Assemble the Netgate 1100 Shelf

{{BOM}}

Prepare the tray {pagestep}

Take the Netgate Shelf{qty:1, cat:printed} you printed earlier and a 2.5mm Allen key{qty:1, cat:tool}.
Lightly screw a M3x12mm cap screw{qty:2} into the top hole of each of the two rear posts.
Make sure each screw is inserted less than half way.

Secure the Netgate 1100 {pagestep}

Position the Netgate 1100 Firewall Appliance{qty:1, cat:net} on the shelf so that the ports are visible through the front of the tray

Tighten each screw until the switch is held firmly *{warning} Do not over tighten the screws in this step as this may damage the plastic.

[Assembled Netgate Shelf]{output, qty:1, hidden}