- Introduction
- Writing Job Classes
- Pushing Jobs Onto The Queue
- Running The Queue Listener
- Dealing With Failed Jobs
The Laravel queue service provides a unified API across a variety of different queue back-ends. Queues allow you to defer the processing of a time consuming task, such as sending an e-mail, until a later time which drastically speeds up web requests to your application.
The queue configuration file is stored in config/queue.php. In this file you will find connection configurations for each of the queue drivers that are included with the framework, which includes a database, Beanstalkd, Amazon SQS, Redis, and synchronous (for local use) driver.
A null queue driver is also included which simply discards queued jobs.
In order to use the database queue driver, you will need a database table to hold the jobs. To generate a migration that creates this table, run the queue:table Artisan command. Once the migration is created, you may migrate your database using the migrate command:
php artisan queue:table
php artisan migrate
The following dependencies are needed for the listed queue drivers:
- Amazon SQS:
aws/aws-sdk-php ~3.0 - Beanstalkd:
pda/pheanstalk ~3.0 - Redis:
predis/predis ~1.0
By default, all of the queueable jobs for your application are stored in the app/Jobs directory. You may generate a new queued job using the Artisan CLI:
php artisan make:job SendReminderEmail
This command will generate a new class in the app/Jobs directory, and the class will implement the Illuminate\Contracts\Queue\ShouldQueue interface, indicating to Laravel that the job should be pushed onto the queue instead of run synchronously.
Job classes are very simple, normally containing only a handle method which is called when the job is processed by the queue. To get started, let's take a look at an example job class:
<?php
namespace App\Jobs;
use App\User;
use App\Jobs\Job;
use Illuminate\Contracts\Mail\Mailer;
use Illuminate\Queue\SerializesModels;
use Illuminate\Queue\InteractsWithQueue;
use Illuminate\Contracts\Queue\ShouldQueue;
class SendReminderEmail extends Job implements ShouldQueue
{
use InteractsWithQueue, SerializesModels;
protected $user;
/**
* Create a new job instance.
*
* @param User $user
* @return void
*/
public function __construct(User $user)
{
$this->user = $user;
}
/**
* Execute the job.
*
* @param Mailer $mailer
* @return void
*/
public function handle(Mailer $mailer)
{
$mailer->send('emails.reminder', ['user' => $this->user], function ($m) {
//
});
$this->user->reminders()->create(...);
}
}
In this example, note that we were able to pass an Eloquent model directly into the queued job's constructor. Because of the SerializesModels trait that the job is using, Eloquent models will be gracefully serialized and unserialized when the job is processing. If your queued job accepts an Eloquent model in its constructor, only the identifier for the model will be serialized onto the queue. When the job is actually handled, the queue system will automatically re-retrieve the full model instance from the database. It's all totally transparent to your application and prevents issues that can arise from serializing full Eloquent model instances.
The handle method is called when the job is processed by the queue. Note that we are able to type-hint dependencies on the handle method of the job. The Laravel service container automatically injects these dependencies.
If an exception is thrown while the job is being processed, it will automatically be released back onto the queue so it may be attempted again. The job will continue to be released until it has been attempted the maximum number of times allowed by your application. The number of maximum attempts is defined by the --tries switch used on the queue:listen or queue:work Artisan jobs. More information on running the queue listener can be found below.
If you would like to release the job manually, the InteractsWithQueue trait, which is already included in your generated job class, provides access to the queue job release method. The release method accepts one argument: the number of seconds you wish to wait until the job is made available again:
public function handle(Mailer $mailer)
{
if (condition) {
$this->release(10);
}
}
As noted above, if an exception occurs while the job is being processed, it will automatically be released back onto the queue. You may check the number of attempts that have been made to run the job using the attempts method:
public function handle(Mailer $mailer)
{
if ($this->attempts() > 3) {
//
}
}
The default Laravel controller located in app/Http/Controllers/Controller.php uses a DispatchesJobs trait. This trait provides several methods allowing you to conveniently push jobs onto the queue, such as the dispatch method:
<?php
namespace App\Http\Controllers;
use App\User;
use Illuminate\Http\Request;
use App\Jobs\SendReminderEmail;
use App\Http\Controllers\Controller;
class UserController extends Controller
{
/**
* Send a reminder e-mail to a given user.
*
* @param Request $request
* @param int $id
* @return Response
*/
public function sendReminderEmail(Request $request, $id)
{
$user = User::findOrFail($id);
$this->dispatch(new SendReminderEmail($user));
}
}
Of course, sometimes you may wish to dispatch a job from somewhere in your application besides a route or controller. For that reason, you can include the DispatchesJobs trait on any of the classes in your application to gain access to its various dispatch methods. For example, here is a sample class that uses the trait:
<?php
namespace App;
use Illuminate\Foundation\Bus\DispatchesJobs;
class ExampleClass
{
use DispatchesJobs;
}
Or, you may use the dispatch global function:
Route::get('/job', function () {
dispatch(new App\Jobs\PerformTask);
return 'Done!';
});
You may also specify the queue a job should be sent to.
