Skip to content

Latest commit

 

History

History
78 lines (61 loc) · 2.92 KB

README.md

File metadata and controls

78 lines (61 loc) · 2.92 KB
Raw

This is an adapted version of drmon written by acidjazz. It has been modified to work with 1.12.2 and has some added features

status: currently in development

drmon

monitor and failsafe automation for your draconic reactor

Bat

Monitor for Draconic Storage

Pocket

Remote access to reactor controls and monitoring

what is this

This is a set of computercraft LUA scripts that monitors everything about a draconic reactors and storage, with a couple features to help keep it from exploding NB: This is for Minecraft 1.12.2. You will need to answer some questions on console during install

tutorial

1.7.10 you can find a very well made youtube tutorial on how to set this up here , thank you The MindCrafters

I have not created a tutorial for 1.12.2 yet.

features

  • uses a 3x3 advanced computer touchscreen monitor to interact with your reactor
  • automated regulation of the input gate for the targeted field strength of 50%
  • immediate shutdown and charge upon your field strength going below 20%
    • reactor will activate upon a successful charge
  • immediate shutdown when your temperature goes above 8000C
    • reactor will activate upon temperature cooling down to 3000C
  • easily tweak your output flux gate via touchscreen buttons
    • +/-100k, 10k, and 1k increments
  • monitor storage cell capacity on 3x3 screen connected the same way as reactor monitoring
  • remote monitoring is available via ender modems(optional)
    • Remote monitoring can monitor multiple reactors at once.
    • Allows for remote status, shutdown, startup of reactors and patching

requirements

  • one fully setup draconic reactor with fuel
  • 1 advanced computer
  • 9 advanced monitors
  • 4 wired modems, wireless will not work
  • a bunch of network cable
  • 1 ender modem (Optional)

installation

  • One of the reactor stabilizers needs to touch a side of the advanced computer
  • The flux gates and monitors need to be connected by modem
  • connect a modem to your input flux gate (the one connected to your reactor energy injector)
  • Take note of the name when you turn the modem on
  • connect a modem to your output flux gate
  • connect a modem to your advanced computer
  • setup yoru monitors to be a 3x3 and connect a modem to anywhere but the front
  • run network cable to all 4 modems
  • install this code via running the install script using these commands :
> pastebin get mgF6RZFQ startup
> startup

> On Advanced ender pocket computer (Optional)
> pastebin get PUWxdYWY startup
> startup
  • you should see stats in your term, and on your monitor

upgrading to the latest version

  • right click your computer
  • hold ctrl+t until you get a >
> reboot

known issues

  • there is a problem with skyfactory 2.5 and pastebin, see workarounds here