:mkuts

echo ""
echo ""
echo "			Copyright (c) 1984, 1986, 1987, 1988 AT&T"
echo "			  All Rights Reserved"
echo ""
echo "          THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF AT&T"
echo "       The copyright notice above does not evidence any actual or"
echo "               intended publication of such source code."
echo ""
echo "			Copyright (c) 1987, 1988 Microsoft Corporation"
echo "			  All Rights Reserved"
echo ""
echo "		This Module contains Proprietary Information of Microsoft"
echo "		Corporation and should be treated as Confidential."
echo ""
echo ""
echo ""

#ident	"@(#)mk::mkuts	1.15.1.4"

#
#	Configure and make the UNIX Operating System with various devices
#

#	Determine the CCSTYPE being used
${PFX}cc -V 2>&1 | grep 5.0 > /dev/null
if [ $? -eq 0 ]
then
	CCSTYPE=ELF
else
	CCSTYPE=COFF
fi
export CCSTYPE
echo 
echo ====================== CCSTYPE  is  $CCSTYPE =========================
echo

SHELL=/bin/sh
REL=
VER=
export SHELL REL VER 
echo $0: started at `date`
trap "exit 1" 1 2 3 15
MAKE=${MAKE:-make}
SRCDIR=${SRC:-$ROOT/usr/src}/uts
if vax
then
#	configure an OS with the general disk/general tape (gdgt) and the
#	general disk/TS11 tape drive (gdts) units.
#	Note that the general disk/TU16 tape with TM02 controller (gdht)
#	is not configured or tested here.
	cd $SRCDIR/vax/cf
	for i in gdgt gdts
	do
		echo "config $i \n$MAKE install VER=$i"
		config $i
		$MAKE install VER=$i
		if [ $? -ne 0 ]
		then
			echo ":mkuts: *** $MAKE of $i failed"
		fi
	done
elif pdp11
then
#	configure an OS with the general disk and rp disks
	cd $SRCDIR/pdp11/cf
	for i in gdht gdtm rpht rptm
	do
                echo "config $i \n$MAKE install VER=$i"
		config $i
		$MAKE install VER=$i
                if [ $? -ne 0 ]
                then
                        echo ":mkuts: *** $MAKE of $i failed"
                fi
	done
elif u3b
then
#	configure an OS with the Kennedy tape drive (un32) and the
#	magnetic tape controller configured into DMA channels 11 and 12.
	cd $SRCDIR/3b/cf
	for i in un32 mtc11 mtc12
	do
		echo "$MAKE clobber"
		$MAKE clobber
                echo "config /etc/system.$i"
		config $ROOT/etc/system.$i
		if [ "$ROOT" != "" ]
		then
			$MAKE -f ../makefile ENV="VER=$i CH=# SGS=3bs"
		else
			$MAKE VER=$i
		fi
		if [ $? -eq 0 ]
		then
			mv ../unix$i $ROOT/unix.$i
		else
			echo ":mkuts: *** $MAKE of unix.$i failed"
		fi
	done
elif u3b2
then
#
	cd $SRCDIR/3b2
	echo "$MAKE -f unix.mk install SYS=unix"
	$MAKE -f unix.mk install SYS=unix
	if [ $? -ne 0 ]
	then
		echo ":mkuts: *** $MAKE of unix failed"
	fi
elif u3b5
then
#
	cd $SRCDIR/3b5
	echo "$MAKE -f unix.mk install SYS=unix VER=2"
	$MAKE -f unix.mk install SYS=unix VER=2
        if [ $? -ne 0 ]
        then
                echo ":mkuts: *** $MAKE of unix failed"
        fi
elif i286
then
	#
	#	Make the Safari 5 core and driver modules for
	#	Installable Drivers and Tunable Parameters (ID/TP)
	#
	echo "ROOT is set to" $ROOT
	unset C N
	C=install
	
	if [ $# != 0 ]
	then
	
	if [ $1 = "?" ]
	then
	echo
	echo ":mkuts [SYS=s] [VER=v] [REL=r] [NODE=n] [MACH=m] [IM=W|F [DEN=HI|LO]]"
	echo ":mkuts clean"
	echo ":mkuts clobber"
	echo
	exit 0
	fi
	
	if [ $1 = clean ]
	then echo "make clean"
	C=clean
	elif [ $1 = clobber ]
	then echo "make clobber"
	C=clobber
	elif [ $1 = test ]
	then echo "make test"
	exit 0
	else
	N=$@
	fi
	fi
	
	if [ "$MACHINE" = "" ]
	then
		MACHINE=safari
	fi
	if [ "$MACHINE" != "safari" -a "$MACHINE" != "pcat" ]
	then
		Unknown Machine
		exit 0
	fi
	if [ "$C" = "install" ]
	then
		echo Building a $MACHINE kernel

		#
		# make directories
		#
		
		if [ ! -d $ROOT/etc ]
		then mkdir $ROOT/etc
		fi
		if [ ! -d $ROOT/etc/conf ]
		then mkdir $ROOT/etc/conf
		fi
	fi

	set -e
	cd $ROOT/usr/src/uts/i286
	make -f unix.mk $C $N MACHINE=$MACHINE
	
elif i386
then
#       Configure an OS for the 80386, either Multibus or ATbus(default).
#
	ROOT=${ROOT:-`cd ../..;pwd`}
	SRCDIR=${SRC:-$ROOT/usr/src}/uts
	export ROOT

#	Put directories in object build tree.
#
	if [ ! -d $ROOT/etc ]
	then mkdir $ROOT/etc
	fi
	if [ ! -d $ROOT/etc/conf ]
	then mkdir $ROOT/etc/conf
	fi
	if [ ! -d $ROOT/etc/conf/bin ]
	then mkdir $ROOT/etc/conf/bin
	fi
	if [ ! -d $ROOT/etc/conf/cf.d ]
	then mkdir $ROOT/etc/conf/cf.d
	fi
	if [ ! -d $ROOT/etc/conf/sdevice.d ]
	then mkdir $ROOT/etc/conf/sdevice.d
	fi
	if [ ! -d $ROOT/etc/conf/pack.d ]
	then mkdir $ROOT/etc/conf/pack.d
	fi
	if [ ! -d $ROOT/etc/conf/node.d ]
	then mkdir $ROOT/etc/conf/node.d
	fi
	if [ ! -d $ROOT/etc/conf/rc.d ]
	then mkdir $ROOT/etc/conf/rc.d
	fi
	if [ ! -d $ROOT/etc/conf/sd.d ]
	then mkdir $ROOT/etc/conf/sd.d
	fi
	if [ ! -d $ROOT/etc/conf/init.d ]
	then mkdir $ROOT/etc/conf/init.d
	fi
	if [ ! -d $ROOT/etc/conf/mfsys.d ]
	then mkdir $ROOT/etc/conf/mfsys.d
	fi
	if [ ! -d $ROOT/etc/conf/sfsys.d ]
	then mkdir $ROOT/etc/conf/sfsys.d
	fi

	C=
	NET=
	NET2=
	NET3=
	VPIX=
	MERGE386=
	WEITEK='-DWEITEK'
	BUS=
	ARCH=
	MORECPP=
	NONETWORK=
	while [ -n "$1" ]
	do
	case "$1" in
		at386|AT386|at|AT)
			BUS=AT386
			ARCH=AT386
			CONF=${CONF:-$ROOT/etc/conf}
			;;
	#	380 chip support 
		at380|AT380)
			BUS=AT386
			ARCH=AT386
			MORECPP="$MORECPP -DAT380"
			;;
	   # entries for multibus.
		mb1|MB1)
			BUS=MB1
			ARCH=MBUS
			CONF=${CONF:-$ROOT/etc/conf}
			;;
		mb2|MB2)
			BUS=MB2
			ARCH=MBUS
			CONF=${CONF:-$ROOT/etc/conf}
			;;
		mb2at|MB2AT)
			BUS=AT386
			ARCH=MB2AT
			MORECPP="$MORECPP -DMB2AT"
			;;
		MB2SA|mb2sa)
			MORECPP="$MORECPP -DMB2SA"
			;;
		eisa|EISA)
			BUS=EISA
			ARCH=AT386
			MORECPP="$MORECPP -DEISA"
			;;
		mbus|MBUS)
			MORECPP="$MORECPP -DMBUS"
			;;
		i860)
			MORECPP="$MORECPP -Di860"
			;;
		BLTCONS)
			BLTCONS="-DBLTCONS"
			;;
		EVC)
			EVC="-DEVC"
			;;
		evga|EVGA)
			EVGA="-DEVGA"
			;;
		noevga|NOEVGA)
			EVGA=" "
			;;
		ev\-at|EV\-AT)
			BUS=AT386
			ARCH=EV-AT
			MORECPP="$MORECPP -DAT386"
			;;
		# end multibus support
		NOWEITEK|noweitek)
			WEITEK=''
			;;
		NOVPIX|novpix)
			VPIX=" "
			;;
		VPIX|vpix)
			VPIX="-DVPIX"
			;;
		NOMERGE386|nomerge386)
			MERGE386=" "
			;;
		MERGE386|merge386)
			MERGE386="-DMERGE386"
			;;
		enet|ENET|ethernet|ETHERNET|ether|ETHER|E-NET|e-net)
			NET2=ENET
			MORECPP="$MORECPP -DENET"
			;;
		slan|SLAN|sln|SLN|starlan|STARLAN)
			MORECPP="$MORECPP -DSTARLAN"
			NET=STARLAN
			;;
# debug turns on ASSERTs (see sys/debug.h)  for kernel logic checking
		debug|DEBUG)
			MORECPP="$MORECPP -DDEBUG=1"
			;;
		msdebug|MSDEBUG)
			MORECPP="$MORECPP -DMSDEBUGGER"
			;;
		-c)     shift
			CONF=${1:?"-c flag requires an argument."}
			;;
		nonet|NONET)
			NONETWORK="nonet"
			export NONETWORK
			;;
		clean|clobber)
			C=$1
			;;
		*)      echo unknown argument $1: ignored
			;;

	esac
	shift
	done
# fill in default values, default is PC/AT, no debugger
	BUS=${BUS:-AT386}
	ARCH=${ARCH:-AT386}
	CONF=${CONF:-$ROOT/etc/conf}
	VPIX=${VPIX:--DVPIX}
	MERGE386=${MERGE386:--DMERGE386}
	EVGA=${EVGA:--DEVGA}
	BLTCONS=${BLTCONS:--DBLTCONS}
	#EVC=${EVC:--DEVC}
	MORECPP="$MORECPP -D$BUS -D$ARCH $VPIX $WEITEK $MERGE386 $BLTCONS $EVGA $EVC"
	export BUS CONF MORECPP ROOT SRCDIR C NET ARCH NONETWORK
#
case "$C" in
clobber|clean);;
*)
# Build the Installable Driver Commands with the current mkuts values
if [ -f $ROOT/usr/src/cmd/idcmd/idcmd.mk ]
then
	( cd $ROOT/usr/src/cmd/idcmd
	echo "Building idcmd so that idmkunix and /unix are in sync"
	make -f idcmd.mk "ROOT=$ROOT" "BUS=$BUS" "ARCH=$ARCH" "CONF=$CONF" "MORECPP=$MORECPP" "NET=$NET" "NET2=$NET2" "NET3=$NET3" install clobber
	)
fi ;;
esac
# removed WEITEK stuff for MBx (set appropriatly above)
# Go do it
	cd $SRCDIR/i386
	make -f unix.mk $NONETWORK "ROOT=$ROOT" "BUS=$BUS" "ARCH=$ARCH" "CONF=$CONF" "MORECPP=$MORECPP" "NET=$NET" "NET2=$NET2" "NET3=$NET3" $C

fi
echo $0: done at `date`
exit 0