Skip to content

Latest commit

 

History

History
151 lines (120 loc) · 7.47 KB

FB_VIRTUAL_INT_MQTT.md

File metadata and controls

151 lines (120 loc) · 7.47 KB
Raw

FB_VIRTUAL_INT_MQTT

General

A virtual function block can be used in one of two modes:

  • input: inputs a value in the PLC processing logic through MQTT.
  • output: outputs a value from the PLC processing logic through MQTT.

Block diagram

INPUT(S)

  • IN: datatype INT, input for the value that should be published through MQTT, provision this input when using the virtual function block in output mode.

OUTPUT(S)

  • OUT: datatype INT, output for the value that is received through the MQTT subscription. provision this output in other processing logic when using the virtual function block in input mode.

METHOD(S)

  • ConfigureFunctionBlockAsVirtualInput: configures the behaviour of the function block as a virtual input using the parameters below:

    • DefaultValue: datatype INT, value to set at startup if default value at startup behavior is configured.
    • SetDefaultValueStartup: datatype BOOL, set to TRUE to set the DefaultValue at PLC startup.
    • PublishAtStartup: datatype BOOL, set to TRUE to get an MQTT publish message of the virtual input value at PLC startup.
    • UsePersistentAtStartup: datatype BOOL, set to TRUE to use persistence to maintain the virtual input value through power cycles.
    • ConfirmReceival: datatype BOOL, set to TRUE to get an MQTT publish message when the value is updated.

  • ConfigureFunctionBlockAsVirtualOutput: configures the behaviour of the function block as a virtual output using the parameters below:

    • PublishAtStartup: datatype BOOL, set to TRUE to get an MQTT publish message of the virtual output value at PLC startup.

  • InitMQTT: enables MQTT events on the FB, an overview of the parameters:

    • MQTTPublishPrefix: datatype POINTER TO STRING, pointer to the MQTT publish prefix that should be used for publishing any messages/events for this FB. Suffix is automatically set to FB name.
    • MQTTSubscribePrefix: datatype POINTER TO STRING, pointer to the MQTT subscribe prefix that should be used for publishing any messages/events to this FB. Suffix is automatically set to FB name.
    • pMqttPublishQueue: datatype POINTER TO FB_MqttPublishQueue, pointer to the MQTT queue to publish messages.
    • pMqttCallbackCollector: datatype SD_MQTT.CallbackCollector, pointer to the MQTT callback collector, required to register FB for subscriptions on a certain topic.
    • MqttQos: datatype SD_MQTT.QoS, configures the MQTT Qos for the function block published messages.
    • MqttRetain: datatype BOOL, configures the MQTT retain flag for the function block published messages.

  • PublishReceived: callback method called by the callbackcollector when a message is received on the subscribed topic by the callbackcollector.

  • SetValue: method to set the function block virtual value, only works if the function block is in output mode.

MQTT publish behavior

Requires method call InitMQTT to enable MQTT capabilities. Only applicable if the function block is configured in output mode, outputting the value on input IN or set using the SetValue method through MQTT.

Event Description MQTT payload QoS Retain flag Published on startup
input changes: IN A change is detected on input IN. TRUE/FALSE configured in method call InitMQTT configured in method call InitMQTT configured in method call InitMQTT

MQTT publish topic is a concatenation of the publish prefix and the function block name.

MQTT subscribe behavior

Requires method call InitMQTT to enable MQTT capabilities. Only applicable is the function block is configured in input mode which will allow the input of a value to the PLC through MQTT which will be exposed on the function block OUT output. Commands are executed by the FB if the topic MQTTSubscribeTopic matches the MQTT topic and the payload exists in the table below.

Command Description expected payload Additional notes
Change output to integer value Request to change output to a specific integer value. an integer value

MQTT subscription topic is a concatenation of the subscribe prefix variable and the function block name.

Code example

  • variables initiation:
MqttPubVirtualPrefix            :STRING(100) := 'Devices/PLC/House/Out/Virtuals/';
MqttSubVirtualPrefix            :STRING(100) := 'Devices/PLC/House/In/Virtuals/';
FB_VIRTUAL_INT_001              :FB_VIRTUAL_INT_MQTT;
  • Init MQTT method call (called once during startup):
FB_VIRTUAL_INT_001.InitMqtt(MQTTPublishPrefix:= ADR(MqttPubVirtualPrefix),				
	MQTTSubscribePrefix:= ADR(MqttSubVirtualPrefix),									
	pMqttPublishQueue := ADR(MqttVariables.fbMqttPublishQueue),						
	pMqttCallbackCollector := ADR(MqttVariables.collector_FB_VIRTUAL_MQTT),
	MqttQos:=SD_MQTT.QoS.ExactlyOnce, 
	MqttRetain:=FALSE											
);

The MQTT publish topic in this code example will be Devices/PLC/House/Out/Virtuals/FB_VIRTUAL_INT_001 (MQTTPubSwitchPrefix variable + function block name). The subscription topic will be Devices/PLC/House/In/Virtuals/FB_VIRTUAL_INT_001 (MQTTSubSwitchPrefix variable + function block name).

  • Configuring the function block as a virtual input (called once during startup):
FB_VIRTUAL_INT_001.ConfigureFunctionBlockAsVirtualInput(DefaultValue:=12,
    SetDefaultValueStartup:=TRUE,
    PublishAtStartup:=TRUE,
    UsePersistentAtStartup:=FALSE,
    ConfirmReceival:=TRUE
);
  • Calling the virtual function block to allow processing (cyclic):
FB_VIRTUAL_INT_001();
  • Using the virtual function block value when using input mode (cyclic):
X:=FB_VIRTUAL_INT_001.OUT;

A value X in the PLC is set to the OUT value of the virtual function block, the OUT value being controlled through MQTT.

  • Using the virtual function block value when using output mode (cyclic):
FB_VIRTUAL_INT_001.IN:=X;

A value X in the PLC is set to the IN value of the virtual function block, the IN value being published through MQTT.

Home Assistant YAML

When using the function block as a virtual output use the YAML code below in your MQTT Sensor config to integrate with Home Assistant:

mqtt:
  sensor:
  - name: "FB_VIRTUAL_INT_001"
    state_topic: "Devices/PLC/House/Out/Virtuals/FB_VIRTUAL_INT_001"
    qos: 2  
    availability_topic: "Devices/PLC/House/availability"
    payload_available: "online"
    payload_not_available: "offline"

When using the function block as a virtual input use the YAML code below in your Input Number config to integrate with Home Assistant:

input_number:
  fb_virtual_int_001:
    name: friendly name
    min: 1
    max: 30
    step: 1
    unit_of_measurement: degrees
    icon: mdi:target

Configure the automation below in your automations.yaml file to publish any changes on the Input Number slider on a MQTT topic:

- id: fb_virtual_int_001-to-mqtt
  alias: FB_VIRTUAL_INT_001 slider moved
  trigger:
    platform: state
    entity_id: input_number.fb_virtual_int_001
  action:
    service: mqtt.publish
    data_template:
      topic: 'Devices/PLC/House/In/Virtuals/FB_VIRTUAL_INT_001'
      retain: true
      payload: "{{ states('input_number.fb_virtual_int_001') | int }}"