-
Notifications
You must be signed in to change notification settings - Fork 13
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Problems on fresh install of FreePBX 16 #83
Comments
I ran the following commands to fix ntp_config_enabled problems. Run at your own risk! Run You will need to run a similar command for ccm_address, but I'm not sure what should go in there right now. I believe the cause of this is not all the default values are not being put into the database. EDIT: My ntp_config_enabled fix was temporary. It is not staying in the DB. I will have to poke further. |
Hi all,
I'm having endless trouble with SCCP Manager on a fresh install of a FreePBX distro (SNG7-PBX16-64bit-2203-1) running FreePBX 16.0.19 with Asterisk 16.25.0.
chan_sccp is installed and appears to be running correctly. I then add version 14.3.0.13 of the module and install via fwconsole in the cli. This completes successfully and I then upgrade to 14.5.0.4 via fwconsole ma upgrade sccp_module.
After applying the config Sccp Connectivty shows and all seems ok, except all the Sccp Connectivity options are extremely slow to load – ~15 sec to load the Phones Manager and another ~15 sec to load the extensions list. Nothing is shown in the logs during this delay as far as I can see. This is repeated on every page. The rest of FreePBX is quick to load so I don't think it's a DNS issue as is often the case with a slow loads in FreePBX.
I manage to add a couple of phones and then I start receiving various PHP errors on commit, including:
(when trying to update devices)
(when trying to update server config)
I can't recover from these errors and can no longer make changes once they start happening.
I've never used sccp manager before so I'm a bit lost on troubleshooting the issue. I also don't understand why it wouldn't be working on a totally fresh distro install.
Any help appreciated.
-James
The text was updated successfully, but these errors were encountered: