Skip to content

Latest commit

 

History

History
67 lines (46 loc) · 3.31 KB

README.md

File metadata and controls

67 lines (46 loc) · 3.31 KB
Raw

PiHud

Configurable heads up display fit for the Raspberry Pi

Warning: This project is mostly for experimenting with the underlying OBD library.

Turning your Pi into a PiHud

For installation instructions on different platforms, see the GitHub wiki

First, it is recommended that you start with a clean install of Raspbian. On first boot, it will prompt you with a setup screen. After you have expanded the filesystem and set your password, enter the listing named Enable Boot to Desktop/Scratch. In this option, make sure to select the console only option, in order to prevent the Pi from starting its desktop environment on boot Console Text console, requiring login. You can now click finish, and boot your Pi.

After loging in, you will be presented with a terminal. Please install the following dependencies, and clone the repo

sudo apt-get install python-qt4
sudo apt-get install python-pip
git clone https://github.com/brendan-w/piHud.git pihud
cd pihud/
sudo python setup.py install

In order to run PiHud on boot, you will need to tweak a few config files (note: most of the following was taken from this post). Open the file /etc/rc.local in a text editor of your choice. Add the following line just before the exit 0

su -s /bin/bash -c startx pi &

Now, in order to allow X sessions for all users, run the following command, and choose Anybody from the list of options

sudo dpkg-reconfigure x11-common

Finally, create an .xinitrc file (if you don’t have one already), in your home directory

touch ~/.xinitrc

Open it in a text editor of your choice, and add the following line:

python -m piHud

Your done! You can now reboot the Pi with:

sudo shutdown -r 0

Configuring

PiHud is configured by modifying a file named pihud.rc in your home directory. This file will be created the first time piHud runs. However, a few settings are accessable through the piHud app itself. To move widgets, simply click and drag them around the screen. Right clicking on widgets will tell you which sensor they are tied to, and allow you to delete them. Right clicking on the black background (not on a widget), will let you add widgets or pages to your HUD. By default, page switching can be done with the TAB key.

All other settings are available in the pihud.rc file, which is structured in json. A few items of note in this file:

  • The sensor field is the string name for any sensor your car supports. A full list can be found in the python-OBD wiki
  • The type field selects the way data is displayed. Values can be: Gauge, Bar, or Text.
  • All color attributes accept CSS color values
  • The page_adv_pin setting is used to tie the page cycling to any of the Pi’s GPIO pins. Simply wire a button that grounds the set pin while pressed.
  • The demo key is used to feed a sin() curve into all widgets for testing.
  • The debug key is used to turn python-OBD's debug printing on and off. If enabled, you will see OBD debug information being printed to stderr.