HaH_midi.h

//-----------------------
// Modes

enum Mode {
  KB, // 1
  FX, // 2
  CH  // 3
};

//-----------------------
// MIDI CC Assignments

const byte POT_CC_EX = 4;
const byte POT_CC_KB_5 = 66;
const byte POT_CC_KB_6 = 67;

const byte POT_CC_0 = 12;
const byte POT_CC_1 = 13;
const byte POT_CC_2 = 10;

const byte DEL_TAP_CC = 96;
const byte MUTE_CC = 120;

const byte CC_FX_MUTE = 69;

const byte ccValues_KB[7] = { 70, 71, 72, 73, 74, 75, 76 };
const byte ccValues_FX[7] = { 32, 33, 34, 35, 36, 37, 38 };
const byte ccValues_CH[7] = { 39, 40, 41, 42, 43, 44, 45 };

const byte MIDI_CHANNEL = 0;





// Input Pins with board constants
const int BUT_BIN_0 = 0;       // Serial Transmit (TX) - Digital Pin 1
const int BUT_BIN_1 = 1;       // Serial Receive (RX) - Digital Pin 0
const int BUT_BIN_2 = 2;
const int LED_0 = 7;
const int LED_1 = 6;
const int LED_2 = 5;
const int LED_3 = 8;
const int LED_4 = 10;
const int LED_5 = 16;
const int LED_6 = 9;
const int LED_M = 14;     // Digital Pin 14 (Assignment LED_SW)
const int BUT_M = 15;     // Digital Pin 15 (Assignment BUT_SW)
const int BUT_D = 4;     // Analog Pin 0 (Assignment BUT_D)
const int LED_D = 3;     // Analog Pin 1 (Assignment LED_D)

// Analog Pins

const int POT_EX = A0;     // Analog Pin 3 (Assignment EX)
const int POT_0 = A1;     // Analog Pin 3 (Assignment EX)
const int POT_1 = A2;     // Analog Pin 3 (Assignment EX)
const int POT_2 = A3;     // Analog Pin 3 (Assignment EX)

// Times
const int DEBOUNCETIME = 5;
const int BUT_READ_WAIT_TIME = 10;
const int DELAY_TAP_LED_TIME = 5;
const int MUTE_HOLD_TIME = 1000;

const int MODE_LIGHT_WAIT_TIME = 1000;
const int MODE_LIGHT_FLASH_TIME = 100;

//EX Pot Calibration Constants
const int POT_EX_START_VAL = 375;
const int POT_EX_END_VAL = 840;

// Other
const int RELEASEVEL = 127;
const int POT_THRESHOLD = 5;


// Array of LED pin constants
const int ledPins[7] = {LED_0, LED_1, LED_2, LED_3, LED_4, LED_5, LED_6};