!fuses.txt

ATmega328P fuse: low 42 (default 62), high D1 (default D9), ext FE (default FF)

low: bit 4,5 = SUT[1:0] for value 0 the BOD is on (brown-out detection),
	bit 7: presets the RC division to 8 (i.e. starts with a frequency of 8 MHz)

high: bit 3: 0=do not erase EEPROM during programming

ext: BODLEVEL[2:0] = 110 = 1.7..2.0 V




boot loader:
  ATmega328P fuse: low E2 (default 62), high D2 (default D9), ext FF (default FF)
  (fuse high bit 3: 0=do not erase EEPROM during programming)
  (reset vector BOOT, boot size 2 KB)



Supported processors:

ATmega48 (atmega48, atmega48p), 65,- 4K ROM, 512 RAM, 256 EE https://www.gme.cz/atmega48-20pu-dil28-atmel
ATmega88PA (atmega88, atmega88p, atmega88pa), 55,- 8K ROM, 1K RAM, 512 EE https://www.gme.cz/atmega88pa-pu-dil28-atmel
ATmega8L (atmega8), 68,- 8K ROM, 1K RAM, 512 EE https://www.gme.cz/atmega8l-8pu-dil28-atmel
ATmega8A (atmega8), 68,- 8K ROM, 1K RAM, 512 EE https://www.gme.cz/atmega8a-pu-dip28-atmel
ATmega328P (atmega328, atmega328p), 73,- 32K ROM, 2K RAM, 1K EE https://www.gme.cz/atmega328p-pu-sdip28-atmel
ATmega168 (atmega168, atmega168p), 89,- 16K ROM, 1K RAM, 512 EE https://www.gme.cz/atmega168-20pu-dil28-atmel

atmega48
atmega48p
atmega8
atmega88
atmega88p
atmega88pa
atmega168
atmega168p
atmega328
atmega328p

TI error test: http://www.datamath.org/Story/LogarithmBug.htm