Hue Motion Sensor SML001 failing under zigbee2MQTT working on Hue Hub

[Busta999]

Device
Hue Motion Sensor Gen 1 - model [9290012607]
fw 6.1.1.27575
fw build 20190219

Over the last week 3 different Hue Gen 1 sensors have had this issue - so far tested

The issue is consistent and repeatable
The device is fully functioning under Hue Hub non functional under zigbee2MQTT

So far three of the 17 hue Motion sensors under zigbee2MQTT have failed like this 2 in the last 12 hours.

Only Gen 1 Indoor Hue Motion Sensors impacted so far

zigbee2MQTT
version 1.35.1
Coordinator zStack3x0 version 20230507

Symptoms
Sensors are reported as Online

Hue Motion Sensor stops reporting :

• Occupancy
• Temperature
• Battery
• illuminance
• lux

With Led Indication set to ON - the Motion sensor Led flashes on detecting motion - but nothing is reported in zigbee2MQTT

Replacing batteries - no change
Re- Pairing - no change

Remove from zigbee2MQTT and add to Hue Hub - devices starts functioning again and is fully functioning in HASS through Hue integration

Reboot HASS VM

Remove from Hue and re-add to zigbee2MQTT - same result devices connects - restoring original Friendly Name but with no Temp/Lux/battery/occupancy updates

[Kuchiru]

I have the same issue with a Gen1 motion sensor.

Firmware version 6.1.1.27575
Firmware build date 20190219
Z2M: 1.42.0
Hardware: EmberZNet 7.4.5 [GA]

The motion sensor is consistently stuck on all values it first reported and will not report any new changes just like @Busta999
Re-Pairing: no change
Batteries replaced: no change

Works with the ZHA integration without issue.