From a901655914caef1cc72f27303a30452160e25f88 Mon Sep 17 00:00:00 2001 From: Mohamad Amin Zangooei <63298088+moAmza@users.noreply.github.com> Date: Sun, 1 Oct 2023 23:23:26 +0330 Subject: [PATCH] support-v15&14 (#9) * fix cli version tags * add recovery.conf for v14 and v15 * modify replica model * remove sudo commands * fix commented recovery_min_apply_delay line * modify handling of recovery_min_apply_delay line * fix commented recovery_min_apply_delay line --------- Co-authored-by: amin --- pgkit/application/models/replica.py | 5 +- pgkit/application/templates/14-recovery.conf | 837 +++++++++++++++++++ pgkit/application/templates/15-recovery.conf | 837 +++++++++++++++++++ pgkit/cli/commands/config.py | 4 +- 4 files changed, 1679 insertions(+), 4 deletions(-) create mode 100644 pgkit/application/templates/14-recovery.conf create mode 100644 pgkit/application/templates/15-recovery.conf diff --git a/pgkit/application/models/replica.py b/pgkit/application/models/replica.py index 1051c1a..810aa3a 100644 --- a/pgkit/application/models/replica.py +++ b/pgkit/application/models/replica.py @@ -132,7 +132,8 @@ def create_base_backup(self): def recovery(self, target_time): self.configure_recovery_file(recovery=True, recovery_target_time=target_time) - self._rename_partial_wal_file() + if self.use_separate_receivewal_service: + self._rename_partial_wal_file() self.restart() def get_config_parameter_value(self, parameter): @@ -256,7 +257,7 @@ def _get_current_delay(self): config = read_file(file_location) for line in config.split('\n'): - if 'recovery_min_apply_delay' in line: + if line.startswith('recovery_min_apply_delay'): return int(line.split(' ')[2].split("min")[0]) / 60 def _get_replication_slot_status(self): diff --git a/pgkit/application/templates/14-recovery.conf b/pgkit/application/templates/14-recovery.conf new file mode 100644 index 0000000..1e60284 --- /dev/null +++ b/pgkit/application/templates/14-recovery.conf @@ -0,0 +1,837 @@ +# ----------------------------- +# PostgreSQL configuration file +# ----------------------------- +# +# This file consists of lines of the form: +# +# name = value +# +# (The "=" is optional.) Whitespace may be used. Comments are introduced with +# "#" anywhere on a line. The complete list of parameter names and allowed +# values can be found in the PostgreSQL documentation. +# +# The commented-out settings shown in this file represent the default values. +# Re-commenting a setting is NOT sufficient to revert it to the default value; +# you need to reload the server. +# +# This file is read on server startup and when the server receives a SIGHUP +# signal. If you edit the file on a running system, you have to SIGHUP the +# server for the changes to take effect, run "pg_ctl reload", or execute +# "SELECT pg_reload_conf()". Some parameters, which are marked below, +# require a server shutdown and restart to take effect. +# +# Any parameter can also be given as a command-line option to the server, e.g., +# "postgres -c log_connections=on". Some parameters can be changed at run time +# with the "SET" SQL command. +# +# Memory units: B = bytes Time units: us = microseconds +# kB = kilobytes ms = milliseconds +# MB = megabytes s = seconds +# GB = gigabytes min = minutes +# TB = terabytes h = hours +# d = days + + +#------------------------------------------------------------------------------ +# FILE LOCATIONS +#------------------------------------------------------------------------------ + +# The default values of these variables are driven from the -D command-line +# option or PGDATA environment variable, represented here as ConfigDir. + +data_directory = '/var/lib/postgresql/14/{{ name }}' # use data in another directory + # (change requires restart) +hba_file = '/etc/postgresql/14/{{ name }}/pg_hba.conf' # host-based authentication file + # (change requires restart) +ident_file = '/etc/postgresql/14/{{ name }}/pg_ident.conf' # ident configuration file + # (change requires restart) + +# If external_pid_file is not explicitly set, no extra PID file is written. +external_pid_file = '/var/run/postgresql/14-{{ name }}.pid' # write an extra PID file + # (change requires restart) + + +#------------------------------------------------------------------------------ +# CONNECTIONS AND AUTHENTICATION +#------------------------------------------------------------------------------ + +# - Connection Settings - + +listen_addresses = '*' # what IP address(es) to listen on; + # comma-separated list of addresses; + # defaults to 'localhost'; use '*' for all + # (change requires restart) +port = {{ standby_port }} # (change requires restart) +max_connections = {{ max_connections }} # (change requires restart) +#superuser_reserved_connections = 3 # (change requires restart) +unix_socket_directories = '/var/run/postgresql' # comma-separated list of directories + # (change requires restart) +#unix_socket_group = '' # (change requires restart) +#unix_socket_permissions = 0777 # begin with 0 to use octal notation + # (change requires restart) +#bonjour = off # advertise server via Bonjour + # (change requires restart) +#bonjour_name = '' # defaults to the computer name + # (change requires restart) + +# - TCP settings - +# see "man tcp" for details + +#tcp_keepalives_idle = 0 # TCP_KEEPIDLE, in seconds; + # 0 selects the system default +#tcp_keepalives_interval = 0 # TCP_KEEPINTVL, in seconds; + # 0 selects the system default +#tcp_keepalives_count = 0 # TCP_KEEPCNT; + # 0 selects the system default +#tcp_user_timeout = 0 # TCP_USER_TIMEOUT, in milliseconds; + # 0 selects the system default + +#client_connection_check_interval = 0 # time between checks for client + # disconnection while running queries; + # 0 for never + +# - Authentication - + +#authentication_timeout = 1min # 1s-600s +#password_encryption = scram-sha-256 # scram-sha-256 or md5 +#db_user_namespace = off + +# GSSAPI using Kerberos +#krb_server_keyfile = 'FILE:${sysconfdir}/krb5.keytab' +#krb_caseins_users = off + +# - SSL - + +ssl = on +#ssl_ca_file = '' +ssl_cert_file = '/etc/ssl/certs/ssl-cert-snakeoil.pem' +#ssl_crl_file = '' +#ssl_crl_dir = '' +ssl_key_file = '/etc/ssl/private/ssl-cert-snakeoil.key' +#ssl_ciphers = 'HIGH:MEDIUM:+3DES:!aNULL' # allowed SSL ciphers +#ssl_prefer_server_ciphers = on +#ssl_ecdh_curve = 'prime256v1' +#ssl_min_protocol_version = 'TLSv1.2' +#ssl_max_protocol_version = '' +#ssl_dh_params_file = '' +#ssl_passphrase_command = '' +#ssl_passphrase_command_supports_reload = off + + +#------------------------------------------------------------------------------ +# RESOURCE USAGE (except WAL) +#------------------------------------------------------------------------------ + +# - Memory - + +shared_buffers = 128MB # min 128kB + # (change requires restart) +#huge_pages = try # on, off, or try + # (change requires restart) +#huge_page_size = 0 # zero for system default + # (change requires restart) +#temp_buffers = 8MB # min 800kB +#max_prepared_transactions = 0 # zero disables the feature + # (change requires restart) +# Caution: it is not advisable to set max_prepared_transactions nonzero unless +# you actively intend to use prepared transactions. +#work_mem = 4MB # min 64kB +#hash_mem_multiplier = 2.0 # 1-1000.0 multiplier on hash table work_mem +#maintenance_work_mem = 64MB # min 1MB +#autovacuum_work_mem = -1 # min 1MB, or -1 to use maintenance_work_mem +#logical_decoding_work_mem = 64MB # min 64kB +#max_stack_depth = 2MB # min 100kB +#shared_memory_type = mmap # the default is the first option + # supported by the operating system: + # mmap + # sysv + # windows + # (change requires restart) +dynamic_shared_memory_type = posix # the default is usually the first option + # supported by the operating system: + # posix + # sysv + # windows + # mmap + # (change requires restart) +#min_dynamic_shared_memory = 0MB # (change requires restart) + +# - Disk - + +#temp_file_limit = -1 # limits per-process temp file space + # in kilobytes, or -1 for no limit + +# - Kernel Resources - + +#max_files_per_process = 1000 # min 64 + # (change requires restart) + +# - Cost-Based Vacuum Delay - + +#vacuum_cost_delay = 0 # 0-100 milliseconds (0 disables) +#vacuum_cost_page_hit = 1 # 0-10000 credits +#vacuum_cost_page_miss = 2 # 0-10000 credits +#vacuum_cost_page_dirty = 20 # 0-10000 credits +#vacuum_cost_limit = 200 # 1-10000 credits + +# - Background Writer - + +#bgwriter_delay = 200ms # 10-10000ms between rounds +#bgwriter_lru_maxpages = 100 # max buffers written/round, 0 disables +#bgwriter_lru_multiplier = 2.0 # 0-10.0 multiplier on buffers scanned/round +#bgwriter_flush_after = 512kB # measured in pages, 0 disables + +# - Asynchronous Behavior - + +#backend_flush_after = 0 # measured in pages, 0 disables +#effective_io_concurrency = 1 # 1-1000; 0 disables prefetching +#maintenance_io_concurrency = 10 # 1-1000; 0 disables prefetching +max_worker_processes = {{ max_worker_processes }} # (change requires restart) +#max_parallel_workers_per_gather = 2 # taken from max_parallel_workers +#max_parallel_maintenance_workers = 2 # taken from max_parallel_workers +#max_parallel_workers = 8 # maximum number of max_worker_processes that + # can be used in parallel operations +#parallel_leader_participation = on +#old_snapshot_threshold = -1 # 1min-60d; -1 disables; 0 is immediate + # (change requires restart) + + +#------------------------------------------------------------------------------ +# WRITE-AHEAD LOG +#------------------------------------------------------------------------------ + +# - Settings - + +#wal_level = replica # minimal, replica, or logical + # (change requires restart) +#fsync = on # flush data to disk for crash safety + # (turning this off can cause + # unrecoverable data corruption) +#synchronous_commit = on # synchronization level; + # off, local, remote_write, remote_apply, or on +#wal_sync_method = fsync # the default is the first option + # supported by the operating system: + # open_datasync + # fdatasync (default on Linux and FreeBSD) + # fsync + # fsync_writethrough + # open_sync +#full_page_writes = on # recover from partial page writes +#wal_log_hints = off # also do full page writes of non-critical updates + # (change requires restart) +#wal_compression = off # enables compression of full-page writes; + # off, pglz, lz4, zstd, or on +#wal_init_zero = on # zero-fill new WAL files +#wal_recycle = on # recycle WAL files +#wal_buffers = -1 # min 32kB, -1 sets based on shared_buffers + # (change requires restart) +#wal_writer_delay = 200ms # 1-10000 milliseconds +#wal_writer_flush_after = 1MB # measured in pages, 0 disables +#wal_skip_threshold = 2MB + +#commit_delay = 0 # range 0-100000, in microseconds +#commit_siblings = 5 # range 1-1000 + +# - Checkpoints - + +#checkpoint_timeout = 5min # range 30s-1d +#checkpoint_completion_target = 0.9 # checkpoint target duration, 0.0 - 1.0 +#checkpoint_flush_after = 256kB # measured in pages, 0 disables +#checkpoint_warning = 30s # 0 disables +max_wal_size = 1GB +min_wal_size = 80MB + +# - Prefetching during recovery - + +#recovery_prefetch = try # prefetch pages referenced in the WAL? +#wal_decode_buffer_size = 512kB # lookahead window used for prefetching + # (change requires restart) + +# - Archiving - + +#archive_mode = off # enables archiving; off, on, or always + # (change requires restart) +#archive_library = '' # library to use to archive a logfile segment + # (empty string indicates archive_command should + # be used) +#archive_command = '' # command to use to archive a logfile segment + # placeholders: %p = path of file to archive + # %f = file name only + # e.g. 'test ! -f /mnt/server/archivedir/%f && cp %p /mnt/server/archivedir/%f' +#archive_timeout = 0 # force a logfile segment switch after this + # number of seconds; 0 disables + +# - Archive Recovery - + +# These are only used in recovery mode. +{% if use_separate_receivewal_service %} +restore_command = 'cp {{ wal_destination }}/%f %p' # command to use to restore an archived logfile segment + # placeholders: %p = path of file to restore + # %f = file name only + # e.g. 'cp /mnt/server/archivedir/%f %p' + # (change requires restart) +archive_cleanup_command = 'pg_archivecleanup {{ wal_destination }} %r' # command to execute at every restartpoint +{% else %} +#restore_command ='' # command to use to restore an archived logfile segment + # placeholders: %p = path of file to restore + # %f = file name only + # e.g. 'cp /mnt/server/archivedir/%f %p' + # (change requires restart) +#archive_cleanup_command = '' # command to execute at every restartpoint +{% endif %} +#recovery_end_command = '' # command to execute at completion of recovery + +# - Recovery Target - + +# Set these only when performing a targeted recovery. + +#recovery_target = '' # 'immediate' to end recovery as soon as a + # consistent state is reached + # (change requires restart) +#recovery_target_name = '' # the named restore point to which recovery will proceed + # (change requires restart) +{% if recovery_mode and not latest %} +recovery_target_time = '{{ recovery_target_time }}' # the time stamp up to which recovery will proceed +{% else %} +#recovery_target_time = '' # the time stamp up to which recovery will proceed +{% endif %} + # (change requires restart) +#recovery_target_xid = '' # the transaction ID up to which recovery will proceed + # (change requires restart) +#recovery_target_lsn = '' # the WAL LSN up to which recovery will proceed + # (change requires restart) +#recovery_target_inclusive = on # Specifies whether to stop: + # just after the specified recovery target (on) + # just before the recovery target (off) + # (change requires restart) +#recovery_target_timeline = 'latest' # 'current', 'latest', or timeline ID + # (change requires restart) +#recovery_target_action = 'pause' # 'pause', 'promote', 'shutdown' + # (change requires restart) + + +#------------------------------------------------------------------------------ +# REPLICATION +#------------------------------------------------------------------------------ + +# - Sending Servers - + +# Set these on the primary and on any standby that will send replication data. + +#max_wal_senders = 10 # max number of walsender processes + # (change requires restart) +#max_replication_slots = 10 # max number of replication slots + # (change requires restart) +#wal_keep_size = 0 # in megabytes; 0 disables +#max_slot_wal_keep_size = -1 # in megabytes; -1 disables +#wal_sender_timeout = 60s # in milliseconds; 0 disables +#track_commit_timestamp = off # collect timestamp of transaction commit + # (change requires restart) + +# - Primary Server - + +# These settings are ignored on a standby server. + +#synchronous_standby_names = '' # standby servers that provide sync rep + # method to choose sync standbys, number of sync standbys, + # and comma-separated list of application_name + # from standby(s); '*' = all +#vacuum_defer_cleanup_age = 0 # number of xacts by which cleanup is delayed + +# - Standby Servers - + +# These settings are ignored on a primary server. + +{% if use_separate_receivewal_service %} +#primary_conninfo = '' # connection string to sending server +#primary_slot_name = '' # replication slot on sending server +{% else %} +primary_conninfo = 'host={{ host }} port={{ port }} user={{ username }} replication=1 password={{ password }}' # connection string to sending server +primary_slot_name = '{{ slot }}' # replication slot on sending server +{% endif %} + +#promote_trigger_file = '' # file name whose presence ends recovery +hot_standby = {{ standby_mode }} # "off" disallows queries during recovery + # (change requires restart) +#max_standby_archive_delay = 30s # max delay before canceling queries + # when reading WAL from archive; + # -1 allows indefinite delay +#max_standby_streaming_delay = 30s # max delay before canceling queries + # when reading streaming WAL; + # -1 allows indefinite delay +#wal_receiver_create_temp_slot = off # create temp