Routers not connecting to each other as Installed, devices dropping out.

[Aguasclaras5]

Coordinator is Sonoff 3.0 USB Dongle Plus.
Flashed with ZStack CC1352P2_CC2652P_launchpad_coordinator_20231112
Routers are Sonoff 3.0 USB Dongle Plus
Flashed with CC2652R_router_20221102
Zigbee2mqtt add-on 1.34.0-1

Home Assistant
Core 2023.11.3
Supervisor 2023.11.6
Operating System 11.2
Frontend 20231030.2

IN DESPERATE NEED OF HELP
I used ZHA for my Zigbee devices for around 6 months, system was rock solid. The problem was it does not really support my Neo Sirens, 4 button scene switch, and most importantly to me, Moes Vibration Sensors, No way to adjust sensitivity. All of these I found fully supported in Zigbee2mqtt.

I setup z2m in office installed these devices and functioned perfectly. Then Proceeded to install thru house.

Please see Zigbee Map, when installing the routers , the garage was installed to Coordinator (10 meters),
Kitchen Foyer was installed via Garage (8 meters) and Kitchen Master was installed via Kitchen Foyer (12 Meters). I then mapped system to confirm they where in a chain. House is very wide, coordinator to window shade is 38 meters.
I then continued to install Window shades and sirens ( all router) and some contact and vibration sensors. When complete everything worked exception being some shades where hit and miss one or two responded as expected
.
Today almost nothing works, please see map. Some items don’t appear anymore in map. Contact’s that functioned yesterday don’t today, Map shows nothing in chain connection.

I tried to add 3 different contact switch via garage router today. Adds almost immediately but non function, 2 show battery, non show contact open or closed ( nor does light on contact flash when magnet becomes present but I can hear a click when magnet touching). If I delete and add via coordinator in works perfectly.

This is all the same hardware and locations as functioned for ZHA.