Skip to content

Latest commit

 

History

History
60 lines (45 loc) · 2.96 KB

README.md

File metadata and controls

60 lines (45 loc) · 2.96 KB
Raw

ameba-rtos-z2

GitHub ameba-rtos-z2 repository is the development framework for AmebaZ2 and AmebaZ2Plus SOCs.

Supported SoCs

Chip Project
AmebaZ2 /project/realtek_amebaz2_v0_example
AmebaZ2Plus /project/realtek_amebaz2plus_v0_example

Documentation

Matter Support

Please check out ameba-rtos-matter to learn more about Matter support.

Setup Build Environments

GCC Environment on Windows

On Windows, you can use Cygwin as the GCC environment. Cygwin is a large collection of GNU and Open Source tools which provide the similar functionality as a Linux distribution on Windows. Please visit the official website of Cygwin and install the software.

Note:

  • Please use Cygwin 32-bit version.
  • During the Cygwin installation, please install "math -> bc" and "devel -> make".

GCC Environment on Linux

On 64-bit Linux, please install packages for the GCC environment.

  • Use command apt-get install make to install "make".
  • Use command apt-get install bc to install "bc".

Configure the Project

  • For general configurations, you can configure the options in "platform_opts.h".
  • For BT configurations, you can configure the options in "platform_opts_bt.h".

Compile the Project

  1. Open the Cygwin Terminal or Linux terminal.
  2. Direct to compile path. Execute command cd /project/.../GCC-RELEASE.
  3. Clean up pervious compilation files. Execute command make clean.
  4. Build the SDK. Execute command make all.
  5. Make sure there is no error after compilation.

Download image

After a successfully compilation, the images partition.bin, bootloader.bin, firmware_is.bin and flash_is.bin can be seen in the folder/sub-folder of /GCC-RELEASE.

  • partition.bin stores partition table, recording the address of Boot image and firmware image;
  • bootloader.bin is bootloader image;
  • firmware_is.bin is application image;
  • flash_is.bin links partition.bin, bootloader.bin and firmware_is.bin.

To download image to board, you can either

  • Directly download the image binary to board from GCC (J-Link debugger is required), please check the ApplicationNote chapter SDK Build Environment Setup for more details.
  • Or using the PG tool for Ameba-ZII (in /tools/AmebaZ2), please check the ApplicationNote chapter Image Tool for more details.

Note: Please choose flash_is.bin when downloading image by PG Tool.

Release Notes

Vesion Sync

GitHub ameba-rtos-z2 is currently synchronized with 7.1 GIT 240830_26dad548.