR=$(pwd)/Tools/SBT
          
          # Set MAXIM_PATH to limit warnings
          export MAXIM_PATH=$(pwd)

          python .github/workflows/scripts/build.py --projects Hello_World