Skip to content

Latest commit

 

History

History
54 lines (42 loc) · 3.71 KB

README.md

File metadata and controls

54 lines (42 loc) · 3.71 KB
Raw

Arduino-Aime-Reader

Aime compatible card reader made using Arduino + PN532 + WS2812B. Supported card types: [FeliCa] (https://zh.wikipedia.org/wiki/FeliCa ) (Amusement IC, Suica, Octopus, etc.) and [MIFARE] (https://zh.wikipedia.org/wiki/MIFARE ) (Aime, Banapassport). The implementation logic is the official card reader serial port data comparison + brain compensation, and the correct implementation is not guaranteed. The communication data format refers to Segatools and the official card reader to capture the packet data, which can be found in [Example. txt](doc/Example. txt) and [nfc. txt](doc/nfc. txt) view.

How to use：

  1. According to [PN532] (https://github.com/elechouse/PN532 ) Prompt to install the library
  2. According to the usage method, connect the cable (I2C or SPI) between Arduino and PN532, and adjust the dip switch on PN532
  3. Connect to WS2812B light bar (optional)
  4. Upload [ReaderTest] (tools/ReaderTest/ReaderTest. ino) Test whether the hardware is working properly
  5. If the card reading is normal, you can open the device manager and set the COM port number according to the support list
  6. Set the high_baudrate option of the code according to the baud rate of the game, 115200 is'true,38400 is 'false
  7. Upload the program to open the game test
  8. Install [MifareClassicTool] (https://github.com/ikarus23/MifareClassicTool ), modify [Aime card example] (doc/aime example. mct) Then write to the blank MIFARE UID/CUID card

Some Arduino may need to send DTR/RTS to the serial port at the correct baud rate before the game main program is connected. You need to open the Arduino serial monitor once before starting the main program. If it is SDBT, you can run it once before starting [DTR-RTS. exe](tools/DTR-RTS. exe) to send DTR/RTS to COM1 and COM12. If you need to send to other ports and specific baud rates, you can modify [DTR-RTS. c](tools/DTR-RTS. c) Then compile.

Support list：

Game code COM port number Supported cards Default baud rate
SDDT/SDEZ COM1 FeliCa,MIFARE 115200
SDEY COM2 MIFARE 38400
SDHD COM4 FeliCa,MIFARE cvt=38400,sp=115200
SBZV/SDDF COM10 FeliCa,MIFARE 38400
SDBT COM12 FeliCa,MIFARE 38400

-If the card reader is not working properly, you can switch the baud rate and try it -If you use amdaemon, you can refer to config_common. Confirm the port number in aime > unit> port in json -If "high_baudrate": true, the baud rate is 115200, otherwise it is '38400`

Tested development board：

-SparkFun Pro Micro (ATmega32u4), need to send DTR/RTS

  • SparkFun SAMD21 Dev Breakout（ATSAMD21G18）
  • NodeMCU 1.0（ESP-12E + CP2102 & CH340），SDA=D2，SCL=D1

Known issues：

-The write Felica operation of the NDA_08 command was not implemented because it was not confirmed whether it would affect the subsequent use of the card. -Undetermined'res. The meaning of'status, so'res. status=1;may be wrong -Becauseget_fw and'get_hw' return custom version numbers, amdaemon's firmware upgrade may be triggered at startup. You can rename or delete the aime_firm folder. -mifare_select_tag is not implemented, multi-card selection is not supported, only the first recognized card will be read

Reference library：

-Driver WS2812B: [FastLED] (https://github.com/FastLED/FastLED ) -Drive PN532: [PN532] (https://github.com/elechouse/PN532 ) -Reference for reading FeliCa: [PN532使使使ArduinoFelFel FeliCa Student ID Reading method] (https://qiita.com/gpioblink/items/91597a5275862f7ffb3c ) -Program for reading FeliCa data: [NFC TagInfo] (https://play.google.com/store/apps/details?id=at.mroland.android.apps.nfctaginfo ), NFC TagInfo by NXP