By pushing jobs to different queues, you may "categorize" your queued jobs, and even prioritize how many workers you assign to various queues. This does not push jobs to different queue "connections" as defined by your queue configuration file, but only to specific queues within a single connection. To specify the queue, use the onQueue method on the job instance. The onQueue method is provided by the Illuminate\Bus\Queueable trait, which is already included on the App\Jobs\Job base class:
<?php
namespace App\Http\Controllers;
use App\User;
use Illuminate\Http\Request;
use App\Jobs\SendReminderEmail;
use App\Http\Controllers\Controller;
class UserController extends Controller
{
/**
* Send a reminder e-mail to a given user.
*
* @param Request $request
* @param int $id
* @return Response
*/
public function sendReminderEmail(Request $request, $id)
{
$user = User::findOrFail($id);
$job = (new SendReminderEmail($user))->onQueue('emails');
$this->dispatch($job);
}
}
Sometimes you may wish to delay the execution of a queued job. For instance, you may wish to queue a job that sends a customer a reminder e-mail 5 minutes after sign-up. You may accomplish this using the delay method on your job class, which is provided by the Illuminate\Bus\Queueable trait:
<?php
namespace App\Http\Controllers;
use App\User;
use Illuminate\Http\Request;
use App\Jobs\SendReminderEmail;
use App\Http\Controllers\Controller;
class UserController extends Controller
{
/**
* Send a reminder e-mail to a given user.
*
* @param Request $request
* @param int $id
* @return Response
*/
public function sendReminderEmail(Request $request, $id)
{
$user = User::findOrFail($id);
$job = (new SendReminderEmail($user))->delay(60 * 5);
$this->dispatch($job);
}
}
In this example, we're specifying that the job should be delayed in the queue for 5 minutes before being made available to workers.
Note: The Amazon SQS service has a maximum delay time of 15 minutes.
The Queue::before and Queue::after methods allow you to register a callback to be executed before a queued job is started or when it executes successfully. The callbacks are great opportunity to perform additional logging, queue a subsequent job, or increment statistics for a dashboard. For example, we may attach a callback to this event from the AppServiceProvider that is included with Laravel:
<?php
namespace App\Providers;
use Queue;
use Illuminate\Support\ServiceProvider;
use Illuminate\Queue\Events\JobProcessed;
class AppServiceProvider extends ServiceProvider
{
/**
* Bootstrap any application services.
*
* @return void
*/
public function boot()
{
Queue::after(function (JobProcessed $event) {
// $event->connectionName
// $event->job
// $event->data
});
}
/**
* Register the service provider.
*
* @return void
*/
public function register()
{
//
}
}
Laravel includes an Artisan command that will run new jobs as they are pushed onto the queue. You may run the listener using the queue:listen command:
php artisan queue:listen
You may also specify which queue connection the listener should utilize:
php artisan queue:listen connection
Note that once this task has started, it will continue to run until it is manually stopped. You may use a process monitor such as Supervisor to ensure that the queue listener does not stop running.
You may pass a comma-delimited list of queue connections to the listen job to set queue priorities:
php artisan queue:listen --queue=high,low
In this example, jobs on the high queue will always be processed before moving onto jobs from the low queue.
You may also set the length of time (in seconds) each job should be allowed to run:
php artisan queue:listen --timeout=60
In addition, you may specify the number of seconds to wait before polling for new jobs:
php artisan queue:listen --sleep=5
Note that the queue only "sleeps" if no jobs are on the queue. If more jobs are available, the queue will continue to work them without sleeping.
To process only the first job on the queue, you may use the queue:work command:
php artisan queue:work
Supervisor is a process monitor for the Linux operating system, and will automatically restart your queue:listen or queue:work commands if they fail. To install Supervisor on Ubuntu, you may use the following command:
sudo apt-get install supervisor
Supervisor configuration files are typically stored in the /etc/supervisor/conf.d directory. Within this directory, you may create any number of configuration files that instruct supervisor how your processes should be monitored. For example, let's create a laravel-worker.conf file that starts and monitors a queue:work process:
[program:laravel-worker]
process_name=%(program_name)s_%(process_num)02d
command=php /home/forge/app.com/artisan queue:work sqs --sleep=3 --tries=3 --daemon
autostart=true
autorestart=true
user=forge
numprocs=8
redirect_stderr=true
stdout_logfile=/home/forge/app.com/worker.log
In this example, the numprocs directive will instruct Supervisor to run 8 queue:work processes and monitor all of them, automatically restarting them if they fail. Of course, you should change the queue:work sqs portion of the command directive to reflect your chosen queue driver.
