Control and monitor the EM 6000, EM 6000 Dante and L 6000 via Sennheiser Sound Control Protocol (UDP).
- Antenna Booster
- Audio Output Level
- Display Brightness
- Identify
- Reciever Bank & Channel
- Reciever Carrier Frequency
- Reciever Encryption
- Reciever Mute
- Reciever Name
- Transmitter Sync Settings
- Identify
Advanced Feedbacks
- Reciever Status
RF Meters (Yellow) range -100dBm to -50dBm. RF A always on top/left side regardless of orientation. Includes Diversity & Peak LEDs.
LQI Meter (Blue) range 0% to 100%
AF meter (Tri-colour) range -50dBFS to 0dBFS. Includes Signal Presence ( > -100dBFS ) and Peak LEDs.
Boolean Feedbacks
- AF Peak
- Audio Mute
- Active Status
- Active Warning
- Booster
- Clock Source
- Diversity
- Encryption
- RF Peak
- Test Tone Active
Advanced Feedbacks
- Battery Status
Boolean Feedbacks
- Device Hot
- Fan Warning
- Slot Warning
Device
- Name
- Version
Output
- Level
Recieve Channel
- Active Bank
- Active Channel
- Carrier Frequency
- Name
- Test Tone Level
- RF 1 Level
- RF 2 Level
- AF Level
- LQI
SKX Transmitter
- Battery - Percent
- Battery - Time
- Capsule, Gain
- Limit - Low
- Limit - High
- Lowcut
- Name
- Type
System
- Brightness
- Clock
- Clock Frequency
Device
- Name
- Version
Battery Slot
- LED
- LED Meaning
- Type
Battery
- Capacity
- Current
- Cycle Count
- Energy
- Operating Time (H)
- Operating Time (Min)
- State of Charge
- State of Health
- Temperature
- Voltage
- Time to Full (H)
- Time to Full (Min)
- Reciever Status
- Battery Status
- Device Status
The following controls or feedbacks are not supported by the SSC API.
- Transmission Mode (LR, LD)
- Command Mode
- Tx Sync Settings: Name, Power LED Mode, RF Power.
Initial Release