emu 0202 issues #118
Comments
Closed
|
@maxelroad what's the thing with The driver seems installed properly. So what happens when you try to use it? Do you see it in te USB device overview? (Apple menu/About this mac/Overview/System Report/USB) |
|
Computer driver shows.
There are no sound devices in the list of 0202
And I do not understand how to install the control panel from drivers 0202.
… 12 февр. 2019 г., в 11:31, Wouter1 ***@***.***> написал(а):
@maxelroad <https://github.com/maxelroad> what's the thing with sudo spctl --master-desable?
The driver seems installed properly. So what happens when you try to use it? Do you see it in te USB device overview? (Apple menu/About this mac/Overview/System Report/USB)
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub <#118 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AtUQlG1OBuH4--fIaEdVBmGAHT0qzYgpks5vMnvkgaJpZM4a12Xr>.
|
|
This is what I see in System Report.
E-MU 0202 | USB:
Product ID: 0x3f02
Vendor ID: 0x041e (Creative Labs)
Version: 1.00
Serial Number: E-MU-03-3F02-07DA0C05-0E92F-8740T2A
Speed: Up to 480Mb/sec
Manufacturer: E-MU Systems, Inc.
Location ID: 0x14100000 / 6
Current Available (mA): 500
Current Required (mA): 450
Extra Operating Current (mA): 0
Devices:
Built-in Microphone:
Default Input Device: Yes
Input Channels: 2
Manufacturer: Apple Inc.
Current SampleRate: 44100
Transport: Built-in
Input Source: Internal Microphone
Built-in Output:
Default Output Device: Yes
Default System Output Device: Yes
Manufacturer: Apple Inc.
Output Channels: 2
Current SampleRate: 44100
Transport: Built-in
Output Source: Internal Speakers
Soundflower (2ch):
Input Channels: 2
Manufacturer: ma++ ingalls for Cycling '74
Output Channels: 2
Current SampleRate: 44100
Transport: Unknown
Input Source: Default
Output Source: Default
Sonarworks True-Fi:
Input Channels: 2
Manufacturer: SIA Sonarworks
Output Channels: 2
Current SampleRate: 44100
Transport: Unknown
Input Source: Default
Output Source: Default
… On 12 Feb 2019, at 11:39, Michael Axelrod ***@***.***> wrote:
Computer driver shows.
There are no sound devices in the list of 0202
And I do not understand how to install the control panel from drivers 0202.
> 12 февр. 2019 г., в 11:31, Wouter1 ***@***.*** ***@***.***>> написал(а):
>
> @maxelroad <https://github.com/maxelroad> what's the thing with sudo spctl --master-desable?
>
> The driver seems installed properly. So what happens when you try to use it? Do you see it in te USB device overview? (Apple menu/About this mac/Overview/System Report/USB)
>
> —
> You are receiving this because you were mentioned.
> Reply to this email directly, view it on GitHub <#118 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AtUQlG1OBuH4--fIaEdVBmGAHT0qzYgpks5vMnvkgaJpZM4a12Xr>.
>
|
|
Ok the system notices the USB device and it has USB2 connection. You don't need to install the control panel. You can just double click the "E-MU USB Audio Control Panel.app" inside the Control Panel inside the zip. What happens if you do that? And, do you see the EMU now if you go to system preferences/Sound? |
|
Not
С уважением, Михаил.
тел: +79169013595
вт, 12 февр. 2019 г., 16:09 Wouter1 notifications@github.com:
… @maxelroad <https://github.com/maxelroad>
Ok the system notices the USB device and it has USB2 connection.
You don't need to install the control panel. You can just double click the
"E-MU USB Audio Control Panel.app" inside the Control Panel inside the zip.
What happens if you do that?
And, do you see the EMU now if you go to system preferences/Sound?
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
<#118 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/AtUQlO6axeepFb1Wv4zGSItM-5gWDLiTks5vMr0JgaJpZM4a12Xr>
.
|
|
@maxelroad Huh? Please refer to the questions and answer each |
|
The control panel does not open correctly; the selection points for the quantization frequency are not visible
just a gray window
device not visible in system settings
… 12 февр. 2019 г., в 16:32, Wouter1 ***@***.***> написал(а):
@maxelroad <https://github.com/maxelroad> Huh? Please refer to the questions and answer each
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub <#118 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AtUQlATBduiK67hljJ7WLYM5Agw1e8Wcks5vMsKKgaJpZM4a12Xr>.
|
|
@maxelroad can you please collect and report the system log coming from the EMU driver? Start the log a second before turning on and stop a few seconds after turning on. |
|
Hi!
