Failed to find cloudbase-init install destination

[pankajmalhotra]

Trying to install windows 2012R2 [MAAS], getting following error:

============
32212254720 bytes (32 GB, 30 GiB) copied, 196.804 s, 164 MB/s
Running command ['partprobe', '/dev/sda'] with allowed return codes [0] (capture=False)
Warning: Not all of the space available to /dev/sda appears to be used, you can fix the GPT to use all of the space (an extra 356515840 blocks) or continue with the current setting?
Running command ['udevadm', 'settle'] with allowed return codes [0] (capture=False)
TIMED udevadm_settle(): 0.152
Searching for filesystem on ['sda'] containing one of: ['curtin', 'system-data/var/lib/snapd', 'snaps']
Running command ['lsblk', '--noheadings', '--bytes', '--pairs', '--output=ALIGNMENT,DISC-ALN,DISC-GRAN,DISC-MAX,DISC-ZERO,FSTYPE,GROUP,KNAME,LABEL,LOG-SEC,MAJ:MIN,MIN-IO,MODE,MODEL,MOUNTPOINT,NAME,OPT-IO,OWNER,PHY-SEC,RM,RO,ROTA,RQ-SIZE,SIZE,STATE,TYPE,UUID', '/dev/sda'] with allowed return codes [0] (capture=True)
Running command ['mount', '/dev/sda1', '/tmp/tmp4dffuaac'] with allowed return codes [0] (capture=False)
mount: /tmp/tmp4dffuaac: wrong fs type, bad option, bad superblock on /dev/sda1, missing codepage or helper program, or other error.
Running command ['mount', '/dev/sda2', '/tmp/tmp4dffuaac'] with allowed return codes [0] (capture=False)
Running command ['umount', '/tmp/tmp4dffuaac'] with allowed return codes [0] (capture=False)
Running command ['mount', '/dev/sda3', '/tmp/tmp4dffuaac'] with allowed return codes [0] (capture=False)
mount: /tmp/tmp4dffuaac: wrong fs type, bad option, bad superblock on /dev/sda3, missing codepage or helper program, or other error.
Running command ['mount', '/dev/sda4', '/tmp/tmp4dffuaac'] with allowed return codes [0] (capture=False)
Found path 'curtin' on device '/dev/sda4'
Running command ['umount', '/tmp/tmp4dffuaac'] with allowed return codes [0] (capture=False)
Running command ['mount', '/dev/sda4', '/tmp/tmpzjg1zprx/target'] with allowed return codes [0] (capture=False)
TIMED BLOCK_META: 202.456
finish: cmd-install/stage-partitioning/builtin/cmd-block-meta: SUCCESS: curtin command block-meta
start: cmd-install/stage-network/builtin/cmd-net-meta: curtin command net-meta
net-meta mode is 'custom'. devices=[]
writing to file /tmp/tmpzjg1zprx/state/network_config with network config: network:
config:

• id: ens160
  mac_address: 00:50:56:bb:5d:93
  mtu: 1500
  name: ens160
  subnets:
  • address: 105.133.6.65/23
    dns_nameservers:
    • 105.133.1.23
    • 105.133.1.24
      dns_search:
    • eng.stellus.in
      gateway: 105.133.6.1
      type: static
      type: physical
• address:
  • 105.133.1.23
  • 105.133.1.24
    search:
  • eng.stellus.in
    type: nameserver
    version: 1