slot if primary_slot_name + # is not set +#wal_receiver_status_interval = 10s # send replies at least this often + # 0 disables +#hot_standby_feedback = off # send info from standby to prevent + # query conflicts +#wal_receiver_timeout = 60s # time that receiver waits for + # communication from primary + # in milliseconds; 0 disables +#wal_retrieve_retry_interval = 5s # time to wait before retrying to + # retrieve WAL after a failed attempt +{% if (recovery_mode or delay == 0) %} +#recovery_min_apply_delay = '' +{% else %} +recovery_min_apply_delay = {{ delay }}min # minimum delay for applying changes during recovery +{% endif %} + +# - Subscribers - + +# These settings are ignored on a publisher. + +#max_logical_replication_workers = 4 # taken from max_worker_processes + # (change requires restart) +#max_sync_workers_per_subscription = 2 # taken from max_logical_replication_workers + + +#------------------------------------------------------------------------------ +# QUERY TUNING +#------------------------------------------------------------------------------ + +# - Planner Method Configuration - + +#enable_async_append = on +#enable_bitmapscan = on +#enable_gathermerge = on +#enable_hashagg = on +#enable_hashjoin = on +#enable_incremental_sort = on +#enable_indexscan = on +#enable_indexonlyscan = on +#enable_material = on +#enable_memoize = on +#enable_mergejoin = on +#enable_nestloop = on +#enable_parallel_append = on +#enable_parallel_hash = on +#enable_partition_pruning = on +#enable_partitionwise_join = off +#enable_partitionwise_aggregate = off +#enable_seqscan = on +#enable_sort = on +#enable_tidscan = on + +# - Planner Cost Constants - + +#seq_page_cost = 1.0 # measured on an arbitrary scale +#random_page_cost = 4.0 # same scale as above +#cpu_tuple_cost = 0.01 # same scale as above +#cpu_index_tuple_cost = 0.005 # same scale as above +#cpu_operator_cost = 0.0025 # same scale as above +#parallel_setup_cost = 1000.0 # same scale as above +#parallel_tuple_cost = 0.1 # same scale as above +#min_parallel_table_scan_size = 8MB +#min_parallel_index_scan_size = 512kB +#effective_cache_size = 4GB + +#jit_above_cost = 100000 # perform JIT compilation if available + # and query more expensive than this; + # -1 disables +#jit_inline_above_cost = 500000 # inline small functions if query is + # more expensive than this; -1 disables +#jit_optimize_above_cost = 500000 # use expensive JIT optimizations if + # query is more expensive than this; + # -1 disables + +# - Genetic Query Optimizer - + +#geqo = on +#geqo_threshold = 12 +#geqo_effort = 5 # range 1-10 +#geqo_pool_size = 0 # selects default based on effort +#geqo_generations = 0 # selects default based on effort +#geqo_selection_bias = 2.0 # range 1.5-2.0 +#geqo_seed = 0.0 # range 0.0-1.0 + +# - Other Planner Options - + +#default_statistics_target = 100 # range 1-10000 +#constraint_exclusion = partition # on, off, or partition +#cursor_tuple_fraction = 0.1 # range 0.0-1.0 +#from_collapse_limit = 8 +#jit = on # allow JIT compilation +#join_collapse_limit = 8 # 1 disables collapsing of explicit + # JOIN clauses +#plan_cache_mode = auto # auto, force_generic_plan or + # force_custom_plan +#recursive_worktable_factor = 10.0 # range 0.001-1000000 + + +#------------------------------------------------------------------------------ +# REPORTING AND LOGGING +#------------------------------------------------------------------------------ + +# - Where to Log - + +#log_destination = 'stderr' # Valid values are combinations of + # stderr, csvlog, jsonlog, syslog, and + # eventlog, depending on platform. + # csvlog and jsonlog require + # logging_collector to be on. + +# This is used when logging to stderr: +#logging_collector = off # Enable capturing of stderr, jsonlog, + # and csvlog into log files. Required + # to be on for csvlogs and jsonlogs. + # (change requires restart) + +# These are only used if logging_collector is on: +#log_directory = 'log' # directory where log files are written, + # can be absolute or relative to PGDATA +#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log' # log file name pattern, + # can include strftime() escapes +#log_file_mode = 0600 # creation mode for log files, + # begin with 0 to use octal notation +#log_rotation_age = 1d # Automatic rotation of logfiles will + # happen after that time. 0 disables. +#log_rotation_size = 10MB # Automatic rotation of logfiles will + # happen after that much log output. + # 0 disables. +#log_truncate_on_rotation = off # If on, an existing log file with the + # same name as the new log file will be + # truncated rather than appended to. + # But such truncation only occurs on + # time-driven rotation, not on restarts + # or size-driven rotation. Default is + # off, meaning append to existing files + # in all cases. + +# These are relevant when logging to syslog: +#syslog_facility = 'LOCAL0' +#syslog_ident = 'postgres' +#syslog_sequence_numbers = on +#syslog_split_messages = on + +# This is only relevant when logging to eventlog (Windows): +# (change requires restart) +#event_source = 'PostgreSQL' + +# - When to Log - + +#log_min_messages = warning # values in order of decreasing detail: + # debug5 + # debug4 + # debug3 + # debug2 + # debug1 + # info + # notice + # warning + # error + # log + # fatal + # panic + +#log_min_error_statement = error # values in order of decreasing detail: + # debug5 + # debug4 + # debug3 + # debug2 + # debug1 + # info + # notice + # warning + # error + # log + # fatal + # panic (effectively off) + +#log_min_duration_statement = -1 # -1 is disabled, 0 logs all statements + # and their durations, > 0 logs only + # statements running at least this number + # of milliseconds + +#log_min_duration_sample = -1 # -1 is disabled, 0 logs a sample of statements + # and their durations, > 0 logs only a sample of + # statements running at least this number + # of milliseconds; + # sample fraction is determined by log_statement_sample_rate + +#log_statement_sample_rate = 1.0 # fraction of logged statements exceeding + # log_min_duration_sample to be logged; + # 1.0 logs all such statements, 0.0 never logs + + +#log_transaction_sample_rate = 0.0 # fraction of transactions whose statements + # are logged regardless of their duration; 1.0 logs all + # statements from all transactions, 0.0 never logs + +#log_startup_progress_interval = 10s # Time between progress updates for + # long-running startup operations. + # 0 disables the feature, > 0 indicates + # the interval in milliseconds. + +# - What to Log - + +#debug_print_parse = off +#debug_print_rewritten = off +#debug_print_plan = off +#debug_pretty_print = on +#log_autovacuum_min_duration = 10min # log autovacuum activity; + # -1 disables, 0 logs all actions and + # their durations, > 0 logs only + # actions running at least this number + # of milliseconds. +#log_checkpoints = on +#log_connections = off +#log_disconnections = off +#log_duration = off +#log_error_verbosity = default # terse, default, or verbose messages +#log_hostname = off +log_line_prefix = '%m [%p] %q%u@%d ' # special values: + # %a = application name + # %u = user name + # %d = database name + # %r = remote host and port + # %h = remote host + # %b = backend type + # %p = process ID + # %P = process ID of parallel group leader + # %t = timestamp without milliseconds + # %m = timestamp with milliseconds + # %n = timestamp with milliseconds (as a Unix epoch) + # %Q = query ID (0 if none or not computed) + # %i = command tag + # %e = SQL state + # %c = session ID + # %l = session line number + # %s = session start timestamp + # %v = virtual transaction ID + # %x = transaction ID (0 if none) + # %q = stop here in non-session + # processes + # %% = '%' + # e.g. '<%u%%%d> ' +#log_lock_waits = off # log lock waits >= deadlock_timeout +#log_recovery_conflict_waits = off # log standby recovery conflict waits + # >= deadlock_timeout +#log_parameter_max_length = -1 # when logging statements, limit logged + # bind-parameter values to N bytes; + # -1 means print in full, 0 disables +#log_parameter_max_length_on_error = 0 # when logging an error, limit logged + # bind-parameter values to N bytes; + # -1 means print in full, 0 disables +#log_statement = 'none' # none, ddl, mod, all +#log_replication_commands = off +#log_temp_files = -1 # log temporary files equal or larger + # than the specified size in kilobytes; + # -1 disables, 0 logs all temp files +log_timezone = 'Asia/Tehran' + +#------------------------------------------------------------------------------ +# PROCESS TITLE +#------------------------------------------------------------------------------ + +cluster_name = '14/{{ name }}' # added to process titles if nonempty + # (change requires restart) +#update_process_title = on + + +#------------------------------------------------------------------------------ +# STATISTICS +#------------------------------------------------------------------------------ + +# - Cumulative Query and Index Statistics - + +#track_activities = on +#track_activity_query_size = 1024 # (change requires restart) +#track_counts = on +#track_io_timing = off +#track_wal_io_timing = off +#track_functions = none # none, pl, all +#track_activity_query_size = 1024 # (change requires restart) + + +# - Monitoring - + +#compute_query_id = auto +#log_statement_stats = off +#log_parser_stats = off +#log_planner_stats = off +#log_executor_stats = off + + +#------------------------------------------------------------------------------ +# AUTOVACUUM +#------------------------------------------------------------------------------ + +#autovacuum = on # Enable autovacuum subprocess? 'on' + # requires track_counts to also be on. +#autovacuum_max_workers = 3 # max number of autovacuum subprocesses + # (change requires restart) +#autovacuum_naptime = 1min # time between autovacuum runs +#autovacuum_vacuum_threshold = 50 # min number of row updates before + # vacuum +#autovacuum_vacuum_insert_threshold = 1000 # min number of row inserts + # before vacuum; -1 disables insert + # vacuums +#autovacuum_analyze_threshold = 50 # min number of row updates before + # analyze +#autovacuum_vacuum_scale_factor = 0.2 # fraction of table size before vacuum +#autovacuum_vacuum_insert_scale_factor = 0.2 # fraction of inserts over table + # size before insert vacuum +#autovacuum_analyze_scale_factor = 0.1 # fraction of table size before analyze +#autovacuum_freeze_max_age = 200000000 # maximum XID age before forced vacuum + # (change requires restart) +#autovacuum_multixact_freeze_max_age = 400000000 # maximum multixact age + # before forced vacuum + # (change requires restart) +#autovacuum_vacuum_cost_delay = 2ms # default vacuum cost delay for + # autovacuum, in milliseconds; + # -1 means use vacuum_cost_delay +#autovacuum_vacuum_cost_limit = -1 # default vacuum cost limit for + # autovacuum, -1 means use + # vacuum_cost_limit + + +#------------------------------------------------------------------------------ +# CLIENT CONNECTION DEFAULTS +#------------------------------------------------------------------------------ + +# - Statement Behavior - + +#client_min_messages = notice # values in order of decreasing detail: + # debug5 + # debug4 + # debug3 + # debug2 + # debug1 + # log + # notice + # warning + # error +#search_path = '"$user", public' # schema names +#row_security = on +#default_table_access_method = 'heap' +#default_tablespace = '' # a tablespace name, '' uses the default +#default_toast_compression = 'pglz' # 'pglz' or 'lz4' +#temp_tablespaces = '' # a list of tablespace names, '' uses + # only default tablespace +#check_function_bodies = on +#default_transaction_isolation = 'read committed' +#default_transaction_read_only = off +#default_transaction_deferrable = off +#session_replication_role = 'origin' +#statement_timeout = 0 # in milliseconds, 0 is disabled +#lock_timeout = 0 # in milliseconds, 0 is disabled +#idle_in_transaction_session_timeout = 0 # in milliseconds, 0 is disabled +#idle_session_timeout = 0 # in milliseconds, 0 is disabled +#vacuum_freeze_table_age = 150000000 +#vacuum_freeze_min_age = 50000000 +#vacuum_failsafe_age = 1600000000 +#vacuum_multixact_freeze_table_age = 150000000 +#vacuum_multixact_freeze_min_age = 5000000 +#vacuum_multixact_failsafe_age = 1600000000 +#bytea_output = 'hex' # hex, escape +#xmlbinary = 'base64' +#xmloption = 'content' +#gin_pending_list_limit = 4MB + +# - Locale and Formatting - + +datestyle = 'iso, mdy' +#intervalstyle = 'postgres' +timezone = 'Asia/Tehran' +#timezone_abbreviations = 'Default' # Select the set of available time zone + # abbreviations. Currently, there are + # Default + # Australia (historical usage) + # India + # You can create your own file in + # share/timezonesets/. +#extra_float_digits = 1 # min -15, max 3; any value >0 actually + # selects precise output mode +#client_encoding = sql_ascii # actually, defaults to database + # encoding + +# These settings are initialized by initdb, but they can be changed. +lc_messages = 'en_US.UTF-8' # locale for system error message + # strings +lc_monetary = 'en_US.UTF-8' # locale for monetary formatting +lc_numeric = 'en_US.UTF-8' # locale for number formatting +lc_time = 'en_US.UTF-8' # locale for time formatting + +# default configuration for text search +default_text_search_config = 'pg_catalog.english' + +# - Shared Library Preloading - + +#local_preload_libraries = '' +#session_preload_libraries = '' +#shared_preload_libraries = '' # (change requires restart) +#jit_provider = 'llvmjit' # JIT library to use + +# - Other Defaults - + +#dynamic_library_path = '$libdir' +#extension_destdir = '' # prepend path when loading extensions + # and shared objects (added by Debian) +#gin_fuzzy_search_limit = 0 + + +#------------------------------------------------------------------------------ +# LOCK MANAGEMENT +#------------------------------------------------------------------------------ + +#deadlock_timeout = 1s +#max_locks_per_transaction = 64 # min 10 + # (change requires restart) +#max_pred_locks_per_transaction = 64 # min 10 + # (change requires restart) +#max_pred_locks_per_relation = -2 # negative values mean + # (max_pred_locks_per_transaction + # / -max_pred_locks_per_relation) - 1 +#max_pred_locks_per_page = 2 # min 0 + + +#------------------------------------------------------------------------------ +# VERSION AND PLATFORM COMPATIBILITY +#------------------------------------------------------------------------------ + +# - Previous PostgreSQL Versions - + +#array_nulls = on +#backslash_quote = safe_encoding # on, off, or safe_encoding +#escape_string_warning = on +#lo_compat_privileges = off +#quote_all_identifiers = off +#standard_conforming_strings = on +#synchronize_seqscans = on + +# - Other Platforms and Clients - + +#transform_null_equals = off + + +#------------------------------------------------------------------------------ +# ERROR HANDLING +#------------------------------------------------------------------------------ + +#exit_on_error = off # terminate session on any error? +#restart_after_crash = on # reinitialize after backend crash? +#data_sync_retry = off # retry or panic on failure to fsync + # data? + # (change requires restart) +#recovery_init_sync_method = fsync # fsync, syncfs (Linux 5.8+) + + +#------------------------------------------------------------------------------ +# CONFIG FILE INCLUDES +#------------------------------------------------------------------------------ + +# These options allow settings to be loaded from files other than the +# default postgresql.conf. Note that these are directives, not variable +# assignments, so they can usefully be given more than once. + +include_dir = 'conf.d' # include files ending in '.conf' from + # a directory, e.g., 'conf.d' +#include_if_exists = '...' # include file only if it exists +#include = '...' # include file + + +#------------------------------------------------------------------------------ +# CUSTOMIZED OPTIONS +#------------------------------------------------------------------------------ + +# Add settings for extensions here diff --git a/pgkit/application/templates/15-recovery.conf b/pgkit/application/templates/15-recovery.conf new file mode 100644 index 0000000..80451dc --- /dev/null +++ b/pgkit/application/templates/15-recovery.conf @@ -0,0 +1,837 @@ +# ----------------------------- +# PostgreSQL configuration file +# ----------------------------- +# +# This file consists of lines of the form: +# +# name = value +# +# (The "=" is optional.) Whitespace may be used. Comments are introduced with +# "#" anywhere on a line. The complete list of parameter names and allowed +# values can be found in the PostgreSQL documentation. +# +# The commented-out settings shown in this file represent the default values. +# Re-commenting a setting is NOT sufficient to revert it to the default value; +# you need to reload the server. +# +# This file is read on server startup and when the server receives a SIGHUP +# signal. If you edit the file on a running system, you have to SIGHUP the +# server for the changes to take effect, run "pg_ctl reload", or execute +# "SELECT pg_reload_conf()". Some parameters, which are marked below, +# require a server shutdown and restart to take effect. +# +# Any parameter can also be given as a command-line option to the server, e.g., +# "postgres -c log_connections=on". Some parameters can be changed at run time +# with the "SET" SQL command. +# +# Memory units: B = bytes Time units: us = microseconds +# kB = kilobytes ms = milliseconds +# MB = megabytes s = seconds +# GB = gigabytes min = minutes +# TB = terabytes h = hours +# d = days + + +#------------------------------------------------------------------------------ +# FILE LOCATIONS +#------------------------------------------------------------------------------ + +# The default values of these variables are driven from the -D command-line +# option or PGDATA environment variable, represented here as ConfigDir. + +data_directory = '/var/lib/postgresql/15/{{ name }}' # use data in another directory + # (change requires restart) +hba_file = '/etc/postgresql/15/{{ name }}/pg_hba.conf' # host-based authentication file + # (change requires restart) +ident_file = '/etc/postgresql/15/{{ name }}/pg_ident.conf' # ident configuration file + # (change requires restart) + +# If external_pid_file is not explicitly set, no extra PID file is written. +external_pid_file = '/var/run/postgresql/15-{{ name }}.pid' # write an extra PID file + # (change requires restart) + + +#------------------------------------------------------------------------------ +# CONNECTIONS AND AUTHENTICATION +#------------------------------------------------------------------------------ + +# - Connection Settings - + +listen_addresses = '*' # what IP address(es) to listen on; + # comma-separated list of addresses; + # defaults to 'localhost'; use '*' for all + # (change requires restart) +port = {{ standby_port }} # (change requires restart) +max_connections = {{ max_connections }} # (change requires restart) +#superuser_reserved_connections = 3 # (change requires restart) +unix_socket_directories = '/var/run/postgresql' # comma-separated list of directories + # (change requires restart) +#unix_socket_group = '' # (change requires restart) +#unix_socket_permissions = 0777 # begin with 0 to use octal notation + # (change requires restart) +#bonjour = off # advertise server via Bonjour + # (change requires restart) +#bonjour_name = '' # defaults to the computer name + # (change requires restart) + +# - TCP settings - +# see "man tcp" for details + +#tcp_keepalives_idle = 0 # TCP_KEEPIDLE, in seconds; + # 0 selects the system default +#tcp_keepalives_interval = 0 # TCP_KEEPINTVL, in seconds; + # 0 selects the system default +#tcp_keepalives_count = 0 # TCP_KEEPCNT; + # 0 selects the system default +#tcp_user_timeout = 0 # TCP_USER_TIMEOUT, in milliseconds; + # 0 selects the system default + +#client_connection_check_interval = 0 # time between checks for client + # disconnection while running queries; + # 0 for never + +# - Authentication - + +#authentication_timeout = 1min # 1s-600s +#password_encryption = scram-sha-256 # scram-sha-256 or md5 +#db_user_namespace = off + +# GSSAPI using Kerberos +#krb_server_keyfile = 'FILE:${sysconfdir}/krb5.keytab' +#krb_caseins_users = off + +# - SSL - + +ssl = on +#ssl_ca_file = '' +ssl_cert_file = '/etc/ssl/certs/ssl-cert-snakeoil.pem' +#ssl_crl_file = '' +#ssl_crl_dir = '' +ssl_key_file = '/etc/ssl/private/ssl-cert-snakeoil.key' +#ssl_ciphers = 'HIGH:MEDIUM:+3DES:!aNULL' # allowed SSL ciphers +#ssl_prefer_server_ciphers = on +#ssl_ecdh_curve = 'prime256v1' +#ssl_min_protocol_version = 'TLSv1.2' +#ssl_max_protocol_version = '' +#ssl_dh_params_file = '' +#ssl_passphrase_command = '' +#ssl_passphrase_command_supports_reload = off + + +#------------------------------------------------------------------------------ +# RESOURCE USAGE (except WAL) +#------------------------------------------------------------------------------ + +# - Memory - + +shared_buffers = 128MB # min 128kB + # (change requires restart) +#huge_pages = try # on, off, or try + # (change requires restart) +#huge_page_size = 0 # zero for system default + # (change requires restart) +#temp_buffers = 8MB # min 800kB +#max_prepared_transactions = 0 # zero disables the feature + # (change requires restart) +# Caution: it is not advisable to set max_prepared_transactions nonzero unless +# you actively intend to use prepared transactions. +#work_mem = 4MB # min 64kB +#hash_mem_multiplier = 2.0 # 1-1000.0 multiplier on hash table work_mem +#maintenance_work_mem = 64MB # min 1MB +#autovacuum_work_mem = -1 # min 1MB, or -1 to use maintenance_work_mem +#logical_decoding_work_mem = 64MB # min 64kB +#max_stack_depth = 2MB # min 100kB +#shared_memory_type = mmap # the default is the first option + # supported by the operating system: + # mmap + # sysv + # windows + # (change requires restart) +dynamic_shared_memory_type = posix # the default is usually the first option + # supported by the operating system: + # posix + # sysv + # windows + # mmap + # (change requires restart) +#min_dynamic_shared_memory = 0MB # (change requires restart) + +# - Disk - + +#temp_file_limit = -1 # limits per-process temp file space + # in kilobytes, or -1 for no limit + +# - Kernel Resources - + +#max_files_per_process = 1000 # min 64 + # (change requires restart) + +# - Cost-Based Vacuum Delay - + +#vacuum_cost_delay = 0 # 0-100 milliseconds (0 disables) +#vacuum_cost_page_hit = 1 # 0-10000 credits +#vacuum_cost_page_miss = 2 # 0-10000 credits +#vacuum_cost_page_dirty = 20 # 0-10000 credits +#vacuum_cost_limit = 200 # 1-10000 credits + +# - Background Writer - + +#bgwriter_delay = 200ms # 10-10000ms between rounds +#bgwriter_lru_maxpages = 100 # max buffers written/round, 0 disables +#bgwriter_lru_multiplier = 2.0 # 0-10.0 multiplier on buffers scanned/round +#bgwriter_flush_after = 512kB # measured in pages, 0 disables + +# - Asynchronous Behavior - + +#backend_flush_after = 0 # measured in pages, 0 disables +#effective_io_concurrency = 1 # 1-1000; 0 disables prefetching +#maintenance_io_concurrency = 10 # 1-1000; 0 disables prefetching +max_worker_processes = {{ max_worker_processes }} # (change requires restart) +#max_parallel_workers_per_gather = 2 # taken from max_parallel_workers +#max_parallel_maintenance_workers = 2 # taken from max_parallel_workers +#max_parallel_workers = 8 # maximum number of max_worker_processes that + # can be used in parallel operations +#parallel_leader_participation = on +#old_snapshot_threshold = -1 # 1min-60d; -1 disables; 0 is immediate + # (change requires restart) + + +#------------------------------------------------------------------------------ +# WRITE-AHEAD LOG +#------------------------------------------------------------------------------ + +# - Settings - + +#wal_level = replica # minimal, replica, or