ubuntu_release.yml

name: Ubuntu-Release

on:
  push:
    paths-ignore:
      - 'README.md'
      - 'doc/**'
  pull_request:
    paths-ignore:
      - 'README.md'
      - 'doc/**'

env:
  # Customize the CMake build type here (Release, Debug, RelWithDebInfo, etc.)
  BUILD_TYPE: Release

jobs:
  build:
    # The CMake configure and build commands are platform agnostic and should work equally well on Windows or Mac.
    # You can convert this to a matrix build if you need cross-platform coverage.
    # See: https://docs.github.com/en/free-pro-team@latest/actions/learn-github-actions/managing-complex-workflows#using-a-build-matrix
    runs-on: ubuntu-latest

    steps:

    - name: install ilmbase
      run: sudo apt-get -y install libilmbase-dev
    
    - name: install openexr
      run: sudo apt-get -y install libopenexr-dev

    - uses: actions/checkout@v4

    - name: Configure CMake
      # Configure CMake in a 'build' subdirectory. `CMAKE_BUILD_TYPE` is only required if you are using a single-configuration generator such as make.
      # See https://cmake.org/cmake/help/latest/variable/CMAKE_BUILD_TYPE.html?highlight=cmake_build_type
      run: cmake -B ${{github.workspace}}/build -DCMAKE_BUILD_TYPE=${{env.BUILD_TYPE}}

    - name: Build
      # Build your program with the given configuration
      run: cmake --build ${{github.workspace}}/build --config ${{env.BUILD_TYPE}}
      
  test-openexr2:
    # The CMake configure and build commands are platform agnostic and should work equally well on Windows or Mac.
    # You can convert this to a matrix build if you need cross-platform coverage.
    # See: https://docs.github.com/en/free-pro-team@latest/actions/learn-github-actions/managing-complex-workflows#using-a-build-matrix
    runs-on: ubuntu-latest

    steps:

    - name: remove ilmbase
      run: sudo apt-get --purge remove libilmbase-dev -y

    - name: remove openexr
      run: sudo apt-get --purge remove libopenexr-dev -y

    - name: install openexr dependency - zlib
      run: sudo apt-get -y install zlib1g-dev

    - name: install CTL dependency - openexr/ilmbase v2.5
      run:  |
        cd ..
        git clone https://github.com/AcademySoftwareFoundation/openexr.git &&
        cd openexr &&
        git checkout RB-2.5 &&
        mkdir build &&
        cd build &&
        cmake .. &&
        make  &&
        sudo make install

    - uses: actions/checkout@v4

    - name: Configure CMake
      # Configure CMake in a 'build' subdirectory. `CMAKE_BUILD_TYPE` is only required if you are using a single-configuration generator such as make.
      # See https://cmake.org/cmake/help/latest/variable/CMAKE_BUILD_TYPE.html?highlight=cmake_build_type
      run: cmake -B ${{github.workspace}}/build -DCMAKE_BUILD_TYPE=${{env.BUILD_TYPE}}

    - name: Build
      # Build your program with the given configuration
      run: cmake --build ${{github.workspace}}/build --config ${{env.BUILD_TYPE}}

    - name: Test
      working-directory: ${{github.workspace}}/build
      run: ctest -V --output-on-failure

  test-openexr3:
    # The CMake configure and build commands are platform agnostic and should work equally well on Windows or Mac.
    # You can convert this to a matrix build if you need cross-platform coverage.
    # See: https://docs.github.com/en/free-pro-team@latest/actions/learn-github-actions/managing-complex-workflows#using-a-build-matrix
    runs-on: ubuntu-latest

    steps:

    - name: remove ilmbase
      run: sudo apt-get --purge remove libilmbase-dev -y

    - name: remove openexr
      run: sudo apt-get --purge remove libopenexr-dev -y

    - name: install dependencies - imath
      run:  |
        cd ..
        git clone https://github.com/AcademySoftwareFoundation/Imath.git &&
        cd Imath &&
        mkdir build &&
        cd build &&
        cmake .. &&
        make &&
        sudo make install

    - name: install dependencies - zlib
      run: sudo apt-get -y install zlib1g-dev

    - name: install dependencies - openexr v3.1
      run:  |
        cd ..
        git clone https://github.com/AcademySoftwareFoundation/openexr.git &&
        cd openexr &&
        git checkout RB-3.1 &&
        mkdir build &&
        cd build &&
        cmake .. -DBUILD_TESTING=OFF -DOPENEXR_BUILD_TOOLS=OFF -DOPENEXR_INSTALL_EXAMPLES=OFF &&
        make  &&
        sudo make install

    - uses: actions/checkout@v4

    - name: Configure CMake
      # Configure CMake in a 'build' subdirectory. `CMAKE_BUILD_TYPE` is only required if you are using a single-configuration generator such as make.
      # See https://cmake.org/cmake/help/latest/variable/CMAKE_BUILD_TYPE.html?highlight=cmake_build_type
      run: cmake -B ${{github.workspace}}/build -DCMAKE_BUILD_TYPE=${{env.BUILD_TYPE}}

    - name: Build
      # Build your program with the given configuration
      run: cmake --build ${{github.workspace}}/build --config ${{env.BUILD_TYPE}}

    - name: Test
      working-directory: ${{github.workspace}}/build
      run: ctest -V --output-on-failure
  
  test-openexr3-static:
    # The CMake configure and build commands are platform agnostic and should work equally well on Windows or Mac.
    # You can convert this to a matrix build if you need cross-platform coverage.
    # See: https://docs.github.com/en/free-pro-team@latest/actions/learn-github-actions/managing-complex-workflows#using-a-build-matrix
    runs-on: ubuntu-latest

    steps:

    - name: remove ilmbase
      run: sudo apt-get --purge remove libilmbase-dev -y

    - name: remove openexr
      run: sudo apt-get --purge remove libopenexr-dev -y

    - name: install dependencies - imath
      run:  |
        cd ..
        git clone https://github.com/AcademySoftwareFoundation/Imath.git &&
        cd Imath &&
        mkdir build &&
        cd build &&
        cmake -DBUILD_SHARED_LIBS=OFF .. &&
        make &&
        sudo make install

    - name: install dependencies - zlib
      run: sudo apt-get -y install zlib1g-dev

    - name: install dependencies - openexr v3.1
      run:  |
        cd ..
        git clone https://github.com/AcademySoftwareFoundation/openexr.git &&
        cd openexr &&
        git checkout RB-3.1 &&
        mkdir build &&
        cd build &&
        cmake ..  -DBUILD_SHARED_LIBS=OFF -DBUILD_TESTING=OFF -DOPENEXR_BUILD_TOOLS=OFF -DOPENEXR_INSTALL_EXAMPLES=OFF &&
        make  &&
        sudo make install

    - uses: actions/checkout@v4

    - name: Configure CMake
      # Configure CMake in a 'build' subdirectory. `CMAKE_BUILD_TYPE` is only required if you are using a single-configuration generator such as make.
      # See https://cmake.org/cmake/help/latest/variable/CMAKE_BUILD_TYPE.html?highlight=cmake_build_type
      run: cmake -B ${{github.workspace}}/build -DCMAKE_BUILD_TYPE=${{env.BUILD_TYPE}}  -DBUILD_SHARED_LIBS=OFF

    - name: Build
      # Build your program with the given configuration
      run: cmake --build ${{github.workspace}}/build --config ${{env.BUILD_TYPE}}

    - name: Test
      working-directory: ${{github.workspace}}/build
      run: ctest -V --output-on-failure

  test-openexr3-shared:
    # The CMake configure and build commands are platform agnostic and should work equally well on Windows or Mac.
    # You can convert this to a matrix build if you need cross-platform coverage.
    # See: https://docs.github.com/en/free-pro-team@latest/actions/learn-github-actions/managing-complex-workflows#using-a-build-matrix
    runs-on: ubuntu-latest

    steps:

    - name: remove ilmbase
      run: sudo apt-get --purge remove libilmbase-dev -y

    - name: remove openexr
      run: sudo apt-get --purge remove libopenexr-dev -y

    - name: install dependencies - imath
      run:  |
        cd ..
        git clone https://github.com/AcademySoftwareFoundation/Imath.git &&
        cd Imath &&
        mkdir build &&
        cd build &&
        cmake -DBUILD_SHARED_LIBS=ON .. &&
        make &&
        sudo make install

    - name: install dependencies - zlib
      run: sudo apt-get -y install zlib1g-dev

    - name: install dependencies - openexr v3.1
      run:  |
        cd ..
        git clone https://github.com/AcademySoftwareFoundation/openexr.git &&
        cd openexr &&
        git checkout RB-3.1 &&
        mkdir build &&
        cd build &&
        cmake ..  -DBUILD_SHARED_LIBS=ON -DBUILD_TESTING=OFF -DOPENEXR_BUILD_TOOLS=OFF -DOPENEXR_INSTALL_EXAMPLES=OFF &&
        make  &&
        sudo make install

    - uses: actions/checkout@v4

    - name: Configure CMake
      # Configure CMake in a 'build' subdirectory. `CMAKE_BUILD_TYPE` is only required if you are using a single-configuration generator such as make.
      # See https://cmake.org/cmake/help/latest/variable/CMAKE_BUILD_TYPE.html?highlight=cmake_build_type
      run: cmake -B ${{github.workspace}}/build -DCMAKE_BUILD_TYPE=${{env.BUILD_TYPE}}  -DBUILD_SHARED_LIBS=ON

