Skip to content

Latest commit

 

History

History
134 lines (98 loc) · 4.05 KB

BuildWithDocker.md

File metadata and controls

134 lines (98 loc) · 4.05 KB
Raw

Build from sources using Docker

Prerequisites

  • For this method you only need to install Docker on your machine.
  • Ensure that you have sufficient memory allocated to the Virtual Machine (VM) as per our system requirements. Refer to this Docker guide for setting CPU cores and memory limits.

:::{Warning} The build_openroad.sh will use the host number of CPUs to compile openroad.

Please check your Docker daemon setup to make sure all host CPUs are available. If you are not sure, you can check with the command below. If the output number is different from the number of CPUs from your machine, then is recommended that you restrict the number of CPUs used by the scripts (see instructions below). :::

docker run --rm ubuntu:22.04 nproc

Build Using Docker from pre-built binaries

Courtesy of Precision Innovations, they release .deb installers of OpenROAD for Ubuntu and Debian on a regular basis. This greatly helps to reduce the compilation time needed.

We recommend to use a Docker image of a supported OS and install OpenROAD using the prebuilt binaries from Precision Innovations. You can start the container in an interactive mode using the command below.

docker run -it ubuntu:22.04

Now you are ready to install the prebuilt binaries. Please refer to the instructions for installing prebuilt binaries here.

Build Using Docker from sources

Alternatively, if you would like the latest commits from the OpenROAD repositories, do follow the instructions below.

Clone and Build

The following instructions build the docker image with Ubuntu 22.04 as the base OS:

git clone --recursive https://github.com/The-OpenROAD-Project/OpenROAD-flow-scripts
cd OpenROAD-flow-scripts
./build_openroad.sh

You can restrict the number of CPUs with the -t|--threads N argument:

./build_openroad.sh --threads N

Verify Installation

The binaries are only available from inside a Docker container. Here is an example of starting a container from the created Docker image.

docker run --rm -it -u $(id -u ${USER}):$(id -g ${USER}) -v $(pwd)/flow:/OpenROAD-flow-scripts/flow openroad/flow-ubuntu22-builder

Then, inside docker:

source ./env.sh
yosys -help
openroad -help
cd flow
make
exit

Enable GUI support

To use the GUI feature you will need to start the docker with the following command,

For Ubuntu/Debian OS users:

docker run --rm -it \
           -u $(id -u ${USER}):$(id -g ${USER}) \
           -v $(pwd)/flow:/OpenROAD-flow-scripts/flow \
           -e DISPLAY=${DISPLAY} \
           -v /tmp/.X11-unix:/tmp/.X11-unix \
           -v ${HOME}/.Xauthority:/.Xauthority \
           --network host \
           --security-opt seccomp=unconfined \
           openroad/flow-$OS_NAME-builder

Running GUI with Docker on Mac OS X users, refer here.

Then use:

docker run --rm -it -e DISPLAY=<IP_LIKE_FROM_TUTORIAL>:0 --network host --privileged <IMAGE_NAME>

Docker Shell Utility

Alternatively, use docker_shell to automate the above commands using the user's parameters. Do refer to the documentation here.

Build Docker Image for Different OS

The following instructions build the docker image with a parameterized OS in two stages. These are for CI and developers that wish to use an OS other than Ubuntu 22.04; regular users should use the steps from previous sections. The dev stage installs all dependencies and packages required to run OpenROAD and OpenROAD Flow Scripts. The build stage generates all binaries needed to run the flow (i.e., openroad and yosys).

git clone --recursive https://github.com/The-OpenROAD-Project/OpenROAD-flow-scripts
cd OpenROAD-flow-scripts
./etc/DockerHelper.sh create -target=dev -os=$OS_NAME
./etc/DockerHelper.sh create -target=builder -os=$OS_NAME