diff --git a/docs/make.jl b/docs/make.jl
index 5befc20519..2004144c69 100644
--- a/docs/make.jl
+++ b/docs/make.jl
@@ -18,6 +18,7 @@ pages = OrderedDict(
             "...install PowerSystems.jl" => "how_to/install.md",
             "...load a `system` from `PowerSystemCaseBuilder`" => "how_to/powersystembuilder.md",
             "...parse data from Matpower, PSSE, or CSV files" => "how_to/parsing.md",
+            "...add a component using natural units (MW)" => "how_to/add_component_natural_units.md",
             "...add time series data from CSVs" => "how_to/add_ts_from_csvs.md",
             "...customize the tabular data parser" => "how_to/extend_tabular_parsing.md",
             "...get all the buses in a system" => "how_to/get_buses.md",
diff --git a/docs/src/how_to/add_component_natural_units.md b/docs/src/how_to/add_component_natural_units.md
new file mode 100644
index 0000000000..3b29d4e3d6
--- /dev/null
+++ b/docs/src/how_to/add_component_natural_units.md
@@ -0,0 +1,90 @@
+# Add a Component in Natural Units
+
+```@setup add_in_nu
+using PowerSystems; #hide
+using PowerSystemCaseBuilder #hide
+system = build_system(PSISystems, "modified_RTS_GMLC_DA_sys"); #hide
+```
+
+`PowerSystems.jl` has [three per-unitization options](@ref per_unit) for getting, setting
+and displaying data.
+
+Currently, only one of these options -- `"DEVICE_BASE"` -- is supported when using a
+constructor function define a component. You can see
+[an example of the default capabilities using `"DEVICE_BASE"` here](@ref "Adding Loads and Generators").
+
+We hope to add capability to define components in
+`"NATURAL_UNITS"` with constructors in the future, but for now, below is a workaround
+for users who prefer to define data using `"NATURAL_UNITS"` (e.g., MW, MVA, MVAR, or MW/min):
+
+### Step 1: Set Units Base
+
+Set your (previously-defined) `System`'s units base to `"NATURAL_UNITS"`:
+
+```@repl add_in_nu
+set_units_base_system!(system, "NATURAL_UNITS")
+```
+
+Now, the "setter" functions have been switched to define data using natural units (MW, MVA,
+etc.), taking care of the necessary data conversions behind the scenes.
+
+### Step 2: Define Empty Component
+
+Define an empty component with `0.0` or `nothing` for all the power-related fields except
+`base_power`, which is always in MVA.
+
+For example:
+
+```@repl add_in_nu
+gas1 = ThermalStandard(;
+    name = "gas1",
+    available = true,
+    status = true,
+    bus = get_component(ACBus, system, "Cobb"), # Attach to a previously-defined bus named Cobb
+    active_power = 0.0,
+    reactive_power = 0.0,
+    rating = 0.0,
+    active_power_limits = (min = 0.0, max = 0.0),
+    reactive_power_limits = nothing,
+    ramp_limits = nothing,
+    operation_cost = ThermalGenerationCost(nothing),
+    base_power = 30.0, # MVA
+    time_limits = (up = 8.0, down = 8.0), # Hours, unaffected by per-unitization
+    must_run = false,
+    prime_mover_type = PrimeMovers.CC,
+    fuel = ThermalFuels.NATURAL_GAS,
+);
+```
+
+### Step 3: Attach the Component
+
+Attach the component to your `System`:
+
+```@repl add_in_nu
+add_component!(system, gas1)
+```
+
+### Step 4: Add Data with "setter" Functions
+
+Use individual "setter" functions to set each the value of each numeric field in natural
+units:
+
+```@repl add_in_nu
+set_rating!(gas1, 30.0) #MVA
+set_active_power_limits!(gas1, (min = 6.0, max = 30.0)) # MW
+set_reactive_power_limits!(gas1, (min = 6.0, max = 30.0)) # MVAR
+set_ramp_limits!(gas1, (up = 6.0, down = 6.0)) #MW/min
+```
+Notice the return values are divided by the `base_power` of 30 MW, showing the setters have
+done the per-unit conversion into `"DEVICE_BASE"` behind the scenes.
+
+!!! tip
+    
+    Steps 2-4 can be called within a `for` loop to define many components at once (or step 3
+    can be replaced with [`add_components!`](@ref) to add all components at once).
+
+#### See Also
+
+  - [Read more to understand per-unitization in PowerSystems.jl](@ref per_unit)
+  - Learn how to use the default constructors and explore the per-unitization settings in
+    [Create and Explore a Power `System`](@ref)
diff --git a/docs/src/tutorials/creating_system.md b/docs/src/tutorials/creating_system.md
index 26b9a4de2a..3e5b12d233 100644
--- a/docs/src/tutorials/creating_system.md
+++ b/docs/src/tutorials/creating_system.md
@@ -378,3 +378,4 @@ Next, you might want to:
   - [Import a `System` from an existing Matpower or PSSE file instead of creating it manually](@ref parsing)
   - [Create your own `System` from .csv files instead of creating it manually](@ref table_data)
   - [Read more to understand per-unitization in PowerSystems.jl](@ref per_unit)
+  - See a workaround for how to [Add a Component in Natural Units](@ref)