QualcommAX: ipq60xx: add support for JD Cloud AX1800 Pro

package/boot/uboot-envtools/files/qualcommax_ipq60xx

@@ -22,6 +22,11 @@ netgear,wax214)
 	[ -n "$idx" ] && \
 		ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x40000" "0x20000" "2"
 	;;
+jdc,ax1800-pro)
+	mmcpart="$(find_mmc_part 0:APPSBLENV)"
+	[ -n "$mmcpart" ] && \
+		ubootenv_add_uci_config "$mmcpart" "0x0" "0x40000" "0x20000" "2"
+	;;
 yuncore,fap650)
 	idx="$(find_mtd_index 0:appsblenv)"
 	[ -n "$idx" ] && \

package/firmware/ipq-wifi/Makefile

@@ -39,6 +39,7 @@ ALLWIFIBOARDS:= \
 	edimax_cax1800 \
 	glinet_gl-ax1800 \
 	glinet_gl-axt1800 \
+	jdc_ax1800-pro \
 	linksys_mx4200 \
 	linksys_mx5300 \
 	linksys_mx8500 \
@@ -167,6 +168,7 @@ $(eval $(call generate-ipq-wifi-package,edgecore_eap102,Edgecore EAP102))
 $(eval $(call generate-ipq-wifi-package,edimax_cax1800,Edimax CAX1800))
 $(eval $(call generate-ipq-wifi-package,glinet_gl-ax1800,GL.iNet GL-AX1800))
 $(eval $(call generate-ipq-wifi-package,glinet_gl-axt1800,GL.iNet GL-AXT1800))
+$(eval $(call generate-ipq-wifi-package,jdc_ax1800-pro,JD Cloud AX1800 Pro))
 $(eval $(call generate-ipq-wifi-package,linksys_mx4200,Linksys MX4200))
 $(eval $(call generate-ipq-wifi-package,linksys_mx5300,Linksys MX5300))
 $(eval $(call generate-ipq-wifi-package,linksys_mx8500,Linksys MX8500))

target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6000-jdc-ax1800-pro.dts

@@ -0,0 +1,335 @@
+/dts-v1/;
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ipq6018.dtsi"
+#include "ipq6018-512m.dtsi"
+#include "ipq6018-ess.dtsi"
+
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "JDCloud AX1800 Pro";
+	compatible = "jdc,ax1800-pro", "qcom,ipq6018-cp03", "qcom,ipq6018";
+
+	aliases {
+		sdhc1 = &sdhc_1;
+		serial0 = &blsp1_uart3;
+		led-boot = &status_red;
+		led-failsafe = &status_red;
+		led-running = &status_green;
+		led-upgrade = &status_green;
+		ethernet1 = &dp2;
+		ethernet2 = &dp3;
+		ethernet3 = &dp4;
+		ethernet4 = &dp5;
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8";
+		bootargs-append = " rootfstype=squashfs,ext4 coherent_pool=2M";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			debounce-interval = <60>;
+		};
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&leds_pins>;
+		pinctrl-names = "default";
+
+		status_blue: status_blue {
+			label = "blue:status";
+			gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+		};
+
+		status_red: status_red {
+			label = "red:status";
+			gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+		};
+
+		status_green: status_green {
+			label = "green:status";
+			gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <20 1>;
+
+	spi_1_pins: spi_1_pins {
+		mux {
+			pins = "gpio38","gpio39","gpio40","gpio41";
+			function = "blsp0_spi";
+			drive-strength = <0x08>;
+			bias-pull-down;
+		};
+	};
+
+	button_pins: button_pins {
+		mux {
+			pins = "gpio8", "gpio9";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	leds_pins: leds_pins {
+		mux {
+			pins = "gpio34", "gpio36", "gpio49";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	mdio_pinmux: mdio_pinmux {
+		mux_0 {
+			pins = "gpio64";
+			function = "mdc";
+			drive-strength = <0x08>;
+			bias-pull-up;
+		};
+
+		mux_1 {
+			pins = "gpio65";
+			function = "mdio";
+			drive-strength = <0x08>;
+			bias-pull-up;
+		};
+
+		mux_2 {
+			pins = "gpio75";
+			function = "gpio";
+		bias-pull-up;
+		};
+	};
+};
+
+
+&blsp1_uart3 {
+	pinctrl-0 = <&serial_3_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&blsp1_spi1 {
+	pinctrl-0 = <&spi_1_pins>;
+	pinctrl-names = "default";
+	cs-select = <0>;
+	status = "okay";
+
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		compatible = "n25q128a11";
+		linux,modalias = "m25p80", "n25q128a11";
+		spi-max-frequency = <50000000>;
+		use-default-sizes;
+	};
+};
+
+&prng {
+	status = "okay";
+};
+
+&cryptobam {
+	status = "okay";
+};
+
+&crypto {
+	status = "okay";
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&qusb_phy_0 {
+	status = "okay";
+};
+
+&qusb_phy_1 {
+	status = "okay";
+};
+
+
+&ssphy_0 {
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&edma {
+	status = "okay";
+};
+
+&rpm {
+	status = "disabled";
+};
+
+&mdio {
+	status = "okay";
+
+	pinctrl-0 = <&mdio_pinmux>;
+	pinctrl-names = "default";
+	reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
+
+	ethernet_0: ethernet-phy-package@0 {
+		compatible = "qcom,qca8075-package";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+		qcom,package-mode = "psgmii";
+
+		qca8075_1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+
+		qca8075_2: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <2>;
+		};
+
+		qca8075_3: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+		};
+
+		qca8075_4: ethernet-phy@4 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <4>;
+		};
+	};
+};
+
+&switch {
+	status = "okay";
+
+	switch_lan_bmp = <(ESS_PORT3 | ESS_PORT4 | ESS_PORT5)>; /* lan port bitmap */
+	switch_wan_bmp = <ESS_PORT2>; /* wan port bitmap */
+	switch_mac_mode = <MAC_MODE_PSGMII>;
+
+	qcom,port_phyinfo {
+		port@1 {
+			port_id = <2>;
+			phy_address = <1>;
+		};
+
+		port@2 {
+			port_id = <3>;
+			phy_address = <2>;
+		};
+
+		port@3 {
+			port_id = <4>;
+			phy_address = <3>;
+		};
+
+		port@4 {
+			port_id = <5>;
+			phy_address = <4>;
+		};
+	};
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&wifi {
+	status = "okay";
+	qcom,ath11k-calibration-variant = "JDC-AX1800-Pro";
+	qcom,ath11k-fw-memory-mode = <1>;
+};
+
+
+&dp2 {
+	phy-handle = <&qca8075_1>;
+	status = "okay";
+};
+
+&dp3 {
+	phy-handle = <&qca8075_2>;
+	status = "okay";
+};
+
+&dp4 {
+	phy-handle = <&qca8075_3>;
+	status = "okay";
+};
+
+&dp5 {
+	phy-handle = <&qca8075_4>;
+	phy-mode = "psgmii";
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	/delete-property/ mmc-hs400-1_8v;
+	mmc-hs200-1_8v;
+	mmc-ddr-1_8v;
+};
+
+&CPU0 {
+	/delete-property/ cpu-supply;
+};
+
+&CPU1 {
+	/delete-property/ cpu-supply;
+};
+
+&CPU2 {
+	/delete-property/ cpu-supply;
+};
+
+&CPU3 {
+	/delete-property/ cpu-supply;
+};