Fortinet PSU RPS is on Issue

[Synergysis]

Hi,

I'm getting PSU RPS status is on when using centreon plugins. and it says its critical.

Is this correct or should it be other way around? I also checked from the device itself the values are correct but 1 means on and 0 should off right?
Found it here : https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-check-power-supply-details-for-FortiGate/ta-p/193557#:~:text=diag%20hard%20deviceinfo%20rps&text=Main%20Power%201%20%3C%2D%20Indicates%20that,not%20covered%20in%20this%20article.

--plugin network::fortinet::fortigate::plugin
--mode hardware

Please correct me if I'm wrong
Thanx!

[lucie-dubrunfaut]

Hello :)

To facilitate the resolution of issues, please provide the command and the output (if possible with the --debug option) to properly isolate your problem. ;)
About the components status the maping in hardware mode line 134 shows:

my %alarm_map = (
    0 => 'off',
    1 => 'on',
);

In the case of what you show, it looks like that one of the PSUs is at 1 and the other at 0 which could explain the CRITICAL, but it would be easier if you provided us the plugin's output with the --debug option. And ideally if you can provide us an anonymized .snmpwalk (full snmpwalk of enterprise branch : snmpwalk -ObentU -v 2c -c public address .1.3.6.1.4.1 > equipment.snmpwalk) of your equipment to help us troubleshooting this case.