Skip to content

Latest commit

 

History

History
35 lines (27 loc) · 2.18 KB

README.md

File metadata and controls

35 lines (27 loc) · 2.18 KB
Raw

Setup

A guide to setting up your Raspberry Pi

What you will need

Essential (for general use)

  • SD Card
    • We recommend an 8GB class 4 SD card, ideally preinstalled with NOOBS.
  • Display and connectivity cable
    • Any HDMI/DVI monitor and any TV should work as a display for the Pi. For best results, use one with HDMI input, but other connections are available for older devices.
  • Keyboard and mouse
    • Any standard USB keyboard and mouse will work with your Raspberry Pi.
    • Wireless keyboards and mice will work if already paired.
    • For keyboard layout configuration options see raspi-config.
  • Power supply
    • The Pi is powered by a USB Micro power supply (like most standard mobile phone chargers).
    • You'll need a good-quality power supply that can supply at least 2A at 5V for the Model 3B, or 700mA at 5V for the earlier, lower powered models.
    • Low current (~700mA) power supplies will work for basic usage, but are likely to cause the Pi to reboot if it draws too much power.

Optional

  • Ethernet (network) cable [Model B/B+/2/3 only]
    • An Ethernet cable is used to connect your Pi to a local network and the internet.
  • USB wireless dongle
    • Alternatively, you can connect to a wireless network using a USB wireless dongle, which will require configuration.
  • Audio lead
    • Audio can be played through speakers or headphones using a standard 3.5mm jack.
    • Without an HDMI cable, an audio lead is necessary to produce sound.
    • No separate audio lead is necessary if you're using an HDMI cable to connect to a monitor with speakers, as audio can be played directly through the display; but it is possible to connect one if you prefer to have the audio played through other speakers - this requires configuration.

Troubleshooting

For any issues during setup, search the forums for a solution. If you cannot find one, please post your problem, providing as much detail as possible.