Skip to content

Latest commit

 

History

History
95 lines (64 loc) · 3.24 KB

README.md

File metadata and controls

95 lines (64 loc) · 3.24 KB

Sensirion I2C SEN5X Arduino Library

This is the Sensirion SEN5X library for Arduino using the modules I2C interface.

Supported sensors

  • SEN50 (only particulate matter signals available)
  • SEN54 (no NOx signal available)
  • SEN55 (full feature set)

Installation

To install, download the latest release as .zip file and add it to your Arduino IDE via

Sketch => Include Library => Add .ZIP Library...

Don't forget to install the dependencies listed below the same way via Add .ZIP Library

Note: Installation via the Arduino Library Manager is coming soon.

Dependencies

Quick Start

  1. Connect the SEN5X Sensor to your Arduino board's standard I2C bus. Check the pinout of your Arduino board to find the correct pins. The pinout of the SEN5X Sensor board can be found in the data sheet.

    SEN5X Arduino Jumper Wire
    VCC 5V Red
    GND GND Black
    SDA SDA Green
    SCL SCL Yellow
    SEL GND for I2C Blue
    Pin Name Description Comments
    1 VCC Supply Voltage 5V ±10%
    2 GND Ground
    3 SDA I2C: Serial data input / output TTL 5V and LVTTL 3.3V compatible
    4 SCL I2C: Serial clock input TTL 5V and LVTTL 3.3V compatible
    5 SEL Interface select Pull to GND to select I2C
    6 NC Do not connect
  2. Open the exampleUsage sample project within the Arduino IDE

     File => Examples => Sensirion I2C SEN5X => exampleUsage
    
  3. Click the Upload button in the Arduino IDE or

     Sketch => Upload
    
  4. When the upload process has finished, open the Serial Monitor or Serial Plotter via the Tools menu to observe the measurement values. Note that the Baud Rate in the corresponding window has to be set to 115200 baud.

Contributing

Contributions are welcome!

We develop and test this driver using our company internal tools (version control, continuous integration, code review etc.) and automatically synchronize the master branch with GitHub. But this doesn't mean that we don't respond to issues or don't accept pull requests on GitHub. In fact, you're very welcome to open issues or create pull requests :)

This Sensirion library uses clang-format to standardize the formatting of all our .cpp and .h files. Make sure your contributions are formatted accordingly:

The -i flag will apply the format changes to the files listed.

clang-format -i src/*.cpp src/*.h

Note that differences from this formatting will result in a failed build until they are fixed.

License

See LICENSE.