    - name: Build
      # Build your program with the given configuration
      run: cmake --build ${{github.workspace}}/build --config ${{env.BUILD_TYPE}}

    - name: Test
      working-directory: ${{github.workspace}}/build
      run: ctest -V --output-on-failure

  valgrind-openexr2:
    # The CMake configure and build commands are platform agnostic and should work equally well on Windows or Mac.
    # You can convert this to a matrix build if you need cross-platform coverage.
    # See: https://docs.github.com/en/free-pro-team@latest/actions/learn-github-actions/managing-complex-workflows#using-a-build-matrix
    runs-on: ubuntu-latest

    steps:
    - name: run apt-get update
      run: sudo apt-get -y update

    - name: install test tool - valgrind
      run: sudo apt-get -y install valgrind

    - name: remove ilmbase
      run: sudo apt-get --purge remove libilmbase-dev -y

    - name: remove openexr
      run: sudo apt-get --purge remove libopenexr-dev -y

    - name: install openexr dependency - zlib
      run: sudo apt-get -y install zlib1g-dev

    - name: install CTL dependency - openexr/ilmbase v2.5
      run:  |
        cd ..
        git clone https://github.com/AcademySoftwareFoundation/openexr.git &&
        cd openexr &&
        git checkout RB-2.5 &&
        mkdir build &&
        cd build &&
        cmake .. &&
        make  &&
        sudo make install

    - uses: actions/checkout@v4

    - name: Configure CMake
      # Configure CMake in a 'build' subdirectory. `CMAKE_BUILD_TYPE` is only required if you are using a single-configuration generator such as make.
      # See https://cmake.org/cmake/help/latest/variable/CMAKE_BUILD_TYPE.html?highlight=cmake_build_type
      run: cmake -B ${{github.workspace}}/build -DCMAKE_BUILD_TYPE=${{env.BUILD_TYPE}}

    - name: Build
      # Build your program with the given configuration
      run: | 
        cd ${{ github.workspace }}
        cmake --build ${{github.workspace}}/build --config ${{env.BUILD_TYPE}}
    
    - name: Run Valgrind on unit tests
      working-directory: ${{github.workspace}}/build
      # Run valgrind using a bash script  
      run: pwd && ls && bash ../resources/test/scripts/run_valgrind.sh    

  valgrind-openexr3:
    # The CMake configure and build commands are platform agnostic and should work equally well on Windows or Mac.
    # You can convert this to a matrix build if you need cross-platform coverage.
    # See: https://docs.github.com/en/free-pro-team@latest/actions/learn-github-actions/managing-complex-workflows#using-a-build-matrix
    runs-on: ubuntu-latest

    steps:
    - name: run apt-get update
      run: sudo apt-get -y update
      
    - name: install test tool - valgrind
      run: sudo apt-get -y install valgrind

    - name: remove ilmbase
      run: sudo apt-get --purge remove libilmbase-dev -y

    - name: remove openexr
      run: sudo apt-get --purge remove libopenexr-dev -y

    - name: install openexr dependency - zlib
      run: sudo apt-get -y install zlib1g-dev

    - name: install openexr + CTL dependency - imath
      run:  |
        cd ..
        git clone https://github.com/AcademySoftwareFoundation/Imath.git &&
        cd Imath &&
        mkdir build &&
        cd build &&
        cmake .. &&
        make &&
        sudo make install

    - name: install CTL dependency - openexr v3.1
      run:  |
        cd ..
        sudo apt-get -y install zlib1g-dev &&
        git clone https://github.com/AcademySoftwareFoundation/openexr.git &&
        cd openexr &&
        git checkout RB-3.1 &&
        mkdir build &&
        cd build &&
        cmake .. -DBUILD_TESTING=OFF -DOPENEXR_BUILD_TOOLS=OFF -DOPENEXR_INSTALL_EXAMPLES=OFF &&
        make  &&
        sudo make install

    - uses: actions/checkout@v4

    - name: Configure CMake
      # Configure CMake in a 'build' subdirectory. `CMAKE_BUILD_TYPE` is only required if you are using a single-configuration generator such as make.
      # See https://cmake.org/cmake/help/latest/variable/CMAKE_BUILD_TYPE.html?highlight=cmake_build_type
      run: cmake -B ${{github.workspace}}/build -DCMAKE_BUILD_TYPE=${{env.BUILD_TYPE}}

    - name: Build
      # Build your program with the given configuration
      run: | 
        cd ${{ github.workspace }}
        cmake --build ${{github.workspace}}/build --config ${{env.BUILD_TYPE}}

    #- name: Make unit tests
    #  working-directory: ${{github.workspace}}/build
    #  run: make check 
    
    - name: Run Valgrind on unit tests
      working-directory: ${{github.workspace}}/build
      # Run valgrind using a bash script  
      run: pwd && ls && bash ../resources/test/scripts/run_valgrind.sh