Once the configuration file has been created, you may update the Supervisor configuration and start the processes using the following commands:
sudo supervisorctl reread
sudo supervisorctl update
sudo supervisorctl start laravel-worker:*
For more information on configuring and using Supervisor, consult the Supervisor documentation. Alternatively, you may use Laravel Forge to automatically configure and manage your Supervisor configuration from a convenient web interface.
The queue:work Artisan command includes a --daemon option for forcing the queue worker to continue processing jobs without ever re-booting the framework. This results in a significant reduction of CPU usage when compared to the queue:listen command:
To start a queue worker in daemon mode, use the --daemon flag:
php artisan queue:work connection --daemon
php artisan queue:work connection --daemon --sleep=3
php artisan queue:work connection --daemon --sleep=3 --tries=3
As you can see, the queue:work job supports most of the same options available to queue:listen. You may use the php artisan help queue:work job to view all of the available options.
Daemon queue workers do not restart the framework before processing each job. Therefore, you should be careful to free any heavy resources before your job finishes. For example, if you are doing image manipulation with the GD library, you should free the memory with imagedestroy when you are done.
Similarly, your database connection may disconnect when being used by a long-running daemon. You may use the DB::reconnect method to ensure you have a fresh connection.
Since daemon queue workers are long-lived processes, they will not pick up changes in your code without being restarted. So, the simplest way to deploy an application using daemon queue workers is to restart the workers during your deployment script. You may gracefully restart all of the workers by including the following command in your deployment script:
php artisan queue:restart
This command will gracefully instruct all queue workers to restart after they finish processing their current job so that no existing jobs are lost.
Note: This command relies on the cache system to schedule the restart. By default, APCu does not work for CLI jobs. If you are using APCu, add
apc.enable_cli=1to your APCu configuration.
Since things don't always go as planned, sometimes your queued jobs will fail. Don't worry, it happens to the best of us! Laravel includes a convenient way to specify the maximum number of times a job should be attempted. After a job has exceeded this amount of attempts, it will be inserted into a failed_jobs table. The name of the table can be configured via the config/queue.php configuration file.
To create a migration for the failed_jobs table, you may use the queue:failed-table command:
php artisan queue:failed-table
When running your queue listener, you may specify the maximum number of times a job should be attempted using the --tries switch on the queue:listen command:
php artisan queue:listen connection-name --tries=3
If you would like to register an event that will be called when a queued job fails, you may use the Queue::failing method. This event is a great opportunity to notify your team via e-mail or HipChat. For example, we may attach a callback to this event from the AppServiceProvider that is included with Laravel:
<?php
namespace App\Providers;
use Queue;
use Illuminate\Queue\Events\JobFailed;
use Illuminate\Support\ServiceProvider;
class AppServiceProvider extends ServiceProvider
{
/**
* Bootstrap any application services.
*
* @return void
*/
public function boot()
{
Queue::failing(function (JobFailed $event) {
// $event->connectionName
// $event->job
// $event->data
});
}
/**
* Register the service provider.
*
* @return void
*/
public function register()
{
//
}
}
For more granular control, you may define a failed method directly on a queue job class, allowing you to perform job specific actions when a failure occurs:
<?php
namespace App\Jobs;
use App\Jobs\Job;
use Illuminate\Contracts\Mail\Mailer;
use Illuminate\Queue\SerializesModels;
use Illuminate\Queue\InteractsWithQueue;
use Illuminate\Contracts\Queue\ShouldQueue;
class SendReminderEmail extends Job implements ShouldQueue
{
use InteractsWithQueue, SerializesModels;
/**
* Execute the job.
*
* @param Mailer $mailer
* @return void
*/
public function handle(Mailer $mailer)
{
//
}
/**
* Handle a job failure.
*
* @return void
*/
public function failed()
{
// Called when the job is failing...
}
}
To view all of your failed jobs that have been inserted into your failed_jobs database table, you may use the queue:failed Artisan command:
php artisan queue:failed
The queue:failed command will list the job ID, connection, queue, and failure time. The job ID may be used to retry the failed job. For instance, to retry a failed job that has an ID of 5, the following command should be issued:
php artisan queue:retry 5
To retry all of your failed jobs, use queue:retry with all as the ID:
php artisan queue:retry all
If you would like to delete a failed job, you may use the queue:forget command:
php artisan queue:forget 5
To delete all of your failed jobs, you may use the queue:flush command:
php artisan queue:flush