-
Notifications
You must be signed in to change notification settings - Fork 3
Home
Welcome to the grbl wiki! Please feel free to modify these pages to help keep grbl up-to-date!
Grbl is a free, open source, high performance CNC milling controller written in optimized C that will run on a straight Arduino.
Makers who do milling and need a nice, simple controller for their system (and who can handle the lack of a user friendly, graphical client). People who loathe to clutter their space with legacy PC-towers just for the parallel-port. Tinkerers who need a controller written in tidy, modular C as a basis for their project.
###Nice features
Grbl is ready for light duty production. We use it for all our milling, running it from our laptops using a simple console script (included) to stream the G-code. It is written in optimized C utilizing all the clever features of the Arduino's Atmega328p chips to achieve precise timing and asynchronous operation. It is able to maintain more than 30kHz step rate and delivers a clean, jitter free stream of control pulses.
Grbl is for three axis machines. No rotation axes – just X, Y, and Z.
The G-code interpreter implements a subset of the NIST rs274/ngc standard and is tested with the output of a number of CAM-tools with no issues. Linear, circular and helical motion are all fully supported.
- Supported G-Codes on v0.7 master: Linear Motions (G0,G1), Arc Motions (G2,G3), Dwell (G4), Plane Selection (G17,G18,G19), Units (G20,G21), Homing* (G28,G30), Distance Modes (G90,G91), Feedrate Modes (G93,G94), Coordinate Offset (G92), Spindle Control (M3,M4,M5), and Others (G53,G80).
Most configuration options can be set at runtime and is saved in eeprom between sessions and even retained between different versions of Grbl as you upgrade the firmware.
###Acceleration management
The most requested feature that we really wanted to have was a nice and advanced look-ahead acceleration manager. In early versions, some users were not able to run their CNCs at full speed without some kind of easing. Grbl’s full acceleration-management with look ahead planner will ease into the fastest feed rates and brake before sharp corners for fast yet jerk free operation.
###Limitations by design
We have limited g-code-support by design. Grbl supports all the common operations encountered in output from CAM-tools, but leave some human g-coders frustrated. No variables, no tool offsets, no functions, no canned cycles, no arithmetic and no control structures. Just the basic machine operations and capabilities. We have yet to find a CAM-generated file that failed to run, though.
Grbl is licenced under the GNU General Public License and developed by Simen Svale Skogsrud and Sungeun K. Jeon.
Grbl is under-going heavy development and new features are being added all the time. The current development branch is called v0.8 edge, and these firmware builds are available for testing on the Downloads page. Please report any bugs to administrators to help make Grbl rock-solid!
Here's a short list of new features that are available or will soon be available on the new version:
- Additional New G-Codes: Coordinate System Select (G54-G59), Set Coordinate System Data (G10,G28.1,G30.1), Coordinate Offset Disable (G92.1), and Program Stop (M0,M1,M2,M30). Coordinate system data is persistent and kept in EEPROM.
- Multi-Tasking Run-time Commands: Feed Hold with Controlled Deceleration for No Loss of Location, Resume After Feed Hold, Reset, and Status Reporting.
- Switches: Check g-code mode, single block, block delete, optional stop
- Homing cycle and hard limits. Both configurable via settings. Only requires normally-open switches connected from the limit pins to ground.
- Improved feedback: Reports real-time position, g-code modes, and stored coordinate parameters.
- Startup blocks: Automatically runs user g-code blocks at startup or reset. Can be used to set your defaults.
- Pin-outs: Cycle start, feed hold, and abort are now pinned-out to the A0, A1, and A2 pins. Just connect a normally-open switch to the pin and ground. That's it!
- Robust G-Code Parser with Error Checking Feedback.
- And much more!