finish: cmd-install/stage-network/builtin/cmd-net-meta: SUCCESS: curtin command net-meta
start: cmd-install/stage-extract/builtin/cmd-extract: curtin command extract
Installing sources: [{'type': 'dd-tgz', 'uri': 'http://105.133.7.80:5248/images/windows/amd64/generic/win2012hvr2/uploaded/root-dd'}] to target at /tmp/tmpzjg1zprx/target
start: cmd-install/stage-extract/builtin/cmd-extract: acquiring and extracting image from http://105.133.7.80:5248/images/windows/amd64/generic/win2012hvr2/uploaded/root-dd
finish: cmd-install/stage-extract/builtin/cmd-extract: SUCCESS: acquiring and extracting image from http://105.133.7.80:5248/images/windows/amd64/generic/win2012hvr2/uploaded/root-dd
Applying write_files from config.
finish: cmd-install/stage-extract/builtin/cmd-extract: SUCCESS: curtin command extract
start: cmd-install/stage-curthooks/builtin/cmd-curthooks: curtin command curthooks
running /tmp/tmpzjg1zprx/target/curtin/curtin-hooks
Running command ['/tmp/tmpzjg1zprx/target/curtin/curtin-hooks'] with allowed return codes [0] (capture=False)
finish: cmd-install/stage-curthooks/builtin/cmd-curthooks: SUCCESS: curtin command curthooks
start: cmd-install/stage-hook/builtin/cmd-hook: curtin command hook
Finalizing /tmp/tmpzjg1zprx/target
running /tmp/tmpzjg1zprx/target/curtin/finalize
Running command ['/tmp/tmpzjg1zprx/target/curtin/finalize'] with allowed return codes [0] (capture=False)
Traceback (most recent call last):
File "/tmp/tmpzjg1zprx/target/curtin/finalize.py", line 141, in
curthooks()
File "/tmp/tmpzjg1zprx/target/curtin/finalize.py", line 88, in curthooks
cloudbaseinit = get_cloudbaseinit_dir(target)
File "/tmp/tmpzjg1zprx/target/curtin/finalize.py", line 82, in get_cloudbaseinit_dir
raise ValueError("Failed to find cloudbase-init install destination")
ValueError: Failed to find cloudbase-init install destination
finish: cmd-install/stage-hook/builtin/cmd-hook: FAIL: curtin command hook
Traceback (most recent call last):
File "/curtin/curtin/commands/main.py", line 202, in main
ret = args.func(args)
File "/curtin/curtin/commands/hook.py", line 26, in hook
curtin.util.run_hook_if_exists(args.target, "finalize")
File "/curtin/curtin/util.py", line 900, in run_hook_if_exists
subp([target_hook])
File "/curtin/curtin/util.py", line 275, in subp
return _subp(*args, **kwargs)
File "/curtin/curtin/util.py", line 139, in _subp
raise ProcessExecutionError(stdout=out, stderr=err,
curtin.util.ProcessExecutionError: Unexpected error while running command.
Command: ['/tmp/tmpzjg1zprx/target/curtin/finalize']
Exit code: 1
Reason: -
Stdout: ''
Stderr: ''
Unexpected error while running command.
Command: ['/tmp/tmpzjg1zprx/target/curtin/finalize']
Exit code: 1
Reason: -
Stdout: ''
Stderr: ''
curtin: Installation failed with exception: Unexpected error while running command.
Command: ['curtin', 'hook']
Exit code: 3
Reason: -
Stdout: start: cmd-install/stage-hook/builtin/cmd-hook: curtin command hook
Finalizing /tmp/tmpzjg1zprx/target
running /tmp/tmpzjg1zprx/target/curtin/finalize
Running command ['/tmp/tmpzjg1zprx/target/curtin/finalize'] with allowed return codes [0] (capture=False)
Traceback (most recent call last):
File "/tmp/tmpzjg1zprx/target/curtin/finalize.py", line 141, in
curthooks()
File "/tmp/tmpzjg1zprx/target/curtin/finalize.py", line 88, in curthooks
cloudbaseinit = get_cloudbaseinit_dir(target)
File "/tmp/tmpzjg1zprx/target/curtin/finalize.py", line 82, in get_cloudbaseinit_dir
raise ValueError("Failed to find cloudbase-init install destination")
ValueError: Failed to find cloudbase-init install destination
finish: cmd-install/stage-hook/builtin/cmd-hook: FAIL: curtin command hook
Traceback (most recent call last):
File "/curtin/curtin/commands/main.py", line 202, in main
ret = args.func(args)
File "/curtin/curtin/commands/hook.py", line 26, in hook
curtin.util.run_hook_if_exists(args.target, "finalize")
File "/curtin/curtin/util.py", line 900, in run_hook_if_exists
subp([target_hook])
File "/curtin/curtin/util.py", line 275, in subp
return _subp(*args, **kwargs)
File "/curtin/curtin/util.py", line 139, in _subp
raise ProcessExecutionError(stdout=out, stderr=err,
curtin.util.ProcessExecutionError: Unexpected error while running command.
Command: ['/tmp/tmpzjg1zprx/target/curtin/finalize']
Exit code: 1
Reason: -
Stdout: ''
Stderr: ''
Unexpected error while running command.
Command: ['/tmp/tmpzjg1zprx/target/curtin/finalize']
Exit code: 1
Reason: -
Stdout: ''
Stderr: ''

Stderr: ''

[pankajmalhotra]

@ader1990,

Is there anything special needs to be done so that cloudbase-init get installed on windows iso image?

Steps which I am doing,

1. Download & mount iso windows image on windows 2016 server where Hyper-V is enabled.
2. Execute New-WindowsCloudImage -ConfigFilePath $configFilePath.
3. Once image is generated, then deploy it on VM.

Let me know if I am missing anything?
Thanks in advance