logical + # (change requires restart) +#fsync = on # flush data to disk for crash safety + # (turning this off can cause + # unrecoverable data corruption) +#synchronous_commit = on # synchronization level; + # off, local, remote_write, remote_apply, or on +#wal_sync_method = fsync # the default is the first option + # supported by the operating system: + # open_datasync + # fdatasync (default on Linux and FreeBSD) + # fsync + # fsync_writethrough + # open_sync +#full_page_writes = on # recover from partial page writes +#wal_log_hints = off # also do full page writes of non-critical updates + # (change requires restart) +#wal_compression = off # enables compression of full-page writes; + # off, pglz, lz4, zstd, or on +#wal_init_zero = on # zero-fill new WAL files +#wal_recycle = on # recycle WAL files +#wal_buffers = -1 # min 32kB, -1 sets based on shared_buffers + # (change requires restart) +#wal_writer_delay = 200ms # 1-10000 milliseconds +#wal_writer_flush_after = 1MB # measured in pages, 0 disables +#wal_skip_threshold = 2MB + +#commit_delay = 0 # range 0-100000, in microseconds +#commit_siblings = 5 # range 1-1000 + +# - Checkpoints - + +#checkpoint_timeout = 5min # range 30s-1d +#checkpoint_completion_target = 0.9 # checkpoint target duration, 0.0 - 1.0 +#checkpoint_flush_after = 256kB # measured in pages, 0 disables +#checkpoint_warning = 30s # 0 disables +max_wal_size = 1GB +min_wal_size = 80MB + +# - Prefetching during recovery - + +#recovery_prefetch = try # prefetch pages referenced in the WAL? +#wal_decode_buffer_size = 512kB # lookahead window used for prefetching + # (change requires restart) + +# - Archiving - + +#archive_mode = off # enables archiving; off, on, or always + # (change requires restart) +#archive_library = '' # library to use to archive a logfile segment + # (empty string indicates archive_command should + # be used) +#archive_command = '' # command to use to archive a logfile segment + # placeholders: %p = path of file to archive + # %f = file name only + # e.g. 'test ! -f /mnt/server/archivedir/%f && cp %p /mnt/server/archivedir/%f' +#archive_timeout = 0 # force a logfile segment switch after this + # number of seconds; 0 disables + +# - Archive Recovery - + +# These are only used in recovery mode. +{% if use_separate_receivewal_service %} +restore_command = 'cp {{ wal_destination }}/%f %p' # command to use to restore an archived logfile segment + # placeholders: %p = path of file to restore + # %f = file name only + # e.g. 'cp /mnt/server/archivedir/%f %p' + # (change requires restart) +archive_cleanup_command = 'pg_archivecleanup {{ wal_destination }} %r' # command to execute at every restartpoint +{% else %} +#restore_command ='' # command to use to restore an archived logfile segment + # placeholders: %p = path of file to restore + # %f = file name only + # e.g. 'cp /mnt/server/archivedir/%f %p' + # (change requires restart) +#archive_cleanup_command = '' # command to execute at every restartpoint +{% endif %} +#recovery_end_command = '' # command to execute at completion of recovery + +# - Recovery Target - + +# Set these only when performing a targeted recovery. + +#recovery_target = '' # 'immediate' to end recovery as soon as a + # consistent state is reached + # (change requires restart) +#recovery_target_name = '' # the named restore point to which recovery will proceed + # (change requires restart) +{% if recovery_mode and not latest %} +recovery_target_time = '{{ recovery_target_time }}' # the time stamp up to which recovery will proceed +{% else %} +#recovery_target_time = '' # the time stamp up to which recovery will proceed +{% endif %} + # (change requires restart) +#recovery_target_xid = '' # the transaction ID up to which recovery will proceed + # (change requires restart) +#recovery_target_lsn = '' # the WAL LSN up to which recovery will proceed + # (change requires restart) +#recovery_target_inclusive = on # Specifies whether to stop: + # just after the specified recovery target (on) + # just before the recovery target (off) + # (change requires restart) +#recovery_target_timeline = 'latest' # 'current', 'latest', or timeline ID + # (change requires restart) +#recovery_target_action = 'pause' # 'pause', 'promote', 'shutdown' + # (change requires restart) + + +#------------------------------------------------------------------------------ +# REPLICATION +#------------------------------------------------------------------------------ + +# - Sending Servers - + +# Set these on the primary and on any standby that will send replication data. + +#max_wal_senders = 10 # max number of walsender processes + # (change requires restart) +#max_replication_slots = 10 # max number of replication slots + # (change requires restart) +#wal_keep_size = 0 # in megabytes; 0 disables +#max_slot_wal_keep_size = -1 # in megabytes; -1 disables +#wal_sender_timeout = 60s # in milliseconds; 0 disables +#track_commit_timestamp = off # collect timestamp of transaction commit + # (change requires restart) + +# - Primary Server - + +# These settings are ignored on a standby server. + +#synchronous_standby_names = '' # standby servers that provide sync rep + # method to choose sync standbys, number of sync standbys, + # and comma-separated list of application_name + # from standby(s); '*' = all +#vacuum_defer_cleanup_age = 0 # number of xacts by which cleanup is delayed + +# - Standby Servers - + +# These settings are ignored on a primary server. + +{% if use_separate_receivewal_service %} +#primary_conninfo = '' # connection string to sending server +#primary_slot_name = '' # replication slot on sending server +{% else %} +primary_conninfo = 'host={{ host }} port={{ port }} user={{ username }} replication=1 password={{ password }}' # connection string to sending server +primary_slot_name = '{{ slot }}' # replication slot on sending server +{% endif %} + +#promote_trigger_file = '' # file name whose presence ends recovery +hot_standby = {{ standby_mode }} # "off" disallows queries during recovery + # (change requires restart) +#max_standby_archive_delay = 30s # max delay before canceling queries + # when reading WAL from archive; + # -1 allows indefinite delay +#max_standby_streaming_delay = 30s # max delay before canceling queries + # when reading streaming WAL; + # -1 allows indefinite delay +#wal_receiver_create_temp_slot = off # create temp slot if primary_slot_name + # is not set +#wal_receiver_status_interval = 10s # send replies at least this often + # 0 disables +#hot_standby_feedback = off # send info from standby to prevent + # query conflicts +#wal_receiver_timeout = 60s # time that receiver waits for + # communication from primary + # in milliseconds; 0 disables +#wal_retrieve_retry_interval = 5s # time to wait before retrying to + # retrieve WAL after a failed attempt +{% if (recovery_mode or delay == 0) %} +#recovery_min_apply_delay = '' +{% else %} +recovery_min_apply_delay = {{ delay }}min # minimum delay for applying changes during recovery +{% endif %} + +# - Subscribers - + +# These settings are ignored on a publisher. + +#max_logical_replication_workers = 4 # taken from max_worker_processes + # (change requires restart) +#max_sync_workers_per_subscription = 2 # taken from max_logical_replication_workers + + +#------------------------------------------------------------------------------ +# QUERY TUNING +#------------------------------------------------------------------------------ + +# - Planner Method Configuration - + +#enable_async_append = on +#enable_bitmapscan = on +#enable_gathermerge = on +#enable_hashagg = on +#enable_hashjoin = on +#enable_incremental_sort = on +#enable_indexscan = on +#enable_indexonlyscan = on +#enable_material = on +#enable_memoize = on +#enable_mergejoin = on +#enable_nestloop = on +#enable_parallel_append = on +#enable_parallel_hash = on +#enable_partition_pruning = on +#enable_partitionwise_join = off +#enable_partitionwise_aggregate = off +#enable_seqscan = on +#enable_sort = on +#enable_tidscan = on + +# - Planner Cost Constants - + +#seq_page_cost = 1.0 # measured on an arbitrary scale +#random_page_cost = 4.0 # same scale as above +#cpu_tuple_cost = 0.01 # same scale as above +#cpu_index_tuple_cost = 0.005 # same scale as above +#cpu_operator_cost = 0.0025 # same scale as above +#parallel_setup_cost = 1000.0 # same scale as above +#parallel_tuple_cost = 0.1 # same scale as above +#min_parallel_table_scan_size = 8MB +#min_parallel_index_scan_size = 512kB +#effective_cache_size = 4GB + +#jit_above_cost = 100000 # perform JIT compilation if available + # and query more expensive than this; + # -1 disables +#jit_inline_above_cost = 500000 # inline small functions if query is + # more expensive than this; -1 disables +#jit_optimize_above_cost = 500000 # use expensive JIT optimizations if + # query is more expensive than this; + # -1 disables + +# - Genetic Query Optimizer - + +#geqo = on +#geqo_threshold = 12 +#geqo_effort = 5 # range 1-10 +#geqo_pool_size = 0 # selects default based on effort +#geqo_generations = 0 # selects default based on effort +#geqo_selection_bias = 2.0 # range 1.5-2.0 +#geqo_seed = 0.0 # range 0.0-1.0 + +# - Other Planner Options - + +#default_statistics_target = 100 # range 1-10000 +#constraint_exclusion = partition # on, off, or partition +#cursor_tuple_fraction = 0.1 # range 0.0-1.0 +#from_collapse_limit = 8 +#jit = on # allow JIT compilation +#join_collapse_limit = 8 # 1 disables collapsing of explicit + # JOIN clauses +#plan_cache_mode = auto # auto, force_generic_plan or + # force_custom_plan +#recursive_worktable_factor = 10.0 # range 0.001-1000000 + + +#------------------------------------------------------------------------------ +# REPORTING AND LOGGING +#------------------------------------------------------------------------------ + +# - Where to Log - + +#log_destination = 'stderr' # Valid values are combinations of + # stderr, csvlog, jsonlog, syslog, and + # eventlog, depending on platform. + # csvlog and jsonlog require + # logging_collector to be on. + +# This is used when logging to stderr: +#logging_collector = off # Enable capturing of stderr, jsonlog, + # and csvlog into log files. Required + # to be on for csvlogs and jsonlogs. + # (change requires restart) + +# These are only used if logging_collector is on: +#log_directory = 'log' # directory where log files are written, + # can be absolute or relative to PGDATA +#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log' # log file name pattern, + # can include strftime() escapes +#log_file_mode = 0600 # creation mode for log files, + # begin with 0 to use octal notation +#log_rotation_age = 1d # Automatic rotation of logfiles will + # happen after that time. 0 disables. +#log_rotation_size = 10MB # Automatic rotation of logfiles will + # happen after that much log output. + # 0 disables. +#log_truncate_on_rotation = off # If on, an existing log file with the + # same name as the new log file will be + # truncated rather than appended to. + # But such truncation only occurs on + # time-driven rotation, not on restarts + # or size-driven rotation. Default is + # off, meaning append to existing files + # in all cases. + +# These are relevant when logging to syslog: +#syslog_facility = 'LOCAL0' +#syslog_ident = 'postgres' +#syslog_sequence_numbers = on +#syslog_split_messages = on + +# This is only relevant when logging to eventlog (Windows): +# (change requires restart) +#event_source = 'PostgreSQL' + +# - When to Log - + +#log_min_messages = warning # values in order of decreasing detail: + # debug5 + # debug4 + # debug3 + # debug2 + # debug1 + # info + # notice + # warning + # error + # log + # fatal + # panic + +#log_min_error_statement = error # values in order of decreasing detail: + # debug5 + # debug4 + # debug3 + # debug2 + # debug1 + # info + # notice + # warning + # error + # log + # fatal + # panic (effectively off) + +#log_min_duration_statement = -1 # -1 is disabled, 0 logs all statements + # and their durations, > 0 logs only + # statements running at least this number + # of milliseconds + +#log_min_duration_sample = -1 # -1 is disabled, 0 logs a sample of statements + # and their durations, > 0 logs only a sample of + # statements running at least this number + # of milliseconds; + # sample fraction is determined by log_statement_sample_rate + +#log_statement_sample_rate = 1.0 # fraction of logged statements exceeding + # log_min_duration_sample to be logged; + # 1.0 logs all such statements, 0.0 never logs + + +#log_transaction_sample_rate = 0.0 # fraction of transactions whose statements + # are logged regardless of their duration; 1.0 logs all + # statements from all transactions, 0.0 never logs + +#log_startup_progress_interval = 10s # Time between progress updates for + # long-running startup operations. + # 0 disables the feature, > 0 indicates + # the interval in milliseconds. + +# - What to Log - + +#debug_print_parse = off +#debug_print_rewritten = off +#debug_print_plan = off +#debug_pretty_print = on +#log_autovacuum_min_duration = 10min # log autovacuum activity; + # -1 disables, 0 logs all actions and + # their durations, > 0 logs only + # actions running at least this number + # of milliseconds. +#log_checkpoints = on +#log_connections = off +#log_disconnections = off +#log_duration = off +#log_error_verbosity = default # terse, default, or verbose messages +#log_hostname = off +log_line_prefix = '%m [%p] %q%u@%d ' # special values: + # %a = application name + # %u = user name + # %d = database name + # %r = remote host and port + # %h = remote host + # %b = backend type + # %p = process ID + # %P = process ID of parallel group leader + # %t = timestamp without milliseconds + # %m = timestamp with milliseconds + # %n = timestamp with milliseconds (as a Unix epoch) + # %Q = query ID (0 if none or not computed) + # %i = command tag + # %e = SQL state + # %c = session ID + # %l = session line number + # %s = session start timestamp + # %v = virtual transaction ID + # %x = transaction ID (0 if none) + # %q = stop here in non-session + # processes + # %% = '%' + # e.g. '<%u%%%d> ' +#log_lock_waits = off # log lock waits >= deadlock_timeout +#log_recovery_conflict_waits = off # log standby recovery conflict waits + # >= deadlock_timeout +#log_parameter_max_length = -1 # when logging statements, limit logged + # bind-parameter values to N bytes; + # -1 means print in full, 0 disables +#log_parameter_max_length_on_error = 0 # when logging an error, limit logged + # bind-parameter values to N bytes; + # -1 means print in full, 0 disables +#log_statement = 'none' # none, ddl, mod, all +#log_replication_commands = off +#log_temp_files = -1 # log temporary files equal or larger + # than the specified size in kilobytes; + # -1 disables, 0 logs all temp files +log_timezone = 'Asia/Tehran' + +#------------------------------------------------------------------------------ +# PROCESS TITLE +#------------------------------------------------------------------------------ + +cluster_name = '15/{{ name }}' # added to process titles if nonempty + # (change requires restart) +#update_process_title = on + + +#------------------------------------------------------------------------------ +# STATISTICS +#------------------------------------------------------------------------------ + +# - Cumulative Query and Index Statistics - + +#track_activities = on +#track_activity_query_size = 1024 # (change requires restart) +#track_counts = on +#track_io_timing = off +#track_wal_io_timing = off +#track_functions = none # none, pl, all +#track_activity_query_size = 1024 # (change requires restart) + + +# - Monitoring - + +#compute_query_id = auto +#log_statement_stats = off +#log_parser_stats = off +#log_planner_stats = off +#log_executor_stats = off + + +#------------------------------------------------------------------------------ +# AUTOVACUUM +#------------------------------------------------------------------------------ + +#autovacuum = on # Enable autovacuum subprocess? 'on' + # requires track_counts to also be on. +#autovacuum_max_workers = 3 # max number of autovacuum subprocesses + # (change requires restart) +#autovacuum_naptime = 1min # time between autovacuum runs +#autovacuum_vacuum_threshold = 50 # min number of row updates before + # vacuum +#autovacuum_vacuum_insert_threshold = 1000 # min number of row inserts + # before vacuum; -1 disables insert + # vacuums +#autovacuum_analyze_threshold = 50 # min number of row updates before + # analyze +#autovacuum_vacuum_scale_factor = 0.2 # fraction of table size before vacuum +#autovacuum_vacuum_insert_scale_factor = 0.2 # fraction of inserts over table + # size before insert vacuum +#autovacuum_analyze_scale_factor = 0.1 # fraction of table size before analyze +#autovacuum_freeze_max_age = 200000000 # maximum XID age before forced vacuum + # (change requires restart) +#autovacuum_multixact_freeze_max_age = 400000000 # maximum multixact age + # before forced vacuum + # (change requires restart) +#autovacuum_vacuum_cost_delay = 2ms # default vacuum cost delay for + # autovacuum, in milliseconds; + # -1 means use vacuum_cost_delay +#autovacuum_vacuum_cost_limit = -1 # default vacuum cost limit for + # autovacuum, -1 means use + # vacuum_cost_limit + + +#------------------------------------------------------------------------------ +# CLIENT CONNECTION DEFAULTS +#------------------------------------------------------------------------------ + +# - Statement Behavior - + +#client_min_messages = notice # values in order of decreasing detail: + # debug5 + # debug4 + # debug3 + # debug2 + # debug1 + # log + # notice + # warning + # error +#search_path = '"$user", public' # schema names +#row_security = on +#default_table_access_method = 'heap' +#default_tablespace = '' # a tablespace name, '' uses the default +#default_toast_compression = 'pglz' # 'pglz' or 'lz4' +#temp_tablespaces = '' # a list of tablespace names, '' uses + # only default tablespace +#check_function_bodies = on +#default_transaction_isolation = 'read committed' +#default_transaction_read_only = off +#default_transaction_deferrable = off +#session_replication_role = 'origin' +#statement_timeout = 0 # in milliseconds, 0 is disabled +#lock_timeout = 0 # in milliseconds, 0 is disabled +#idle_in_transaction_session_timeout = 0 # in milliseconds, 0 is disabled +#idle_session_timeout = 0 # in milliseconds, 0 is disabled +#vacuum_freeze_table_age = 150000000 +#vacuum_freeze_min_age = 50000000 +#vacuum_failsafe_age = 1600000000 +#vacuum_multixact_freeze_table_age = 150000000 +#vacuum_multixact_freeze_min_age = 5000000 +#vacuum_multixact_failsafe_age = 1600000000 +#bytea_output = 'hex' # hex, escape +#xmlbinary = 'base64' +#xmloption = 'content' +#gin_pending_list_limit = 4MB + +# - Locale and Formatting - + +datestyle = 'iso, mdy' +#intervalstyle = 'postgres' +timezone = 'Asia/Tehran' +#timezone_abbreviations = 'Default' # Select the set of available time zone + # abbreviations. Currently, there are + # Default + # Australia (historical usage) + # India + # You can create your own file in + # share/timezonesets/. +#extra_float_digits = 1 # min -15, max 3; any value >0 actually + # selects precise output mode +#client_encoding = sql_ascii # actually, defaults to database + # encoding + +# These settings are initialized by initdb, but they can be changed. +lc_messages = 'en_US.UTF-8' # locale for system error message + # strings +lc_monetary = 'en_US.UTF-8' # locale for monetary formatting +lc_numeric = 'en_US.UTF-8' # locale for number formatting +lc_time = 'en_US.UTF-8' # locale for time formatting + +# default configuration for text search +default_text_search_config = 'pg_catalog.english' + +# - Shared Library Preloading - + +#local_preload_libraries = '' +#session_preload_libraries = '' +#shared_preload_libraries = '' # (change requires restart) +#jit_provider = 'llvmjit' # JIT library to use + +# - Other Defaults - + +#dynamic_library_path = '$libdir' +#extension_destdir = '' # prepend path when loading extensions + # and shared objects (added by Debian) +#gin_fuzzy_search_limit = 0 + + +#------------------------------------------------------------------------------ +# LOCK MANAGEMENT +#------------------------------------------------------------------------------ + +#deadlock_timeout = 1s +#max_locks_per_transaction = 64 # min 10 + # (change requires restart) +#max_pred_locks_per_transaction = 64 # min 10 + # (change requires restart) +#max_pred_locks_per_relation = -2 # negative values mean + # (max_pred_locks_per_transaction + # / -max_pred_locks_per_relation) - 1 +#max_pred_locks_per_page = 2 # min 0 + + +#------------------------------------------------------------------------------ +# VERSION AND PLATFORM COMPATIBILITY +#------------------------------------------------------------------------------ + +# - Previous PostgreSQL Versions - + +#array_nulls = on +#backslash_quote = safe_encoding # on, off, or safe_encoding +#escape_string_warning = on +#lo_compat_privileges = off +#quote_all_identifiers = off +#standard_conforming_strings = on +#synchronize_seqscans = on + +# - Other Platforms and Clients - + +#transform_null_equals = off + + +#------------------------------------------------------------------------------ +# ERROR HANDLING +#------------------------------------------------------------------------------ + +#exit_on_error = off # terminate session on any error? +#restart_after_crash = on # reinitialize after backend crash? +#data_sync_retry = off # retry or panic on failure to fsync + # data? + # (change requires restart) +#recovery_init_sync_method = fsync # fsync, syncfs (Linux 5.8+) + + +#------------------------------------------------------------------------------ +# CONFIG FILE INCLUDES +#------------------------------------------------------------------------------ + +# These options allow settings to be loaded from files other than the +# default postgresql.conf. Note that these are directives, not variable +# assignments, so they can usefully be given more than once. + +include_dir = 'conf.d' # include files ending in '.conf' from + # a directory, e.g., 'conf.d' +#include_if_exists = '...' # include file only if it exists +#include = '...' # include file + + +#------------------------------------------------------------------------------ +# CUSTOMIZED OPTIONS +#------------------------------------------------------------------------------ + +# Add settings for extensions here diff --git a/pgkit/cli/commands/config.py b/pgkit/cli/commands/config.py index 1fdb9ae..65c690b 100644 --- a/pgkit/cli/commands/config.py +++ b/pgkit/cli/commands/config.py @@ -13,7 +13,7 @@ def config(): @config.command() @click.option('--name', help='Postgres Name', required=True, prompt=True) @click.option('--version', help='Postgres Version', required=True, prompt=True, - type=click.Choice(['9.5', '10', '11', '12', '13'], case_sensitive=False)) + type=click.Choice(['9.5', '10', '11', '12', '13', '14', '15'], case_sensitive=False)) @click.option('--host', help='Host IP', required=True, prompt=True) @click.option('--port', help='Port Number', required=True, prompt=True, type=int) @click.option('--dbname', help='Database Name', required=True, prompt=True) @@ -32,7 +32,7 @@ def add(name, version, host, port, dbname, slot, username, password, replica_por @click.argument('name', required=True) @click.option('--new_name', help='Postgres New name', required=False, prompt=False) @click.option('--version', help='Postgres Version', required=False, prompt=False, - type=click.Choice(['9.5', '10', '11', '12', '13'], case_sensitive=False)) + type=click.Choice(['9.5', '10', '11', '12', '13', '14', '15'], case_sensitive=False)) @click.option('--host', help='Host IP', required=False, prompt=False) @click.option('--port', help='Port Number', required=False, prompt=False, type=int) @click.option('--dbname', help='Database Name', required=False, prompt=False)