Impossible to get 122 MSp/s samplerate on BladeRF xA4 with no signal interruptions

[tolstishka]

Hi.
I have BladeRF xA4.
In my tests I want to play a bin-file with sinusoidal signal by BladeRF device with sampling rate 100 MSp/s.
But it can plays only on 80 MSp/s with no signal interruptions.
I switched "Oversample" mode on and use Asynchronous API.
In my test I use GNUradio for viewing signal and the other BladeRF device as a source RX.

Could you explain please, how to get 100 - 122 MSp/s samplerate with no signal interruptions?

This is a signal with interruptions and 100 MSp/s samplerate:

This is a signal without interruptions and 76 MSp/s samplerate:

[antiduh]

It's possible your USB connection is insufficient to support the raw bitrate of the sample stream. Are you sure you're using an unshared USB 3.0 or better connection with 5 gbit/sec support?

122 megasamples/sec * 8 bits/channel * 2 channels/sample = 122 * 8 * 2 == 1.952 gigabit/sec.