This repository contains the main firmware for LEDswarm controllers, although currently only on the Makerfabs DW3000 board. More board support will come soon.
Make sure you have cargo-espflash installed, then simply run make to build and flash to a connected ESP32 device:
make
Install cargo-espflash:
cargo install cargo-espflash
The controller is currently trying to find nearby devices to build a mesh with. If no devices are found within 30 seconds, the controller will switch itself into Master mode, start a new mesh network using the ultra-wideband radio and wait for other controllers to join the session over UWB.
Blinks cyan for a second followed by a pause of equal length.
The controller has found a nearby mesh and is currently trying to join the existing session.
Blinks cyan for a half a second followed by a pause of equal length, the same as the previous code but twice as fast.
The controller is currently connected to an UWB mesh in client (non-master) mode.
Three quick green blinks to indicate a successful connection.
The controller is managing a mesh network along with a Wi-Fi hotspot and waits for other controllers to join the session so that it can start a game.
The server meditates with a circulating rainbow until a second UWB device joins the session.
