New device request?

[JonScaife]

Hi
Thanks for the great work on this. I'm using it to monitor BLE plant sensors all over the house and it works really well.
I wondered if you were accepting requests for other devices to consider supporting? I have an "Air Mentor Pro 2" which uses BLE. Someone has got it working with Samsungs "SmartThings" platform and I was able to connect to it from the bluetooth command line within HA, but my distinct lack of programming knowledge seems to have been too big a barrier to actually pulling meaningful data from it. If you are accepting requests please consider this device!
The code for the SmartThings implementation is at https://community.smartthings.com/t/successfully-integrated-air-quality-monitor-air-mentor-pro-2-in-smartthings-using-raspberry-pi/79574
Many thanks

[Ernst79]

Yes, looks very well possible. Based on the info in the link, I think it sends two messages.

first message

043E1B02010000A5808FE648540F0201060BFF222100b91963332d0145CC

I managed to translate this to:

result  ({'TVOC': 185, 'temperature': 24.99, 'temperature calibrated': 19.89, 'humidity': 61.34, 'IAQ': 325, 'rssi': -52, 'mac': '5448E68F80A5', 'type': 'Air Mentor Pro 2', 'packet': 'no packet id', 'firmware': 'Air Mentor', 'data': True}, None)

second message

043E1B02010000A5808FE648540F0201060BFF21212710000300030000CC

result  ({'co2': 10000, 'pm25': 3, 'pm10': 3, 'battery': 0, 'voltage': 0, 'rssi': -52, 'mac': '5448E68F80A5', 'type': 'Air Mentor Pro 2', 'packet': 'no packet id', 'firmware': 'Air Mentor', 'data': True}, None)

The battery and voltage sensor are most likely something else, the python script in the link you gave doesn't use this. My guess one of these is is something like "charging" or "connected to the main power" I will create a test version for you to find out. coming days. .

[Ernst79]

Moved this to a new issue, please discuss further in the issue #768