Mac M1 Pro with OptimizIR 2.0

[mikeg-dal]

Seems to work well when auto track is on. 180/Bi-Dir/Norm/Home/Auto work fine.

Turn auto off and try to move the elements and they don't seem to respond. Not sure if expected behavior or not. Awesome to see someone working on Mac Software.

[aa5sh]

For me I had to turn off the usb cable in my flex for the manual to work. If it is getting information from a radio it will override from what I read. Thanks for the feedback.

…

On Mon, Sep 9, 2024 at 6:54 PM mg1011 ***@***.***> wrote: Seems to work well when auto track is on. 180/Bi-Dir/Norm/Home/Auto work fine. Turn auto off and try to move the elements and they don't seem to respond. Not sure if expected behavior or not. Awesome to see someone working on Mac Software. — Reply to this email directly, view it on GitHub <#1>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AUEEMXQIMUYRGJ6SSS2Y5RDZVYYJXAVCNFSM6AAAAABN5SGVW2VHI2DSMVQWIX3LMV43ERDJONRXK43TNFXW4OZXGE3DENBVGA> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[mikeg-dal]

So I have been thinking this over and trying to figure out a way to get the SteppIR controller to Ignore whats coming from the rig when auto-track is off. I am getting stuck because I THINK I need to define both serial port names, but I am unable to find a way to determine which is which. For example. Define S0 and S1 as the top and bottom ports. If autotrack enabled proceed with acting on information from eg " S0". If autotrack disabled then ignore "S0" and act on "S1" which will be input from the program and the USB to Serial Adapter plugged into the computer. Documentation for the programming is lacking.