Look
Install terminal text:
EMU USB Installer by W.Pasman
usage: dirname path
Use low latency setting (n/y)?: ny
cp: v11/EMUUSBAudio.kext: No such file or directory
Adjusting driver for low latency
/Users/axel/Downloads/EMU-driver-master (1).zip Folder/EMU-driver-master/installer: line 52: cd: /Users/axel/EMUUSBAudio.kext/Contents/: No such file or directory
(Re)placing EMU kernel extension. We need the admin password for this.
Password:
Sorry, try again.
Password:
rm: /System/Library/Extensions/EMUUSBAudio.kext: No such file or directory
cp: EMUUSBAudio.kext: No such file or directory
cp: EMUMIDIDriver orig.plugin: No such file or directory
chgrp: EMUMIDIDriver.plugin: No such file or directory
chgrp: EMUUSBAudio.kext: No such file or directory
/System/Library/Extensions/EMUUSBAudio.kext failed to load - (libkern/kext) not found; check the system/kernel logs for errors or try kextutil(8).
Waiting for the system to finish installation. Can take several minutes.
Rebuilding the kernel
Waiting for lock to replace the old kernel
Driver is installed and ready for use!
You can close this window.
logout
Saving session...
...copying shared history...
...saving history...truncating history files...
...completed.
I don't like what the terminal says
… 13 февр. 2019 г., в 0:54, Wouter1 ***@***.***> написал(а):
@maxelroad <https://github.com/maxelroad> can you please collect and report the system log coming from the EMU driver? Start the log a second before turning on and stop a few seconds after turning on.
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub <#118 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AtUQlJd7yuWQOi8HX3FRIzFqVoi8p812ks5vMzgBgaJpZM4a12Xr>.
|
|
@maxelroad I asked for the system log, not the text from the installer. But the installer does not work prperly. If you want to reinsall you have to download the zip file fresh |
|
I am sorry, but how to make this log. I have never done this before.
The installer is downloaded from this link: https://github.com/Wouter1/EMU-driver.git <https://github.com/Wouter1/EMU-driver.git>
on Windows, which is installed in the program Рarallels everything works. The device is working.
… 13 февр. 2019 г., в 10:37, Wouter1 ***@***.***> написал(а):
Reopened #118 <#118>.
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub <#118 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AtUQlH9hVHUtLoQfbR9jX1Lo4IHaed8nks5vM8DJgaJpZM4a12Xr>.
|
|
@maxelroad It's a long time ago so I can't remember exactly. Try using the Console application in Utilities and google how to filter the EMU messages |
|
Mark Verduin mailed me Na het afstoffen van mijn EMU 2002 volg ik met veel belangstelling je Github EMU-driver repository https://github.com/Wouter1/EMU-driver. Daar ik niet over een Github-account beschik, stuur ik je mijn vraag per mail - vanzelfsprekend mag je de vraag eventuele oplossingen gebruiken voor de community. iMac (21,5 inch late 2009) De instructies voor installatie heb ik gevolgd (https://github.com/Wouter1/EMU-driver/blob/master/Install.md) Zou je me willen helpen mijn EMU weer werkend te krijgen? |
|
Mark it seems that the driver was starting up properly at 09:22:23. Can you open the control panel (from terminal/command line) and see what it says |
|
Mark replied Yes, EMU turned off at 09:22:30. Terminal says nothing, control panel just opens, but not right, see scr shot:
|
|
Seems you ran the control panel by double clicking, as it has no skin. Additionally, can you confurm that the extension loaded (about this mac/system report/extensions) |
|
Mark replied I'm a novice in command line and did this: open E-MU\ USB\ Audio\ Control\ Panel.app in /Applications/Controlpanel/EMU-driver-master It seems it doesn't load a skin. Am I doing something wrong? Further the system reports says: |
|
I tried this:
In terminal /Applications/EMU-driver-master/ControlPanel/E-MU\ USB\ Audio\ Control\ Panel.app/Contents/MacOS/E-MU\ USB\ Audio\ Control\ Panel ; exit; And this shows up: But preferences haven been grayed out:
|
|
It seems all working fine. You even got it working at 192k. Congratulations :-) |
|
Mark wrote Still not good working. I unistalled Jan 18 14:12:46 Mark2 com.apple.xpc.launchd[1] (com.apple.quicklook[968]): Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook |
|
Mark FAIK quicklook has nothing to do with the EMU driver. Maybe something with the control panel but I doubt it. What is the status of the extension (About this mac/System Report/Extensions) EDIT in fact the extension has loaded, otherwise you could not have the control panel working. What happens if you try to play or record sound from quicktime player? |
|
Mark wrote
I also noticed that the green Stereo/Mono leds on the hardware/device aren't working anymore. |
|
Mark, please undo your most recent actions to the place where it worked. Control panel should show what it showed you before, with sample rate and device ID |
|
Mark wrote But whatever I try it says No E-MU Devices found. In System Information I see: This is was the console says when i start up the EMU. Would you please tell me what to do? |
|
EMU seems starting up OK. You broke the log output halfway Default Sample rate is set to 0. Don;t know what's going on . Please use control panel to set it properly. |
|
Mark This might be a problem similar to a known issue on the EMU 0204 as reported on the main wiki page:
Did you try that? |
|
I'm having a similar issue. The card worked when I first installed the driver, but then I switched it off and back on, and now it's not visible in Audio & MIDI Setup or System Preferences. It's in the list of devices in System Information though (USB section). What I've noticed in the log is this: Could it be the issue? There's also this line when it starts |
|
@Yagio |
|
It's Hight Sierra 10.13.6, iMac 27" (Mid 2011), E-MU 0202, connected directly to the Mac. |
|
The message "default 21:45:17.938692 +0000 kernel Can't unload kext com.emu.driver.EMUUSBAudio; classes have instances:" seems to say that your EMU is currently on and that the driver therfore can not be installed/replaced Can you retry installing after turning off the EMU and rebooting |
|
same issue here, installed e-mu 0202 on macOS version 10.14.6 and says NO E-MU Devices Found. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
@maxelroad wrote (originally ticket #114
new attempt to install the driver e-mu.
MacBook Pro 2015 16GB, Mojave
E-MU 0202 CSS
the computer does not see the device. The installation was carried out in accordance with the description.
I bring text from the terminal windows in accordance with the sequence of operations
recovery mode:
-bash-3.2# csrutil enable --without kext
csrutil: requesting an unsupported configuration. This is likely to break in the future and leave your machine in an unknown state.
Successfully enabled System Integrity Protection. Please restart the machine for the changes to take effect.
reboot
after reboot:
Last login: Tue Feb 12 09:44:19 on console
MacBook-Pro15:~ axel$ sudo spctl --master-desable
Password:
spctl: unrecognized option `--master-desable'
System Policy Basic Usage:
spctl --assess [--type type] [-v] path ... # assessment
spctl --add [--type type] [--path|--requirement|--anchor|--hash] spec ... # add rule(s)
spctl [--enable|--disable|--remove] [--type type] [--path|--requirement|--anchor|--hash|--rule] spec # change rule(s)
spctl --status | --master-enable | --master-disable # system master switch
Kernel Extension User Consent Usage:
spctl kext-consent ** Modifications only available in Recovery OS **
status
Print whether kernel extension user consent is enabled or disabled.
enable
Enable requiring user consent for kernel extensions.
disable
Disable requiring user consent for kernel extensions.
add
Insert a new Team Identifier into the list allowed to load kernel extensions without user consent.
list
Print the list of Team Identifiers allowed to load without user consent.
remove
Remove a Team Identifier from the list allowed to load kernel extensions without user consent.
reboot
after reboot:
Last login: Tue Feb 12 10:08:03 on ttys000
MacBook-Pro15:~ axel$ /Users/axel/Downloads/EMU-driver-master/installer ; exit;
EMU USB Installer by W.Pasman
Use low latency setting (n/y)?: ny
Adjusting driver for low latency
(Re)placing EMU kernel extension. We need the admin password for this.
Password:
Waiting for the system to finish installation. Can take several minutes.
Rebuilding the kernel
Waiting for lock to replace the old kernel
Driver is installed and ready for use!
You can close this window.
logout
Saving session...
...copying shared history...
...saving history...truncating history files...
...completed.
The text was updated successfully, but these errors were encountered: