This PCB is a USB Type C enabled ESP32 development board. It is pin-compatible
with the ESP32 Devkit C but sports a slightly decreased width to fit on a
standard breadboard.
The current revision (Rev E) has been tested and confirmed to work fine.
- USB Type C
- pin-compatible with ESP32 Devkit
- fits on standard breadboard
- onboard antenna
- jumper to short USB protection diode
Furthermore this board is optimized for JLCPCB assembly, a Chinese SMT PCB assembly service. All components on this board, except the USB Type C connector, the push buttons and the pin headers can be assembled by them for around ~$8 including PCB manufacturing and components.
There is an interactive HTML BOM to help you assemble the board.
Assuming you are using JLCPCB SMT assembly you will need to populate just the following parts by hand:
| Reference | Description | LCSC |
|---|---|---|
| J1 | USB Type C connector | C167321 |
| SW1, SW2 | RESET/BOOT push button | C115357 |
| J2, J3 | Pin headers | C2337 |
