Skip to content

Latest commit

 

History

History
17 lines (14 loc) · 1.25 KB

README.md

File metadata and controls

17 lines (14 loc) · 1.25 KB
Raw
install docker

How to install:

WAGO recommends exclusive use of original WAGO SD cards, as the new firmware has been tested and released based on these cards. If using cards other than WAGO, WAGO cannot guarantee and take responsibility for proper functioning of the TP600.

Installation

  1. Delete full content of the card with tools like "DiskPart" or any other, google is your friend:)
  2. Write image on the WAGO SD card with "Win32DiskImager" - to download click here: https://sourceforge.net/projects/win32diskimager/
  3. Plug-in the WAGO SD card first before booting the TP600.
  4. Adjust the static IP address with "Wago Ethernet Settings" or use the touch panel ;).
  5. Due to changes in the WebBasedManagement (WBM), make sure to delete the full browser cache (!) and restart the browser after.
  6. Open "WebBasedManagement / Administrations – Menue / Create Image // Create bootable image from active partition (SD) // Start Copy".
  7. WAGO Ethernet settings is at least required in version 6.8.2.2. To download this version, click following link: https://wago.sharefile.eu/share/view/s7ceb2f61d474fcca