You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
The device will be flashed with a software that allows to receive Bluetooth connection. The Led will turn from red to green to indicate the connection has been established.
Test Execution
Manual
Objective
The goad of this test is to prove basic Bluetooth functionality of the device.
Test Environment
School PC (Lenovo ThinkPad)
Dependencies
Defined by "Test Environment". Refer to the Test Book for more details on the configurations.
Preconditions
No components other than the battery and the testing machine should be connected to the board and be in good physical condition. Room temperature should be normal, and high electromagnetic fields should be avoided.
Post-conditions
After success, the LED should remain green. Unplug the device when ready to tear down the experiment.
Test Data
A simple program named TEST_0000002 will be written for this test case.
Steps
Step ID
Step Description
Step Date
Expected Results
Actual Results
Pass / Fail
Add. Notes
O
Cell
Cell
Cell
Cell
Cell
Cell
1
Cell
Cell
Cell
Cell
Cell
Cell
2
Cell
Cell
Cell
Cell
Cell
Cell
Notes
No response
The text was updated successfully, but these errors were encountered:
mathiskakal
added
hardware
touches on the hardware of the project
test
The issue represents a test to be performed on one or more of the project's artificats.
labels
Mar 23, 2024
Test Case Title
XIAO Basic Bluetooth test
Test Status
Pending
Test Description
The device will be flashed with a software that allows to receive Bluetooth connection. The Led will turn from red to green to indicate the connection has been established.
Test Execution
Manual
Objective
The goad of this test is to prove basic Bluetooth functionality of the device.
Test Environment
School PC (Lenovo ThinkPad)
Dependencies
Defined by "Test Environment". Refer to the Test Book for more details on the configurations.
Preconditions
No components other than the battery and the testing machine should be connected to the board and be in good physical condition. Room temperature should be normal, and high electromagnetic fields should be avoided.
Post-conditions
After success, the LED should remain green. Unplug the device when ready to tear down the experiment.
Test Data
A simple program named
TEST_0000002
will be written for this test case.Steps
Notes
No response
The text was updated successfully, but these errors were encountered: