{{Manual:TOC}}
FreeCAD는 자유 오픈 소스 parametric 3D 모델링 프로그램입니다. 주로 3D 프린팅할 수 있는 물체에 초점을 맞춰 소형 전자 부품부터 건물이나 토목 공학과 같은 대형 물체에 이르기까지 실제 물체를 모델링하기 위해 제작되었다. FreeCAD is free to download, use, distribute and modify, and its source code is open and published under the very permissive LGPL license. The data you produce with FreeCAD is fully yours, and can be recovered without FreeCAD.
FreeCAD는 근본적으로 사회적 프로젝트이며, FreeCAD에 대한 열정으로 개발자와 사용자 커뮤니티가 개발하고 유지 관리합니다.
This manual is an experiment, taking a different approach from the official FreeCAD documentation wiki. The wiki is written collaboratively by dozens of community members. Like most wikis, it contains huge amounts of information but is somewhat difficult to access and navigate by newcomers. This makes it an excellent resource for reference, but a less practical tool for learning FreeCAD. This manual will walk you through much of the information available on the wiki, but we hope the step-by-step approach based on examples and a more unified tone due to a smaller number of authors will make it more suitable for a first contact with FreeCAD. It will become a companion for the wiki, but not replace it.
이 매뉴얼은 FreeCAD의 최신 안정 버전 0.18(2019년 초반)용으로 썼습니다.
The contents of this manual are published under the Creative Commons 4.0 license, and can be freely used, downloaded, copied, and modified. The source files for this manual are hosted on this wiki, and on the original github account used to write the first version of this book. Easier to read HTML, PDF, MOBI and EPUB versions are available on GitBook. A printed version is being prepared.
documentation index > Manual:Introduction/ko